Searched for: contributor%3A%22van+der+Zwaag%2C+S.+%28mentor%29%22
(1 - 20 of 35)
Pages
- 1
- 2
- document
- Cornelisse, S.P. (author) master thesis
- document
- van den Hondel, A.W.M. (author) master thesis 1994
- document
- Silalahi, V.M.M. (author) master thesis 1994
- document
- , P.J. van der Wolk (author) master thesis 1995
- document
- Coorens, S. (author) master thesis 1996
- document
- Vooijs, S.J. (author) master thesis 1997
- document
- Remijn, P.G.W. (author) master thesis 1997
- document
- Maas, F.A.M. (author) master thesis 1997
- document
- Fu, Y. (author) master thesis 1998
- document
- Rolin, V. (author) master thesis 2000
- document
-
Lemmen, H.J.K. (author)The research of this thesis is focused on the optimization of laser beam welding of PMlOOO with respect to its high temperature mechanica! properties. This nickel chromium alloy is used for the thermal protection system of the re-entry test vehicle of ESA; Expert. With respect to the ceramic tiles which are used in conventional thermal...master thesis 2005
- document
-
De Jong, M. (author)This thesis studies precipitation processes in the Aluminium 7000 series using quantum mechanical total energy calculations. The emphasis is laid on studying the energetics of the various transient phases involved in precipitation of the 5 most important strengthening precipitates. Bulk, strain and interface effects are studies separately, in...master thesis 2010
- document
- Deutz, Daniella (author) master thesis 2013
- document
-
Van Loock, F. (author)This thesis investigates the shear strain-driven energy harvesting performance of compliant piezoelectric composite material systems. A characterization study was performed to observe and quantify the piezoelectric shear coupling of two phase piezoelectric composite materials ranging from 0-3 (particulate) to 1-3 (fiber) composites. To this aim,...master thesis 2014
- document
-
Xu, L. (author)This research focuses on the stability of three metastable ? titanium alloys – Ti-10V-1Fe-3Al (Ti-1013), Ti-10V-2Cr-3Al (Ti-102Cr3) and Ti-10V-2Fe-3Al-B (Ti-1023B). In the first stage of the work, new ?+(?+?) heat treatment schemes were designed on the basis of Thermo-Calc® simulations and previous research work and carried out to such an extent...master thesis 2015
- document
- Denissen, P.J. (author) master thesis 2015
- document
-
De Boom, K. (author)In recent years the number of applications relying on piezoelectric sensors has increased rapidly. New applications lead to new requirements concerning material properties and functionalities. In many of the (future) applications, such as artificial robotic skin, structural health monitoring and flexible keyboards, the necessity for flexibility...master thesis 2016
- document
-
Snel, J.S. (author)This thesis investigated the mechanical properties and deformation behaviour of accumulative roll-bonded (ARB) Cu/Nb metallic multilayers at nanoscale layer thicknesses and temperatures up to 400 degrees Celsius. Samples with individual layer thicknesses between 7 and 63 nm were nanomechanically tested at room-temperature by micropillar...master thesis 2016
- document
-
Tombrock, A.J.C. (author)DP600 HR is one of Tata Steels hot rolled products. It is a dual phase steel unique to Tata Steel for its two step cooling process and low coiling temperature. The finished product has encountered several surface defects, one of which are imprints. In order to find the root cause for the imprints a literature study, a factory inspection and a...master thesis 2016
- document
-
Zhao, Y. (author)Recently, X65 carbon steel pipes internally clad with a thin Inconel625 alloy lining are highly used. However, during welding the Inconel625 lining in the root pass, the weld bead is uneven. To avoid weld defects in the successive passes, an additional grinding procedure is always required to flatten the weld bead. It is known that as an...master thesis 2016
Searched for: contributor%3A%22van+der+Zwaag%2C+S.+%28mentor%29%22
(1 - 20 of 35)
Pages
- 1
- 2