Searched for: contributor:"Flipsen, S.F.J. (mentor)"
(1 - 20 of 29)

Pages

document
de Hoop, J. (author)
Since post-consumer plastics have less well defined properties compared to virgin plastics they are not widely applied in consumer products. This thesis studied the unique qualities of post-consumer plastics. Tensile tests were performed, studying the impact qualities of recycled HDPE sheets. Leading to the optimisation of sheet production of...
master thesis 2017
document
Faber, T. (author)
Currently location trackers for valuables have a short battery life, demanding an intensive battery maintenance experience of the user. Discharged batteries mean a malfunctioning product, resulting in a false sense of security by the user. The incentive of this thesis is to explore the opportunities in energy harvesting technologies, low power...
master thesis 2016
document
Rijksen, M. (author)
This thesis describes the graduation process and result for the faculty of Industrial Design Engineering (IDE) from the Delft University of Technology. This graduation project accomplishes the masters degree Integrated Product Design (IPD). The project starts with an analysis of the current tool and its context. This phase of the process is...
master thesis 2016
document
Van Bohemen, G.L.A. (author)
master thesis 2016
document
Floor, J.W. (author)
3D printing using material extrusion is increasingly considered as a means to produce not just prototypes, but also final parts. This has accelerated research of the strength of printed parts. With 1461 printed tensile bars tested, this study adds a systematic investigation to the existing body of knowledge, assessing the influence of layer...
master thesis 2015
document
Deshpande, G.R. (author)
Technological advancements in Photovoltaic (PV) technology has made possible for the PV cell implementation in variety of consumer products. The design of PV powered consumer electronic products is still immature due to low understanding about the technology, especially in low irradiance indoor environment where consumer products are often used....
master thesis 2015
document
Sarijoen, R.G. (author)
The East African motorcycle transport industry is one of the fastest growing motorcycle markets in the world. This has been due to a tremendous increase in wealth and standard of living over the last decades and the developments these factors trigger, such as road/infrastructure improvement and increase in quantity and quality of product...
master thesis 2015
document
De Jong, T. (author)
The RooT Reverse Tilt Suspension platform is an integrated suspension mechanism which delivers a unique experience: “like riding a magic carpet, playful, fluent and self-balancing”. With their innovation RooT wants to bring a positive impulse to green mobility on the electric scooter market. The key to RooT’s innovation is a rod mechanism which...
master thesis 2014
document
Van den Herik, P. (author)
User research validated the need for a compact, pedestrian operated electric tow tractor that is able to pull and push a wide variety of loads on wheels, such as roll containers, shopping trolleys and industry trolleys, in order to relieve the end-user’s physical effort. The main product drivers were related to the size of the Multi Mover-S (MM...
master thesis 2014
document
Güvendik, M. (author)
The lack of literature on using life cycle assessment (LCA) for increasing environmental performance raises the need for concepts or eco-design tools to be combined with LCA to answer the question of how to strategize and take actions based on LCA results. This study intends to address this need by using mobile phones as a case study and...
master thesis 2014
document
Haest, K.P. (author)
Two important barriers in adopting rooftop PV are the (perceived) lack of compatibility with current (tiled) roofs and the poor aesthetics of roof-mounted PV panels. This has led to the idea of PV roof tiles, which could take away these barriers. The Delft-based company FlexSol Solutions has the unique capability of curving highly efficient...
master thesis 2014
document
Bosman, G.L. (author)
For this research a pilot project is conducted focusing on the wood wastestream from the consumer market. The waste generation growth is higher than the population growth due to increased consumption. Therefore, keeping materials in continuous loops for efficient waste management and to provide the materials for future generations gains...
master thesis 2014
document
Bos, G.A. (author)
This thesis represents a graduation project that was done for the early stage startup: Spaac. The alternative title is: A Design Intervention to Stimulate E-Bike Acceptance. A bicycle was designed to appeal to young commuters that currently do not ride e-bikes because of the social stigma. The Cultural Strategy of Douglas Holt was used to come...
master thesis 2013
document
Boukens, M.J.M. (author)
This graduation project focused on the scooter. Scooters offer cheap, flexible and reliable transport. However, their emissions are quite high. This leads to the problem description for this project: energy efficiency in current scooters is not as high as it can be. A lot of improvement can be gained in the vehicles efficiency by regenerating...
master thesis 2013
document
Sófalvi, J. (author)
This report documents the design and development of an affordable, appealing and well-performing solar handheld-device charger (the Solution), which fits the needs of the targeted users, who live in developing countries, have no or only limited access to electricity, but can afford to, and have the aspiration to own a mobile phone. The...
master thesis 2013
document
De Mooij, G.L.T. (author)
The RooT is an electric scooter designed to create a new user experience that enhances the advantages of electric mobility: it is quiet, clean and intuitive. It moves with you like a “flying carpet”. In the previous projects, the RooT concept has already been developed until a first prototype. This first prototype was still a very primitive...
master thesis 2012
document
Peters, V.A.J. (author)
In this project, an attempt was made to embed telemetry in one of the harshest environments one can find itself in. The extremeness of the shocks was identified as the most important hurdle to take in order to install an electronic device on a RIB (rigid inflatable boat). Shocks up to 12G in the vertical direction where measured, when the RIB...
master thesis 2012
document
Boersen, J. (author)
Bij het telen van fruit is er een voortdurende strijd gaande tegen schimmels, virussen en bacteriën. Deze infecties kunnen op een duurzame en biologische manier worden bestreden met UV licht. Met behulp van het juiste product-concept kan deze techniek betaalbaar, betrouwbaar en duurzaam aan tuinders worden aangeboden.
master thesis 2012
document
Soekhoe, R.N. (author)
The master thesis show the design process and presentation of the design for a construction that allows for pv-panels to be integrated in dam or dike walls.
master thesis 2011
document
Mense, R.T. (author)
Development of an electric drive for the Rollz rollator in order to create a mobility aid that holds the middle between a rollator and a mobility scooter. The security of an electric drive to fall back on in case of need gives elderly the confidence to walk more often and leave the mobility scooter at home.
master thesis 2011
Searched for: contributor:"Flipsen, S.F.J. (mentor)"
(1 - 20 of 29)

Pages