Searched for: collection%3Air
(1 - 20 of 545)

Pages

document
Wang, P. (author), Goverde, R.M.P. (author)
This paper proposes a novel approach for energy-efficient timetabling by adjusting the running time allocation of given timetables using train trajectory optimization. The approach first converts the arrival and departure times to time window constraints in order to relax the given timetable. Then a train trajectory optimization method is...
journal article 2019
document
Ren, M. (author), Wang, Shuzhong (author), Yang, Chuang (author), Xu, Haitao (author), Guo, Yang (author), Roekaerts, D.J.E.M. (author)
This work reports an experimental study on supercritical water oxidation of quinoline. Moderate preheat temperature (420 °C–510 °C) and initial concentration (1 wt%–10 wt%) are selected to address the possibility of utilizing the heat released during the reaction, in order to realize high conversion rate at relatively low preheat temperature....
journal article 2019
document
Wang, Zhaojun (author), Tian, B. (author), Boom, Remko (author), van der Goot, Atze Jan (author)
Dense calcium caseinate dispersions can be transformed into hierarchically fibrous structures by shear deformation. This transformation can be attributed to the intrinsic properties of calcium caseinate. Depending on the dispersion preparation method, a certain amount of air gets entrapped in the sheared protein matrix. Although anisotropy is...
journal article 2019
document
Zhang, Zhixia (author), Zhang, Long (author), Yan, Xinlin (author), Wang, Hongqiang (author), Liu, Yanyan (author), Yu, C. (author), Cao, Xiaoting (author), van Eijck, L. (author), Wen, Bin (author)
Br as solid electrolyte synthesized by a facile solid-state sintering. Different from other O-incorporated sulfides,...
journal article 2019
document
Soler Jofra, A. (author), Wang, R. (author), Kleerebezem, R. (author), van Loosdrecht, Mark C.M. (author), Perez Canestro, Julio (author)
/L). Granules were initially stratified with AOB in the external shell and NOB in the inner core at 20 °C. Once temperature was decreased progressively from 20...
journal article 2019
document
Maan, D.C. (author), van Prooijen, Bram (author), Zhu, Q. (author), Wang, Zhengbing (author)
We apply a 2-D horizontal process-based model (Delft3D) to study the feedback mechanisms that control the long-term evolution of a fringing intertidal flat in the Western Scheldt Estuary. The hydrodynamic model is validated using a comparison with measurements on the intertidal flat and the sediment transport module is calibrated against long...
journal article 2018
document
Zhu, Jianbo (author), Fang, Miao (author), Shi, Q. (author), Wang, Peng (author), Li, Qian (author)
The large scale of construction in mega projects leads to significant environmental and socioeconomic impacts; thus, the projects should also exhibit greater social responsibility. Adopting green supply chain management in the construction process is an important way to realize the goal of sustainable development of mega projects. Because the...
journal article 2018
document
Shen, Y. (author), Lindenbergh, R.C. (author), Wang, Jinguo (author), Ferreira, Vagner G. (author)
Bricks are the vital component of most masonry structures. Their maintenance is critical to the protection of masonry buildings. Terrestrial Light Detection and Ranging (TLidar) systems provide massive point cloud data in an accurate and fast way. TLidar enables us to sample and store the state of a brick surface in a practical way. This...
journal article 2018
document
Xiao, L. (author), Wang, M. (author), Schakel, W.J. (author), van Arem, B. (author)
Cooperative Adaptive Cruise Control (CACC) systems have the potential to increase roadway capacity and mitigate traffic congestion thanks to the short following distance enabled by inter-vehicle communication. However, due to limitations in acceleration and deceleration capabilities of CACC systems, deactivation and switch to ACC or human...
journal article 2018
document
Rans, C.D. (author), Michielssen, J. (author), Walker, M.S. (author), Wang, W. (author), Hoen-Velterop, Ludmila ’t (author)
A challenge in developing an in-depth understanding of the crack growth resistance of Additively Manufactured materials is the fact that their mechanical properties have been shown to be both process and part-geometry dependent. Up to now, no studies have investigated the influence of off-axis (beyond the three orthogonal build orientations)...
journal article 2018
document
Wang, F. (author)
