Searched for: contributor%3A%22Bossche%2C+A.+%28mentor%29%22
(1 - 20 of 21)

Pages

document
Liu, Qingxin (author)
Most injuries in football occur in the lower extremities due to high muscle stress. To prevent such injuries, the Dutch Football Association (KNVB) and the Delft University of Technology developed the Smart Sensor Shorts, an inertial sensor-based tracking system measuring the athlete’s lower body kinematics, to improve physical load estimates...
master thesis 2023
document
Lindeman, Pim (author)
Distributing power and data around a garment is a common problem in sensor enabled e-textiles, as connecting separate electronic subsystems together using connectors and wires has proven to be unreliable and cumbersome. In this work a solution is presented that will eliminate the connectors by using two pairs of short-range wireless inductive...
master thesis 2022
document
Abdellaoui, Zakaria (author)
In football, most of the injuries occur in the lower extremities of the athletes. The leading cause of this is high muscle stress during explosive actions. To be able to prevent injuries, the Dutch Football Association (KNVB) and Dutch Hockey Association (KNHB) are working on smart sensor shorts in collaboration with the Delft University of...
master thesis 2022
document
Kolukisaoğlu, Tom (author)
This report presents a proof-of-concept for a sensor measuring the ionic concentrations in sweat using cyclic voltammetry. Development is focused on feasibility of the sensor. Theoretical evaluations of voltammetry as a working principle and its physical and electrochemical foundations are guiding principles of the design. The sensor is then...
master thesis 2022
document
Burgers, Bastiaan (author)
Decreasing injuries in football is a topic of interest for the KNVB and KNHB. To reach this goal, the use of smart sensor pants is researched. The data will be used to develop models for finding injury risk factors that are related to movements. Currently, the system is capable of reading out the IMUs and storing the data on an SD-card, for post...
master thesis 2021
document
Newadj, Kiren (author)
Clean drinking water is still not widely available around the globe and therefore remains an unsolved issue. In fact, 1 in 9 people lack daily access to safe water and sanitation. Groundwater is a water supply source that needs minor treatment and thereby presents itself as a good solution to this global issue. Especially in development...
master thesis 2019
document
Verhoef, Merel (author), Martin Hoogerwaard, Conchita (author)
An extraction channel cleaning company wanted a grease thickness sensor to be developed that would send the data via the internet so that information on the thickness could be accessed remotely. This system consists of two parts: the sensor part and a communications part. This report is on the sensor part, which uses a change in capacitance of...
bachelor thesis 2018
document
van Lith, Niels (author), Garst, Swier (author)
The goal of this project is to identify the most promising measurement method and strategy for measuring the thickness of grease and to design a sensor module with electronic read-out and communication module. This project has been split into two parts: a sensor implementation and a communication system. This report describes the design and...
bachelor thesis 2018
document
van der Lingen, Elke (author), van Leenen, Ryan (author)
The cleaning company "VETkanaal" requested a sensor system that measures the thickness of a grease layer within kitchen extraction ducts independently and is able to send this to an online platform. The goal of this project is to find an acoustic implementation of the sensor and be able to apply it. It appeared that measuring a shift in...
bachelor thesis 2018
document
Middelburg, L.M. (author)
master thesis 2016
document
Kunkels, L.B. (author), Belier, J.H. (author)
This study is done as part of creating a groundwater-analyzing sensor system. This thesis elaborates on finding a cost-efficient way of implementing a telecommunications channel between a measuring node and a data-server, together with forming an energy-efficient power supply system that powers a system over a cable of 60metres. The cellular...
bachelor thesis 2016
document
Van Remundt, M. (author), Witte, T. (author)
This thesis describes the work of two students who designed the control system of a stand-alone water well measuring system, named SubDowser. The project was done by order of a proposal from the start-up company SkyDowser. The total thesis group, consisting of three subgroups, was asked to build a working prototype which could measure the water...
bachelor thesis 2016
document
van Beelen, R.C. (author), de Groot, S.C.A. (author)
Deze thesis beschrijft de ontwerpkeuzes, het ontwerp en het begin van de implementatie van een sensorsysteem dat voor e12,50 aan componenten de waterdiepte, temperatuur en conductiviteit meet in waterputten. Aan de hand van de temperatuur en de conductiviteit kan de zoutconcentratie benaderd worden. Er is gekozen voor een combinatie van nieuwe...
bachelor thesis 2016
document
Hogenhout, G. (author), Hogenhout, K. (author)
Deze thesis is geschreven in het kader van het bachelor eindproject van de TU Delft in samenwerking met het bedrijf IT Motions. De opdracht van dit bedrijf was een prototype te ontwikkelen van Babyshell. BabyShell is een apparaat dat moeders uit derdewereldlanden advies geeft tijdens de zwangerschap en verder helpt met het (op)voeden van hun...
bachelor thesis 2015
document
Cheung, T. (author), Van Leeuwen, L.T.J. (author)
Voor het Bachelor Afstudeer Project van groep I is BabyShell ontwikkeld. BabyShell is een draagbaar apparaat dat in staat is om jonge ouders en zwangere vrouwen te helpen om een voorlopige diagnose te stellen van medische problemen van hun kinderen. Ook is BabyShell in staat om temperatuur op te nemen en belangrijke data bij te houden zoals...
bachelor thesis 2015
document
Bakker, J.P. (author), Jongeling, A.C.G. (author)
In ontwikkelingslanden zijn er nog altijd veel problemen met de gezondheid van zwangere vrouwen en jonge kinderen. Daarom is voor dit Bachelor afstudeerproject BabyShell ontwikkeld: een draagbaar apparaat dat onafhankelijk is van het stroomnet en door middel van een vraag-antwoord proces diagnoses voor medische problemen kan stellen. BabyShell...
bachelor thesis 2015
document
Lemmens, E. (author), Jansen, M. (author)
This bachelor thesis describes the development of a sensor system for measuring the cell concentration in small bio-reactors. The study was conducted at Delft University of Technology on behalf of Applikon Biotechnology B.V. The MicroMatrix of Applikon is used for experimental determination of the optimal conditions for bioprocesses in...
bachelor thesis 2014
document
Van den Hoorn, J.C. (author), Van der Kemp, J.W.F. (author)
This thesis describes a bachelor graduation project of the study Electrical Engineering at Delft University of Technology. The purpose of this project is to develop an impedance sensor that can measure the cell concentration in a micro-bioreactor. This bioreactor will be used to investigate the optimal cell growth conditions of a cell culture....
bachelor thesis 2014
document
Keijsers, J.G.M. (author), Mahabir, A.S.U. (author)
This thesis was written for the bachelor’s final project, of the study Electrical Engineering. It describes the design of a cell concentration sensor. A proof of concept was designed which is able tomeasure the cell concentration of yeast in a suspension by using sensors which measure the impedance and optical properties of the suspension. The...
bachelor thesis 2014
document
Chaeron, S.R.A. (author)
A post-Colon Surgery Optical Measurement Sensor for Early Detection of Bacteria KEY WORDS: Near-Infrared, Light Emitting Diodes, Photodiode, water absorption. PURPOSE: Bacteria detection after a colon surgery is an essential tool to prevent infection of the patient. With this aim we are developing an efficient miniaturized optical measurement...
master thesis 2008
Searched for: contributor%3A%22Bossche%2C+A.+%28mentor%29%22
(1 - 20 of 21)

Pages