Searched for: contributor:"Schlangen, E. (graduation committee)"
(1 - 6 of 6)
document
Feij, Jeroen (author)
In floors without dilation joints drying shrinkage cracking can occur. Shrinkage reducing agents (SRAs) can reduce the amount of drying shrinkage and improve the durability of the concrete structure. The mechanism of shrinkage reduction and the influences on the hydration process and development of mechanical properties of the SRA Sika Control...
master thesis 2020
document
van der Linde, Judith (author)
Concrete columns, in almost every shape, can be created by concrete printing. The formwork will be printed and subsequently filled with traditional concrete. Within this research, the influence of concrete printed formwork on the load bearing capacity of a printed column is determined. The research is performed on a small concrete column, from...
master thesis 2020
document
Harrass, Othman (author)
Strain Hardening Cementitious Composite (SHCC) is a new type of concrete that is able to control the crack-width in concrete structures. The application of this material in the tension zone of hybrid concrete structures is thus of interest in practice. The interfacial behavior for these hybrid structures is something that is of importance for...
master thesis 2020
document
van Overmeir, Anne (author)
3D concrete printing is an additive manufacturing method that uses a printing robot to build 3D concrete elements. In the last decade, several 3D concrete printing techniques have been developed and extensive research has been conducted on suitable concrete mixes, the printing process and the material and mechanical properties of the finished...
master thesis 2020
document
Awasthy, Nikhil (author)
The performance of concrete is usually governed by its "strength" and "stiffness" properties. As most of the concrete structures are usually designed to last in service for a period of about half a century, it is important to understand the development of these "strength" and "stiffness" properties over the course of time. Based on the standard...
master thesis 2019
document
Pipintakos, Georgios (author)
The increasing traffic load has led to the use of polymer modifiers in bituminous mixes in order to improve the performance and the durability of the pavement structures. Epoxy is a thermoset material which ensures enhanced fatigue performance and improved mechanical characteristics when used to modify bituminous materials. However, unlike...
master thesis 2018
Searched for: contributor:"Schlangen, E. (graduation committee)"
(1 - 6 of 6)