Searched for: department%3A%22Electrical%255C%252BSustainable%255C%252BEnergy%22
(41 - 60 of 319)

Pages

document
Shekhar, A. (author), Rituraj, G. (author), van der Sande, Robin (author), Ahmadi, M. (author), Deshmukh, R.S. (author), Bauer, P. (author), Nougain, V. (author), Lekić, A. (author), Palensky, P. (author)
Reliable Power Electronic Systems (PES) are vital for enabling energy transition technologies of the future. Power hardware-in-the-Loop (PHIL) test bed can be used to validate such systems cost-effectively and time-efficiently. In general, the Real Time Digital Twin (RTDT) is a virtual representation of the PES and its operating environment that...
conference paper 2023
document
Verbist, Flore (author), Panda, Nanda Kishor (author), Vergara Barrios, P.P. (author), Palensky, P. (author)
With a growing share of electric vehicles (EVs) in our distribution grids, the need for smart charging becomes indispensable to minimise grid reinforcement. To circumvent the associated capacity limitations, this paper evaluates the effectiveness of different levels of network constraints and different dynamic tariffs, including a dynamic...
conference paper 2023
document
Giannakopoulos, G. (author), Perilla Guerra, A.D. (author), Rueda, José L. (author), Palensky, P. (author), Gonzalez-Longatt, Francisco (author)
Modernization of power systems leads to more power electronic interfaced units in the generation, demand, and transmission. Examples are remotely installed renewable energy sources, loads with constant power, or high voltage direct current (HVDC) corridors. These changes significantly affect the frequency stability margins of the system and...
book chapter 2023
document
Chaudhary, A. (author), Hos, Jan (author), Lossen, Jan (author), Huster, Frank (author), Kopecek, Radovan (author), van Swaaij, R.A.C.M.M. (author), Zeman, M. (author)
In this article, we investigate the passivation quality and electrical contact properties for samples with a 150 nm thick n+ polysilicon layer in comparison to samples with a phosphorus diffused layer. High level of passivation is achieved for the samples with n+ polysilicon layer and an interfacial oxide underneath it. The contact properties...
journal article 2022
document
Ferri, Carlotta (author), Ziar, H. (author), Nguyen, T.T. (author), van Lint, J.W.C. (author), Zeman, M. (author), Isabella, O. (author)
After developing the methodology, we applied it to the case of the Netherlands highways. We show that the average irradiation on the Dutch highway network is around 880 kWh/m2/y, 35% less than the potential of an optimally tilted conventional PV system in the south of the Netherlands. Covering the entire 1600 km of the Dutch highways network...
journal article 2022
document
Yang, G. (author), Han, C. (author), Procel Moya, P.A. (author), Zhao, Y. (author), Singh, M. (author), Mazzarella, L. (author), Zeman, M. (author), Isabella, O. (author)
Crystalline silicon solar cells with passivating contacts based on doped poly-Si exhibit high optical parasitic losses. Aiming at minimizing these losses, we developed the oxygen-alloyed poly-Si (poly-SiOx) as suitable material for passivating contacts. From passivation point of view, poly-SiOx layers show excellent passivation quality and...
journal article 2022
document
Xu, J. (author), Soeiro, Thiago B. (author), Wu, Y. (author), Gao, Fei (author), Wang, Y. (author), Tang, Houjun (author), Bauer, P. (author)
A three-phase buck-type rectifier features a step-down ac-dc conversion function, which is considered as a prominent solution for electric vehicle chargers and telecommunication systems integrated to the grid above 380 V line to line. However, traditional solutions for those applications employ cascaded architectures with an ac-dc boost-type...
journal article 2022
document
Gonzalez-Longatt, Francisco (author), Rueda, José L. (author), Palensky, P. (author), Chamorro, Harold R. (author), Abdellah, Kouzou (author)
Inverter-based generation (IBG) is critical in achieving a dependable and resilient electrical system while meeting the net-zero emission goal. The enormous integration of IBG tends to produce various issues, including reduced rotational inertia and reduced short circuit levels. Several scientific publications agree that the voltage source...
conference paper 2022
document
Calcabrini, A. (author), Cardose, Ruben (author), Gribnau, David (author), Babal, Pavel (author), Manganiello, P. (author), Zeman, M. (author), Isabella, O. (author)
The accurate computation of the irradiance incident on the surface of photovoltaic modules is crucial for the simulation of the energy yield of a photovoltaic system. Depending on the geometrical complexity of the surroundings, different approaches are commonly employed to calculate the irradiance on the photovoltaic system. In this article,...
journal article 2022
document
Martinez Lopez, V.A. (author), Žindžiūtė, U. (author), Ziar, H. (author), Zeman, M. (author), Isabella, O. (author)
Irradiance variability is one of the main challenges for using photovoltaic energy. This variability affects the operation of maximum power point trackers (MPPT) causing energy losses. The logic of the Perturb-and-Observe MPPT algorithm is particularly sensitive to quick irradiance changes. We quantified the existing relation between irradiance...
journal article 2022
document
Santbergen, R. (author), Vogt, M.R. (author), Mishima, Ryota (author), Hino, Masashi (author), Uzu, Hisashi (author), Adachi, Daisuke (author), Yamamoto, Kenji (author), Zeman, M. (author), Isabella, O. (author)
