A Hybrid Step-Up DC-DC Converter and A VCSEL Diode Driver

In today's highly information-based society, portable smart devices are helping everyone all the time. At the same time, many of them need corresponding power management modules to provide them with stable power from the Li-ion battery. Since different functional modules require different voltage levels, a special DC-DC converter or driver must...

A 3-Mode Wide Operational Range Reconfigurable Regulating Rectifier for Wireless Power Transfer

This article presents a novel wide operational range reconfigurable regulating rectifier for wireless power transfer. The proposed 1X/2X/3X rectifier achieves wide range voltage regulation without global loop control to minimize the area occupation. Compared with previous work, more working modes and greater magnification allow the proposed...

The Sensor Roller: A Piezoelectric Energy Harvesting Roller in a Bearing for Self-Sustained IoT Sensors

With the high-speed development of the Internet of Things (IoT), powering such a massive number of wireless IoT sensors with chemical batteries become more and more unpractical. To make the IoT sensors self-sustained, Piezoelectric Energy Harvesting (PEH) technology provides an excellent solution to power the devices with a relatively long...

Compact and Scalable Capacitorless Linear Voltage Regulator for Power Management Integrated Circuits

The current generation of power management integrated circuits require fully integrated, low cost and low power solutions for voltage regulation. As final blocks in the internal power supply chain, excellent performance linear voltage regulators are required, especially in terms of dynamic response and stability. Since many voltage regulators...

Wideband Hybrid pipeline ADC

To be able to cope with the demands of next generation radar applications, a bandwidth of 400MHz is required. The SAR assisted CT ∆Σ ADC provides an energy efficient ADC, but needs improvements to cope with the bandwidth enlargement. This thesis examines the front end components and thus initially focuses on resolving the issues in the front end...

Classification Algorithm for Early Detection of Atrial Fibrillation: The Development of a Supervised Learning Method Using Photoplethysmography Signals for an ARM Processor

Atrial fibrillation (AF) is the most common type of cardiac arrhythmia occurring in around 0.5% of the world population. AF is characterized by the rapid and irregular beating of the atrial chambers of the heart, which can cause lead to strokes and other heart-failures. To prevent these consequences the early detection of AF is paramount. Using...

Uncertainty of a RMS Power Detector

The accuracy of a true-RMS detector board based on the Analog Devices LTC5596 is determined by measuring the input power and the output voltage. A number of samples of the output voltage is taken and the mean and standard deviation is shown. These measurements are done for single-tone excitation with a direct connection and over-the-air setup,...

A Fully-Passive Noise-Shaping SAR for use in a Zoom ADC

The ΔΣ analog-to-digital converter (ADC) is widely used in audio applications for its high resolution. However, it is less energy efficient compared to Nyquist Rate ADCs. The growing demand for portable and wearable devices poses a more stringent power-efficient requirement on the audio system, and the traditional ADCs architecture is hard to...

Ultra-Low Idle Power Class-D Amplifier

Class-D amplifiers are widely used in automotive audio systems because of their high efficiency. In modern car sound systems, multiple amplifiers are used to provide good audio effect. However, typical class-D amplifiers have a high idle-power, which can drain the battery quickly. To solve this problem, an ultra-low idle power class-D amplifier...