Searched for: contributor:"Ernst, L.J. (promotor)"
(1 - 17 of 17)
document
Rezaie Adli, A.R. (author)
This thesis comprises a thorough study of the microelectronics packaging process by means of various experimental and numerical methods to estimate the process induced residual stresses. The main objective of the packaging is to encapsulate the die, interconnections and the other exposed internal components by providing mechanical protection,...
doctoral thesis 2017
document
Öztürk, B. (author)
Adhesives based on thermoset polymers are used as thermal and electrical interfaces. These adhesives are filled with different particles in order to meet the requirements of heat transfer and electrical properties. Due to the reliability requirements of automotive applications, they are required to have excellent bulk and interface properties....
doctoral thesis 2015
document
Akram, M. (author)
Major industrial sectors like automotive, aerospace and others are increasingly using polymer composites in their structural parts. Polyimide sheet and adhesives, are high performance polymers. They are widely used in various engineering applications due to their excellent thermal, mechanical and chemical properties and their resistance to...
doctoral thesis 2015
document
Sadeghinia, M. (author)
Thin layers of dissimilar materials are used in most microelectronic components in order to achieve special functional requirements. Generally, the interface between two adjacent materials forms a weak link, not only because of the relatively low delamination strength, but also because of the existing mismatch in thermo-mechanical properties,...
doctoral thesis 2013
document
Schlottig, G. (author)
This book describes a setup that allows to delaminate the Silicon-to-Molding Compound interface for obtaining interfacial fracture parameters: the Mixed Mode Chisel setup (MMC). With this device for the first time the delamination can be initiated and propagated, while preventing the occurrence of random brittle fracture in one or both of the...
doctoral thesis 2012
document
Heru Utomo, B.D. (author)
Dyneema (Ultra High Molecular Weight Polyethylene – UHMW PE) is a high performance material that is used in many applications. These applications vary from leisure articles such as sails and kite wires to surgical wires and personal protection products. The reason that Dyneema outperforms many other materials is that it possesses a combination...
doctoral thesis 2011
document
De Vreugd, J. (author)
doctoral thesis 2011
document
Nakka, J.S. (author)
This research work is aimed to understand the effect of resin chemistry on the physical properties (e.g. moduli, viscoelasticity, moisture uptake, coefficient of thermal expansion) of cured aromatic epoxy-amine thermoset resins. This understanding will result into a good first approximation of the final properties. As a consequence in future it...
doctoral thesis 2010
document
Wang, L. (author)
Conventional IC packages form a rigid shell around silicon IC dies. Their purpose is to provide environmental protection, electrical interconnect and heat dissipation. Despite the fact that majority of current silicon IC?s are realized in a very thin top layer of the silicon substrate (<10µm), the typical thickness of packaged IC dies generally...
doctoral thesis 2010
document
Van Driel, W.D. (author)
Microelectronics have pervaded our lives for the past fifty years, with massive penetration into health, mobility, safety and security, communications, education, entertainment and virtually every aspect of human lives. The main technology drivers that enabled this expansion are miniaturization and integration. The combination of these two has...
doctoral thesis 2007
document
Van 't Hof, C. (author)
Chemical shrinkage and simultaneous build-up of mechanical properties in curing thermosets leads to the build-up of residual stresses and strains. Depending on the constraints these may cause interface failure, dimensional inaccuracy or failure in the thermoset or its surrounding structure. The present work aims at both an improved methodology...
doctoral thesis 2006
document
Liu, C. (author)
doctoral thesis 2004
document
Septanika, E.G. (author)
doctoral thesis 1998
document
Ten Busschen, A. (author)
doctoral thesis 1996
document
Zhang, L. (author)
doctoral thesis 1995
document
van den Berg, G. (author)
doctoral thesis 1995
document
Bout, A. (author)
doctoral thesis 1992
Searched for: contributor:"Ernst, L.J. (promotor)"
(1 - 17 of 17)