Searched for: department:"Materials%5C+Science%5C+and%5C+Engineering"
(1 - 20 of 158)

Pages

document
Wu, J. (author), Petrov, R.H. (author), Kölling, S. (author), Godet, S (author), Sietsma, J. (author)
Micro- to nano-scale characterization of the microstructures in the white etching layer (WEL), observed in a Dutch R260 Mn grade rail steel, was performed via various techniques. Retained austenite in the WEL was identified via electron backscatter diffraction (EBSD), automatic crystallographic orientation mapping in transmission electron...
journal article 2018
document
Navarro Lopez, A. (author), Hidalgo Garcia, J. (author), Sietsma, J. (author), Santofimia Navarro, M.J. (author)
The accelerated formation of bainite in presence of martensite is opening a new processing window for the steel industry. However, for a feasible industrial implementation, it is necessary to determine the mechanical behaviour of the steels developed under such conditions. This study focuses on analysing the effects of the formation of...
journal article 2018
document
Gavel, D.J. (author), Song, Qingshi (author), Adema, A.T. (author), van der Stel, Jan (author), Sietsma, J. (author), Boom, R. (author), Yang, Y. (author)
In the blast furnace, nut coke is utilized in a mixture with the ferrous burden to improve the gas permeability. Although applied in a broad range (10–40 mm, 2–23 wt-%), limited information is available on changed burden behaviour in its presence. In the present study, the detailed characterization was performed on the iron ore pellets quenched...
journal article 2018
document
Chen, Z. (author), Qu, Yingxia (author), Zeilstra, Christiaan (author), van der Stel, Jan (author), Sietsma, J. (author), Yang, Y. (author)
Melting and reduction of fine iron ore particles in the gas environment of a HIsarna smelting cyclone is a critically important topic, but very limited information is currently available except for some experimental data from high temperature drop tube furnace (HTDF). This work discusses the equilibrium state of reacting iron ore in the HTDF...
journal article 2018
document
Laird, Jamie S. (author), Hughes, Anthony E. (author), Ryan, C.J. (author), Visser, P (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Lithium based inhibitors in aerospace coatings are seen as excellent replacements for their chromium counterparts which are both carcinogenic and heavier. However, Li is generally difficult to detect and following changes in its distribution due to corrosion is impossible with many standard techniques. Combining MeV Particle Induced Gamma and...
journal article 2017
document
Eftekharimilani, P. (author), van der Aa, EM (author), Hermans, M.J.M. (author), Richardson, I.M. (author)
This paper presents the effects of double pulse resistance spot welding (RSW) on the microstructural evolution, elemental distribution and mechanical properties of a 3rd generation 1 GPa advanced high strength steel (AHSS). In order to investigate the effect of double pulsing, the steel was exposed to single and various double pulse RSW...
journal article 2017
document
Sloof, W.G. (author), Pei, R. (author), McDonald, S.A. (author), Fife, J.L. (author), Shen, L. (author), Boatemaa, L. (author), Farle, A.S. (author), Yan, K. (author), Zhang, X. (author), Van der Zwaag, S. (author), Lee, P.D. (author), Withers, P.J. (author)
MAX phase materials are emerging as attractive engineering materials in applications where the material is exposed to severe thermal and mechanical conditions in an oxidative environment. The Ti2AlC MAX phase possesses attractive thermomechanical properties even beyond a temperature of 1000 K. An attractive feature of this material is its...
journal article 2016
document
Goulas, C. (author), Mecozzi, M.G. (author), Sietsma, J. (author)
In this paper, the effect of chemical inhomogeneity on the isothermal bainite formation is investigated in medium-carbon low-silicon spring steel by dilatometry and microscopy. The analysis of the microstructure at different times during transformation shows that chemical segregation of substitutional alloying elements resulting from casting...
journal article 2016
document
Bojack, A. (author), Zhao, L. (author), Morris, P.F. (author), Sietsma, J. (author)
The influence of austenitization treatment of a 13Cr6Ni2Mo supermartensitic stainless steel (X2CrNiMoV13-5-2) on austenite formation during reheating and on the fraction of austenite retained after tempering treatment is measured and analyzed. The results show the formation of austenite in two stages. This is probably due to inhomogeneous...
journal article 2016
document
Ravi, A.M. (author), Sietsma, J. (author), Santofimia, M.J. (author)
Bainite formation in steels begins with nucleation of bainitic ferrite at austenite grain boundaries (?/? interfaces). This leads to creation of bainitic ferrite/austenite interfaces (?/? interfaces). Bainite formation continues through autocatalysis with nucleation of bainitic ferrite at these newly created ?/? interfaces. The displacive theory...
