Complex impedance and equivalent bolometer, analysis of a low noise bolometer for SAFARI

Transition-edge-sensor (TES) bolometers are the chosen detector technology for the SAFARI Imaging Spectrometer on the SPICA telescope. For this mission, SRON is developing bolometers, each consisting of a TiAu TES that is weakly coupled to the thermal bath through thin legs of silicon nitride. In order to understand and optimize the bolometer...

AC bias characterization of low noise bolometers for SAFARI using an open-loop frequency domain SQUID-based multiplexer operating between 1 and 5 MHz

SRON is developing the Frequency Domain Multiplexing (FDM) read-out and the ultra low NEP TES bolometers array for the infra-red spectrometer SAFARI on board of the Japanese space mission SPICA. The FDM prototype of the instrument requires critical and complex optimizations. For single pixel characterization under AC bias we are developing a...

Distributed TES model for designing low noise bolometers approaching SAFARI instrument requirements

Transition edge sensors (TES) are the chosen detector technology for the SAFARI imaging spectrometer on the SPICA telescope. The TES are required to have an NEP of 2–3 × 10?19 W/? Hz to take full advantage of the cooled mirror. SRON has developed TiAu TES bolometers for the short wavelength band (30–60 ?m). The TES are on SiN membranes, in which...

Low-noise transition edge sensor (TES) for SAFARI instrument on SPICA

Development of transition edge superconducting bolometers for the SAFARI Far-Infrared spectrometer on the SPICA space-borne telescope

We describe the optimization of transition edge superconducting (TES) detectors for use in a far-infrared (FIR) Fourier transform spectrometer (FTS) mounted on a cryogenically cooled space-borne telescope (e.g. SPICA). The required noise equivalent power (NEP) of the detectors is approximately 10?19 W/ ?Hz in order to be lower than the photon...