Searched for: department%3A%22Electrical%255C%252BEngineering%22
(1 - 20 of 32)

Pages

document
Koch, R. (author), De Gelder, L. (author)
This thesis is part of the ”Ultra Wideband Synthetic Aperture Radar Imaging” project of the bachelor Electrical Engineering graduation program in the fourth quarter of the teaching year 2016-2017. Synthetic aperture radar (SAR) is used to make images of the environment of a car. These images are, in combination with GPS, needed to give an...
bachelor thesis 2017
document
Claveau, E. (author), Kool, B. (author), van Mierop, R. (author)
In the summer of 2016, a solar powered charging station for electric bicycles and scooters was built on the TU Delft campus next to the EEMCS building. Initially the station could only charge very few types of batteries, due to the fact that each battery manufacturer has its own different requirements for the charger. The aim of this BSc final...
bachelor thesis 2017
document
Noortman, J.C. (author), Bisschop, M.C. (author)
In this thesis a model for sound reflections designed which is to be used in an audio-based game for visually impaired people is described. This project is a part of a three-group bachelor graduation project of six peoplein total. The three groups combined create a working game for visually impaired children, meant to be used to train the user’s...
bachelor thesis 2015
document
Mulder, Y.T.B. (author), Romijn, J. (author), Verhaert, D.S.M. (author)
In this project, a USB DAC was designed. This was done according to a proposal from Flexible Optical B.V. which is located in Rijswijk. This device is used to correct for atmospheric interference in optical measurement systems. The existing DAC is ten years old and needs to be updated to requirements of today. The 'next generation' DAC has been...
bachelor thesis 2015
document
Van Dam, L. (author), Van Dijk, S.A. (author), Van der Kaay, M.S. (author)
A High-Speed Digital-to-Analog converter system is proposed that is controlled using USB 3.0. Possibilities to improve the refresh rate and resolution are researched to meet the standards of modern measurement systems. For instance, adaptive optics often uses a DAC in its feedback loop, but the USB DAC systems currently available provide...
bachelor thesis 2015
document
Cheung, T. (author), Van Leeuwen, L.T.J. (author)
Voor het Bachelor Afstudeer Project van groep I is BabyShell ontwikkeld. BabyShell is een draagbaar apparaat dat in staat is om jonge ouders en zwangere vrouwen te helpen om een voorlopige diagnose te stellen van medische problemen van hun kinderen. Ook is BabyShell in staat om temperatuur op te nemen en belangrijke data bij te houden zoals...
bachelor thesis 2015
document
Coppoolse, J.T. (author), Van Dam, W.J.L. (author)
This thesis was made for the Bachelor Graduation Project (Electrical Engineering). The purpose of the project was to design an audio-based game for visually impaired children. In this thesis the gameplay and the graph- ical user interface are designed. We choose to make a simplified dungeon crawler in the programming language Python. We designed...
bachelor thesis 2015
document
Bakker, J.P. (author), Jongeling, A.C.G. (author)
In ontwikkelingslanden zijn er nog altijd veel problemen met de gezondheid van zwangere vrouwen en jonge kinderen. Daarom is voor dit Bachelor afstudeerproject BabyShell ontwikkeld: een draagbaar apparaat dat onafhankelijk is van het stroomnet en door middel van een vraag-antwoord proces diagnoses voor medische problemen kan stellen. BabyShell...
bachelor thesis 2015
document
Audenaert, L.E.G. (author), Van Bremen, L. (author), Hulsinga, D.S. (author)
This document describes the design and modification of a Universal Jamming Gripper. On the existing idea is expanded in such a way that it can be used in a low power environment. For the gripper a capacitive sensor is proposed to measure the deformation of the flexible part. This measurement can be used to aid in centring an object in the...
bachelor thesis 2015
document
Van Eyk, E.D.C. (author), Van Leeuwen, W.J. (author)