journal article 2016
document
Sun, F. (author)
The ultimate objective of this work is to gain a better understanding of the plastic behavior of rough metal surfaces under contact loading. Attention in this thesis focuses on the study of single and multiple asperities with micrometer scale dimensions, a scale at which plasticity is known to be size dependent. The asperities have very simple...
doctoral thesis 2016
document
Pirgazi, H. (author), Kestens, L.A.I. (author)
Manual serial sectioning which includes consecutive steps of sample preparation and Electron Back Scattering Diffraction (EBSD) measurement was employed to extract the twodimensional (2D) sections of a pure nickel sample and to reconstruct the three-dimensional (3D) microstructure. A general alignment algorithm based on the minimization of...
conference paper 2015
document
Gomes, E. (author), Kestens, L.A.I. (author)
Two new methods, one for determining the experimentally observed Orientation Relationship (OR) and another for reconstructing prior austenite phase, are proposed. Both methods are based on the angular deviation of the OR at the grain boundaries. The first algorithm identifies the optimum OR using the misorientation distribution of the entire...
conference paper 2015
document
Nguyen-MInh, T. (author), Sidor, J.J. (author), Petrov, R.H. (author), Kestens, L.A.I. (author)
Due to progressive deformation, the dislocation densities in crystals are accumulated and the resistance of grains to further deformation increases. Homogeneous deformation becomes energetically less favorable, which may result for some orientations in strain localization. In-grain shear banding, a typical kind of localized deformation in metals...
conference paper 2015
document
Pirgazi, H. (author), Glowinski, K. (author), Morawiec, A. (author), Kestens, L.A.I. (author)
Five macroscopic boundary parameters can be extracted from three-dimensional orientation maps. Serial sectioning, which includes consecutive steps of material removal, and electron backscatter diffraction (EBSD) measurement were employed to extract a stack of two-dimensional sections of a pure nickel sample. The EBSD patterns were collected from...
journal article 2015
document
Ghodrat, S. (author), Pirgazi, H. (author), Kestens, L.A.I. (author)
To the purpose of evaluating the effect of deformation on the microstructure, aluminum structures were analyzed on tensile strained samples extended to 25% elongation. In the substructure of these deformed samples linear slip patterns were observed, generally confined to the bulk of the grain. In order to study the crystallographic aspect of...
conference paper 2015
document
Lapeire, L. (author), Sidor, J. (author), Martinez Lombardia, E. (author), Verbeken, K. (author), De Graeve, I. (author), Terryn, H.A. (author), Kestens, L.A.I. (author)
Nowadays, there is a considerable scientific interest in bulk ultrafine grained materials, due to their potential for superior mechanical properties. One of the possible formation methods of nano-grained materials is cryogenic rolling. The influence of rolling at cryogenic temperatures has been investigated. Significant differences in the...
conference paper 2015
document
Navarro-Lopez, A. (author), Sietsma, J. (author), Santofimia, M.J. (author)
Thermomechanical processing of Advanced Multiphase High Strength Steels often includes isothermal treatments around the martensite start temperature (M s). It has been reported that the presence of martensite formed prior to these isothermal treatments accelerates the kinetics of the subsequent transformation. This kinetic effect is commonly...
journal article 2015
document
Liu, Y. (author), Visser, P. (author), Zhou, X. (author), Lyon, S.B. (author), Hashimoto, T. (author), Curioni, M. (author), Gholinia, A. (author), Thompson, G.E. (author), Smyth, G. (author), Gibbon, S.R. (author), Graham, D. (author), Mol, J.M.C. (author), Terryn, H.A. (author)
An investigation into corrosion inhibition properties of a primer coating containing lithium carbonate as corrosion inhibitive pigment for AA2024 aluminum alloy was conducted. It was found that, during neutral salt spray exposure, a protective film of about 0.2 to 1.5 ?m thickness formed within the area where an artificial defect was introduced...
journal article 2015
document
Van Driel, B.A. (author), Kooyman, P.J. (author), van den Berg, K.J. (author), Schmidt-Ott, A. (author), Dik, J. (author)
Titanium dioxide is the most abundantly used white pigment of the 20th century. The pigment is still in use, both in the production of contemporary art and for the conservation of older artwork as a retouching pigment. Unfortunately, next to its positive characteristics, the pigment has one major potential drawback: its photocatalytic activity...
journal article 2015
Searched for: department:"Materials%5C+Science%5C+and%5C+Engineering"
(1 - 20 of 158)

Pages