Searched for: golfbreker%2A+OR+breakwater%2A+OR+havendam%2A
(1 - 9 of 9)
document
Simonse, Jesse (author)
Since 1990, the Dutch coastline is maintained within the ‘Dynamic Preservation’ program, according to which the coastline is maintained seawards from a reference line, mainly by applying nourishments. Research into the maintenance of the Dutch coast is continuous and causes the content of the coastline preservation program to change constantly...
master thesis 2017
document
Mulders, P.H.M. (author), Verhagen, H.J. (author)
A new series of physical model tests were conducted to analyse the behaviour of a breakwater core when it becomes exposed to wave attack. The emphasis of this research was on the measured influence of a wide stone grading on both the deformation of a breakwater trunk and the occurring longshore transport. This behaviour was investigated for both...
conference paper 2012
document
Mulders, P.H.M. (author)
During the construction of breakwaters contractors often encounter undesired reshaping of exposed core material. This reshaping is comparable to the deformation process of berm breakwaters in which the outer profile reshapes into a more stable s-curve. In the case of oblique waves this deformation is enhanced by a longshore transport of stones...
master thesis 2010
document
Croonen, K. (author), Froeling, D. (author), Marbus, G. (author), Van Bemmel, M. (author)
Master project report. The Port of Altamira is one of the fast growing ports in the world and is together with Veracruz and Coatzacoalcos one of the biggest ports of Mexico at the Gulf coast. It is an industrial Port with a lot of potential for expanding. However, the breakwaters of the Port extending into the sea caused severe erosion at the...
student report 2006
document
Alikhani, A. (author), Tomasicchio, G.R. (author), Juhl, J. (author)
Comprehensive three-dimensional model tests with a berm breakwater roundhead and the adjacent trunk section were carried out at the Danish Hydraulic Institute (DHI) and at the Hydraulic & Coastal Engineering Laboratory of Aalborg University (AAU). This paper describes the influence of wave obliquity on the profile shape, on the initiation of...
report 1997
document
Dekker, R. (author)
This master's thesis is written using data from experiments performed in the framework of the Human Capital and Mobility program of the European Union. Six universities work together to solve some of the unknown aspects related to the use of submerged breakwaters along sandy coasts. In this study data from 2DV tests carried out in Delft and...
master thesis 1996
document
Jensen, M.S. (author), Frigaard, P. (author)
The report summaries the results obtained with a berm breakwater attacked by oblique waves. In the tests special attention is given to the influence of the rock shape on the longshore transport. Moreover, the reshaping berm profile and amount of wave overtopping is examined. The tests were performed in a tree-dimensional model in Jan.-Feb. 96'...
report 1996
document
Hald, T. (author), Burcharth, H.F. (author), Frigaard, P. (author)
As a part of the MAST II Berm Breakwater Structures, existing data from conducted laboratory tests have been reanalised. The objective was to evaluate the effect of the longshore transpsort on both the roundhead and trunk, the ht.u,er exposed to both head-on waves and oblique inegular waves varying from 15 to 30 degrees angle of incidence. 3...
report 1995
document
Bakker, W.T. (author)
A mathematical description of sand waves along a coast and the effect of blocking structures on this coast, like groynes and breakwaters.
report 1967
Searched for: golfbreker%2A+OR+breakwater%2A+OR+havendam%2A
(1 - 9 of 9)