Crawljax is a crawler, which not only finds states via regular links, but also states that are hidden by JavaScript actions. However, this leads to a gigantic number of states with many duplicates. A near-duplicate detection algorithm can be a solution to limit the number of states found by Crawljax, while crawling the most essential, unique...
bachelor thesis 2014
document
Omidi, P. (author), Lew, D.W.O. (author)
This thesis elaborates on the implementation of the FPGA board in order to drive the LED system. The goal of this project is to make every part of the design regarding the control of the electronics as customizable as possible. This project consists of 3 main parts to drive the LED system. The first part is called the “Collector”. The collector...
bachelor thesis 2014
document
De Goffau, P.L. (author), Mes, J.C. (author)
The purpose of this project is to design a control system to stabilize a platform on a buoy. Stabilization of the platform on the buoy is needed for reliable measurements of wind speed and wind direction on sea using LiDAR (Light Detection And Ranging) modules. These modules use the reflection of particles in the air to measure the wind speed...
bachelor thesis 2014
document
Baas, M.H.G. (author), Pannekoek, A. (author)
It is estimated that in the EU, energy consumption will rise to 4,350 TWh in 2030. Offshore wind farms can provide a solution. The technical wind energy potential for offshore wind farms of the European waters is estimated to be 30,000 TWh annually. For feasibility studies, building and operating offshore wind farms weather assessments are...
bachelor thesis 2014
document
Loopik, L.A. (author), Verhage, A.A. (author)
Op dit moment is er in de roeisport geen goedkope oplossing om het individuele vermogen van roeiers in de boot te meten en daarover nuttige informatie aan de roeiers te verstrekken. In deze scriptie is uitgezocht op wat voor manieren dit wel mogelijk zou zijn. Er worden meetsystemen op de roeiriem, op de dol en op de dolpen besproken om de...
bachelor thesis 2014
document
Barak, R.K. (author), Van Der Cammen, M. (author), Zhang, H.M. (author)
This thesis proposes an algorithm to solve the issue of indoor localization using a source, reference receiver and mobile receiver placed in a convex room. The goal is determination of the position of the mobile receiver. The proposed algorithm consists of two localization techniques known from scientific literature: Time Difference of Arrival...
bachelor thesis 2013
document
Getreuer, R. (author), Baker, R. (author)
Performance measuring rowing.
bachelor thesis 2013
document
Van Roemburg, S. (author), Folkers, C. (author)
In de roeisport bestaat een grote behoefte aan het meten van prestaties in de roeiboot. Op dit moment is het enkel mogelijk de prestatie van de roeier op een roeimachine of met dure gespecialiseerde apparatuur in de roeiboot te meten. De eerste optie biedt geen representatieve cijfers voor de uiteindelijke prestatie in de boot en de tweede optie...
bachelor thesis 2013
document
Burger, R.B. (author), Jansen, M.P. (author)
Formula Zero Delft is een raceteam dat sinds 2007 racevoertuigen met een fuel cell bouwt. In dat jaar nam de stichting deel aan de eerste competitie voor waterstof karts. In de twee jaar hierna heeft het team nog twee karts gebouwd waarna de overstap naar Formula Student auto's is gemaakt. Na twee jaar in de Formula Studentcompetitie gaat het...
bachelor thesis 2012
document
Homulle, H.A.R. (author), Zimmerling, J.T. (author)
An embedded electronic camera system for unmanned aerial vehicles (UAV) was developed in the scope of the final bachelor project at the TU Delft in 2012. The aim of the project was to develop a prototype for a new UAV competition. The electronic system of the prototype had to able to track an object, make a picture of it and send it to a ground...
bachelor thesis 2012
document
Van der Spek, I.T. (author), Voorsluys, M.H. (author)
In this thesis first a study is conducted on which position determination method should be used in a UAV and especially in the Parrot AR.Drone. Then an autonomous control for the AR.Drone is designed. The best position determination method in this case appeared to be a combination of a GPS sensor and a barometer. The autonomous control is...
bachelor thesis 2012
Searched for: department%3A%22Electrical%255C%252BEngineering%22
(1 - 20 of 32)

Pages