We investigate gentle front side textures for perovskite/silicon tandem solar cells. These textures enhance the absorption of sunlight, yet are sufficiently gentle to allow deposition of an efficient perovskite top cell. We present a tandem solar cell with such gentle texture, fabricated by Kaneka corporation, with an efficiency as high as 28...
journal article 2022
document
Han, C. (author), Santbergen, R. (author), van Duffelen, Max (author), Procel Moya, P.A. (author), Zhao, Y. (author), Yang, G. (author), Zhang, Xiaodan (author), Zeman, M. (author), Mazzarella, L. (author), Isabella, O. (author)
Reducing indium consumption, which is related to the transparent conductive oxide (TCO) use, is a key challenge for scaling up silicon heterojunction (SHJ) solar cell technology to terawatt level. In this work, we developed bifacial SHJ solar cells with reduced TCO thickness. We present three types of In<sub>2</sub>O<sub>3</sub>-based TCOs,...
journal article 2022
document
Kadlečíková, Magdaléna (author), Vančo, Ľubomír (author), Breza, Juraj (author), Mikolášek, Miroslav (author), Hušeková, Kristína (author), Fröhlich, Karol (author), Procel Moya, P.A. (author), Zeman, M. (author), Isabella, O. (author)
We compared the morphology and Raman response of nanoscale shaped surfaces of Si substrates versus monocrystalline Si. Samples were structured by reactive ion etching, and four of them were covered by a RuO<sub>2</sub>-IrO<sub>2</sub> layer. Raman bands, centred at approx. 520 cm<sup>–1</sup>, belonging to samples processed by etching the Si...
journal article 2022
document
van Nijen, D.A. (author), Manganiello, P. (author), Zeman, M. (author), Isabella, O. (author)
Power electronics traditionally plays a crucial role in conditioning the power of photovoltaic (PV) modules and connecting the systems to the electricity grid. Recently, PV module designs with more sub-module power electronics are gaining increased attention. These designs can offer higher reliability and improved resilience against non...
review 2022
document
Vogt, M.R. (author), Ruiz Tobon, C.M. (author), Alcañiz Moya, A. (author), Procel Moya, P.A. (author), Blom, Y. (author), Nour El Din, A. (author), Stark, T. (author), Wang, Z. (author), Goma, E. Garcia (author), Etxebarria, J. G. (author), Ziar, H. (author), Zeman, M. (author), Santbergen, R. (author), Isabella, O. (author)
We introduce a novel simulation tool capable of calculating the energy yield of a PV system based on its fundamental material properties and using self-consistent models. Thus, our simulation model can operate without measurements of a PV device. It combines wave and ray optics and a dedicated semiconductor simulation to model the...
journal article 2022
document
Cao, L. (author), Procel Moya, P.A. (author), Alcañiz Moya, A. (author), Yan, J. (author), Tichelaar, F.D. (author), Özkol, E. (author), Zhao, Y. (author), Han, C. (author), Yang, G. (author), Yao, Z. (author), Zeman, M. (author), Santbergen, R. (author), Mazzarella, L. (author), Isabella, O. (author)
Thin films of transition metal oxides such as molybdenum oxide (MoO<sub>x</sub>) are attractive for application in silicon heterojunction solar cells for their potential to yield large short-circuit current density. However, full control of electrical properties of thin MoO<sub>x</sub> layers must be mastered to obtain an efficient hole...
journal article 2022
document
Chen, N. (author), Rudolph, Dominik (author), Peter, Christoph (author), Zeman, M. (author), Isabella, O. (author), Rosen, Yitzchak (author), Grouchko, Michael (author), Shochet, Ofer (author), Mihailetchi, Valentin D. (author)
The high usage of silver in industrial solar cells may limit the growth of the solar industry. One solution is to replace Ag with copper. A screen printable Cu paste is used herein to metallize industrial interdigitated back contact (IBC) solar cells. A novel metallization structure is proposed for making solar cells. Cu paste is applied to...
journal article 2022
document
Aonuki, S. (author), Yamashita, Yudai (author), Limodio, G. (author), Narita, Shunsuke (author), Takayanagi, Kaori (author), Iwai, Ai (author), Toko, Kaoru (author), Zeman, M. (author), Isabella, O. (author), Suemasu, Takashi (author)
We formed phosphorous(P)-ion-implanted n-BaSi<sub>2</sub> films on p-Si(111) substrates and demonstrated solar-cell functionality of the n-BaSi<sub>2</sub>/p-Si heterojunction under AM1.5 illumination. The BaSi<sub>2</sub> films were grown by molecular beam epitaxy, followed by implantation of P ions to the BaSi<sub>2</sub> films using PF<sub...
journal article 2022
document
Scire, D. (author), Procel Moya, P.A. (author), Gulino, Antonino (author), Isabella, O. (author), Zeman, M. (author), Crupi, Isodiana (author)
Ref. [56] was unfortunately wrong, Instead of [56] Corless, R. M.; Gonnet, G. H.; Hare, D. E. G.; Jeffrey, D. J.; Knuth, D. E. On the Lambert W function. Adv. Comput. Math. 1996, 5, 329–359. It should be changed to Biswas, R. K.; Khan, P.; Mukherjee, S.; Mukhopadhyay, A. K.; Ghosh, J.; Muraleedharan, K. Study of short range structure of...
journal article 2022
document
Zhao, Y. (author), Procel Moya, P.A. (author), Smets, A.H.M. (author), Mazzarella, L. (author), Han, C. (author), Yang, G. (author), Cao, L. (author), Yao, Z. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Excellent surface passivation induced by (i)a-Si:H is critical to achieve high-efficiency silicon heterojunction (SHJ) solar cells. This is key for conventional single-junction cell applications but also for bottom cell application in tandem devices. In this study, we investigated the effects of (i)a-Si:H deposition temperature on passivation...
journal article 2022
Searched for: department%3A%22Electrical%255C%252BSustainable%255C%252BEnergy%22
(41 - 60 of 319)

Pages