- document
-
Fajkovic, E. (author)Rotterdam is preparing a bid to host the World Expo in 2025, which should support the move towards a new sustainable reality. The World Expo is expected to host over a hundred country pavilions, for 50 million visitors for a period of 6 months. World Expo Rotterdam 2025 supports the right towards a new sustainable reality, which comprises...master thesis 2016
- document
-
Vlaun, N.J.V. (author)Over the last two decades, there has been an increase in Europe in modern non-territorial offices with large open work environments. Past research has shown that a large number of workers in these offices suffer from lack of privacy and from noise. Noise is identified as a root cause of these problems and often poses the most severe indoor...master thesis 2015
- document
-
Mostart, Guus (author)The aim of this architectural assignment is to design a building that reconnects – both on a physical as well as on a social level – the port of Merwe-Vierhavens and the project location to its direct surrounding and to the city of Rotterdam. The goal is not only to inject a variety of program and functions – those of which are lacking – into...master thesis 2015
- document
- Jooshesh, M. (author) master thesis 2015
- document
-
Turrin, M. (author), Sariyildiz, I.S. (author), Paul, J.C. (author)Focusing on large span structures for sport buildings, the paper tackles the role of parametric modelling and performance simulations, to enhance the integration between architectural and engineering design. The general approach contrasts post-engineering processes. In post-engineering, technical performances are considered in late stages of...conference paper 2015
- document
-
Hassan, Y. (author)Op welke wijze heeft de CAD techniek zich door de jaren heen ontwikkeld en wat is zijn weerslag op het architectonisch product? Met deze vraag word er geprobeerd om meer duidelijkheid te krijgen over de invloed van CAD technieken in de architectuur. De ontwikkeling van CAD begint in 1963 en is vandaag de dag nog in volle gang. Er word daarbij...master thesis 2014
- document
-
Smidt, D.M. (author)This research is twofold. Firstly it treats the complexity of design using a computational intelligent method to achieve, with regard to a limited set of goals, high performing designs. Secondly, an architectural and structural challenge to conceptually design a freeform roof framework, which integrates structural rigidity and non-standard...master thesis 2014
- document
-
Vrouwe, I. (author), Van Swieten, P.M.J. (author)This paper aims at the discussion of opportunities and challenges of using specific construction sub-problems as active parameters in the physical construction of digital parametric design models. To create an overview, a taxonomy of sub-problems for construction is introduced. By using prototypes as a physical interface for the digital model,...conference paper 2013
- document
-
Mostafavi, S. (author), Morales Beltran, M.G. (author), Biloria, N.M. (author)This paper presents a performance driven computational design methodology through introducing a case on parametric structural design. The paper describes the process of design technology development and frames a design methodology through which engineering, -in this case structural- aspects of architectural design could become more...conference paper 2013
- document
-
Momin, A.A. (author)Identification and application of suitable computational methods to effectively handle complexity issues in architectural design process. The associated research questions are: - How can perceptual demands for an exhibition be satisfied using parametric - pattern based approach? - How can such experential demands be addressed together with other...master thesis 2013
- document
-
Turrin, M. (author), Stouffs, R.M.F. (author), Sariyildiz, I.S. (author)In this paper, alternative approaches to structure the parametric geometry in relation to information on various performances are described and exemplified. They relate to different levels of knowledge that concern the performances considered in the process and which are available to the designer while the parametric model is being set....conference paper 2013
- document
-
Hubers, J.C. (author)Sustainable architecture is complex. Many aspects, differently important to many stakeholders, are to be optimized. BIM should be used for this. Building Information Modellingis a collaborative process where all stakeholders integrate and optimize their information in a digital 3D model. Sometimes it is called Green BIM. But what exactly is that...journal article 2012
- document
-
Biloria, N.M. (author)Architectural praxis is in continuous state of change. The introduction of information technology driven design techniques, constantly updating building information modeling protocols, new policy demands coupled together with environmental regulations and cultural fluctuations are all open-ended dynamic phenomena within which contemporary...journal article 2011
- document
-
Van Embden Andres, M.V. (author), Turrin, M. (author), Von Buelow, P. (author)The approach demonstrated in this paper uses Evolutionary Computation (EC) to enhance and modify structural form based on biological micro structures.The forms are modified to conform to new boundary conditions associated with architectural structures.The process is based on a Genetic Algorithm (GA) which visually exposes for the designer a...journal article 2011
- document
-
Chatxikonstantinou, I. (author)It is without doubt that airport terminals are some of the most com- plex building types in existence. Their scale, the nature of their func- tions, the strict security measures as well as the function-specific components and building equipment that is present in such build- ings are all factors that increase their level of complexity as a build...master thesis 2011
- document
-
Van de Straat, R.J. (author)The distinction whether a geometric description is complex or not is particularly important from an analysis and construction technology viewpoint in relation with the digital means of modelling this geometry. As complex geometry possibly leads to insurmountable problems or disproportionate high costs, realising a design may be reliant on...master thesis 2011
- document
-
Nascimento, G. (author)A design for an intermodal transfer station for the City of Almere: studies in computationally advanced design techniques, digital fabrication methods, form-finding techniques, material systems, mass-customization, morphogenetic design strategies, parametric-associative designmaster thesis 2011
- document
-
Schreurs, P.H.M. (author)The 'Commuter Retreat' project was developed in the context of the Border Conditions graduation studio. This studio emphasizes on an experimental approach to architecture, based on the development of specific techniques of representation to describe specific urban and architectural phenomena. The first part of the studio focuses on the urban...master thesis 2009
- document
-
Hubers, J.C. (author)In this PhD research a method and software prototype is developed for COLlaborative Architectural Design In VIRtual reality. The method consists of developing versions of a concept for a building and the evaluation of them with criteria. Every team member makes his own versions; otherwise they would destroy each others work. They can evaluate...doctoral thesis 2008
- document
- Hubers, H. (author) conference paper 2005