Searched for: contributor:"Rodrigo Mor, Armando (graduation committee)"
(1 - 12 of 12)
document
Booms, Daniel (author)
Most ocean-going ships are fitted with an impressed current cathodic protection (ICCP) system. The currents impressed by this system onto the seawater find their way to corroding parts of the ship’s hull, and prevent the hull from corroding. The electric field resulting from the currents around the ship is called the electric signature. This...
master thesis 2019
document
Alshehri, Feras (author)
The share of renewable energy sources in the electricity generation is expected to maintain a steady growth in the future driven by economic and environmental reasons. However, these renewable sources such as wind and solar have fluctuating power output. This fluctuation causes strain on the power system and can cause imbalances between...
master thesis 2018
document
Novikov, Alexander (author)
This thesis investigates the performance of distance protection function of actual relay placed on high voltage 400 kV transmission line in a system with high photovoltaic (PV) sources penetration. The benchmark model of system with radial connection of PV plant and conventional power plant was designed in the platform of RSCAD software. By...
master thesis 2018
document
Anjum, Satayish Bint-e- (author)
There is a rapid increase in the off-shore wind farms and the interconnection between countries which results in an increased energy transfer over longer distances. High voltage DC (HVDC) cables can transfer this energy in a reduced cost and efficient way in contrast with high voltage AC (HVAC) along with many other benefits. For the HVDC cables...
master thesis 2018
document
Gali, Sundeep (author)
In order to make the bifacial yield prediction models commercially available, a lot of work their development, improvement and validation is being done by many research institutes. At Energy research center of the Netherlands (ECN), one such model is under development. In this project, couple of aspects were investigated to give better insight...
master thesis 2017
document
Nikolopoulou, Anastasia (author)
Wind constitutes a dominant form of sustainable energy that is expected to grow rapidly in the years to come. Increased inverter-based wind power penetration may however endanger grid stability and reliability, if not enriched with the capability to provide crucial ancillary services to the grid, such as frequency regulation. In order for the...
master thesis 2017
document
Gbadamosi, Abdulrasaq (author)
The accuracy of modelling distribution networks plays a very important role in analysing the stability of transmission systems. In recent years, due to the surge in the integration of renewable energy resources via power electronic interfaces, distribution networks are evolving from passive networks to modern active networks. This means that...
master thesis 2017
document
Velez Terreros, Fabricio (author)
Increasing wind generation causes displacement of conventional power plants with Synchronous Generators in electrical power systems. This condition leads to less inertia, less controllability and a degraded damping performance in the electrical systems. Studies of stability of the power system attempt to analyze this issues. Rotor angle...
master thesis 2017
document
Liu, Riqian (author)
There are two existing surface passivation principles. Passivation of unsaturated Si bonds is called chemical passivation. Surface passivation can also be achieved by shielding the minority charge carriers from the semiconductor interface by means of an electric field. This method is referred to as field-effect passivation. <br/>To test the...
master thesis 2017
document
Dedi Mahendra, Dedi (author)
As the primary protection of high voltage (HV) and Extra high voltage (EHV) transmission networks, distance protection needs to operate properly under all possible fault conditions. It needs to operate as fast as possible for internal fault, while it also must be able to discriminate between the internal and the external faults to prevent...
master thesis 2017
document
Kok, Wim (author), Hoogland, Andy (author)
Problem Definition<br/>This bachelor final project was an assignment given by the start up Momo Medical named: "Improving health care with technology". This project was to use their existing technology and ideas to create a system to prevent pressure ulcers. Pressure ulcer are the medical condition that happens when a patient is left too long in...
bachelor thesis 2017
document
Brinkhorst, Douwe (author), Liesker, Bas (author)
The founders of Momo Medical envisioned a health care product that would help nurses worldwide with pressure ulcer prevention. Pressure ulcers are a chronic wound that affects the skin of patients who do not regularly change bed posture. As it currently stands, nurses lack the manpower and time to change the postureof patients in a timely manor....
bachelor thesis 2017
Searched for: contributor:"Rodrigo Mor, Armando (graduation committee)"
(1 - 12 of 12)