This thesis provides a thorough analysis of the linearity characteristics of a CMOS image sensor. Firstly, this thesis analyzes the factors that cause the nonlinearity of the image sensors. These factors are then verified by simulation results of a proposed behavioral model and the measurements in a prototype chip. Secondly, different techniques...
doctoral thesis 2018
document
Wang, M. (author), Becker, T.M. (author), Schouten, Bob (author), Vlugt, T.J.H. (author), Infante Ferreira, C.A. (author)
To use high-temperature waste heat generated by diesel engines for onboard refrigeration of fishing vessels, an ammonia-based double-effect vapor absorption refrigeration cycle is proposed. Non-volatile ionic liquids are applied as absorbents in the double-effect absorption system. In comparison to systems using ammonia/water fluid, the...
journal article 2018
document
Zaminpardaz, S. (author), Wang, Kan (author), Teunissen, P.J.G. (author)
The Japanese Quasi-Zenith Satellite System (QZSS) has recently (October 2017) reached its first 4-satellite constellation. In this contribution, the standalone performance of this 4-satellite QZSS constellation is assessed by means of its triple-frequency (L1 + L2 + L5) real-time kinematic (RTK) integer ambiguity resolution and precise...
journal article 2018
document
Liang, Xinlian (author), Hyyppä, Juha (author), Kaartinen, Harri (author), Lehtomäki, Matti (author), Pyörälä, Jiri (author), Pfeifer, Norbert (author), Holopainen, Markus (author), Brolly, Gábor (author), Francesco, Pirotti (author), Hackenberg, Jan (author), Huang, Huabing (author), Jo, Hyun Woo (author), Katoh, Masato (author), Liu, Luxia (author), Mokroš, Martin (author), Morel, Jules (author), Olofsson, Kenneth (author), Poveda-Lopez, Jose (author), Trochta, Jan (author), Wang, D (author), Wang, J. (author), Xi, Zhouxi (author), Yang, Bisheng (author), Zheng, Guang (author), Kankare, Ville (author), Luoma, Ville (author), Yu, Xiaowei (author), Chen, Liang (author), Vastaranta, Mikko (author), Saarinen, Ninni (author), Wang, Yunsheng (author)
The last two decades have witnessed increasing awareness of the potential of terrestrial laser scanning (TLS) in forest applications in both public and commercial sectors, along with tremendous research efforts and progress. It is time to inspect the achievements of and the remaining barriers to TLS-based forest investigations, so further...
journal article 2018
document
Wang, H. (author), Liu, X. (author), Apostolidis, P. (author), Scarpas, Athanasios (author)
Crumb rubber-modified bitumen (CRMB) has been utilized in the asphalt paving industry for decades due to its various benefits. The complex interaction between bitumen and crumb rubber as well as the addition of warm-mix additives makes the typical laws of Newtonian fluids insufficient to describe the behaviors of highly modified bituminous...
journal article 2018
document
Muñoz Sierra, Julian (author), Oosterkamp, M.J. (author), Wang, W.W. (author), van Lier, J.B. (author), Spanjers, H. (author)
on the...
journal article 2018
document
Zhu, Jianbo (author), Shi, Q. (author), Wu, Peng (author), Sheng, Zhaohan (author), Wang, Xiangyu (author)
In the process of internationalization of construction contractors, international enterprises as main contractors (IMC) need to consider whether part of the contract should be subcontracted to local subcontractors (LSC) to gain a competitive advantage when competing with local main contractors (LMC). The involvement of local subcontractors...
journal article 2018
document
Wang, Y. (author), Kapteijn, F. (author), Makkee, M. (author)
. The transient...
journal article 2018
document
Wang, W. (author), Rans, C.D. (author), Benedictus, R. (author)
Mechanically fastened joints are susceptible to the presence of multiple-site damage (MSD) cracks in the critical fastener row. Different from the MSD growth in joints consisting of metallic substrates, the two coupled metal crack growth and interfacial delamination propagation failure mechanisms in Fibre Metal Laminates (FMLs) make the...
journal article 2018
document
Wang, Haoyu (author), Markine, V.L. (author)
Transition zones in railway tracks are the locations with considerable variation in the vertical stiffness of supporting structures. Typically, they are located near engineering structures, such as bridges, culverts, tunnels and level crossings. In such locations, the variation of the vertical stiffness and the differential track settlement...
journal article 2018
Searched for: collection%3Air
(1 - 20 of 545)

Pages