Searched for: contributor%3A%22Boom%2C+R.+%28promotor%29%22
(1 - 14 of 14)
document
Visser, H. (author)
Ladle metallurgical processes constitute a portion of the total production chain of steel from iron ore. With these batch processes, the hot metal or steel transfer ladle is being used as a reactor vessel and a reagent is often injected in order to bring the composition of the hot metal or steel to the specification of the final product. To...
doctoral thesis 2016
document
Adema, A.T. (author)
doctoral thesis 2014
document
Qu, Y. (author)
The HIsarna is a coal-based smelting reduction process for ironmaking to drastically reduce CO2 emission and is one of the most promising alternative ironmaking processes under development in the world. The furnace consists of two inter-connected reactors: i) a smelting cyclone, ii) a smelting reduction vessel. The smelting cyclone is expected...
doctoral thesis 2013
document
Song, Q. (author)
The blast furnace consumes a large amount of high quality metallurgy coke (size 35-80 mm) in addition to ore in the form of pellets and sinter. This coke is the coarse fraction, derived from the coke plant. The fine fraction (8 -35 mm), arise after sieving, named nut coke, can’t be directly used in blast furnace. The fraction of smaller than 8...
doctoral thesis 2013
document
Santillana, M.B. (author)
Nowadays a vast majority of the steel produced worldwide is via the continuous casting process route because this is the most low-cost, efficient and high quality method to mass produce metal products in a variety of sizes and shapes. Most of the continuous casters are the initial manufacturing step of a product which is very close to the final...
doctoral thesis 2013
document
Zhang, Z. (author)
doctoral thesis 2013
document
Zhu, G. (author)
Aerospace aluminium alloys (7xxx and 2xxx series Al alloy) is one of the important Al alloys in our life. The recycling of aerospace Al alloy plays a significant role in sustainable development of Al industry. The fibre reinforced metal laminates GLARE including 67 wt.% 2024 Al alloy was used as upper fuselage in Airbus A380, but the solution...
doctoral thesis 2012
document
De Wit, F.M. (author)
doctoral thesis 2012
document
Tiekink, W.K. (author)
doctoral thesis 2012
document
Georgalli, G.A. (author)
doctoral thesis 2012
document
Kromhout, J.A. (author)
doctoral thesis 2011
document
Wittebrood, A.J. (author)
Aluminium brazing sheet is the material of choice to produce automotive heat exchangers. Although in Dutch the official translation of aluminium brazing sheet is “aluminium hardsoldeerplaat” the English name is used in the industry. Aluminium brazing sheet is basically a sandwich material and consists of an aluminium core alloy, typically an...
doctoral thesis 2009
document
Meskers, C.E.M. (author)
Design for consumer products such as cars and electronics requires the selection and combination of various materials. At the end of the product life, the product has to be recycled back to materials suitable for manufacture of new products. To evaluate the sustainability of a material cycle metrics are necessary that quantify the impact of...
doctoral thesis 2008
document
Scheepers, E. (author)
This study imparts a scientific perception of a phosphorous-producing submerged arc furnace never seen before; a proverbial fingerprint that can improve problem identification, disturbance diagnostics, process prediction, dynamic modelling and model predictive control of this type of furnace. It successfully incorporates accurate, multi-field...
doctoral thesis 2008
Searched for: contributor%3A%22Boom%2C+R.+%28promotor%29%22
(1 - 14 of 14)