Searched for: mods_note_programme_s%3A%22Aerodynamics%22
(1 - 20 of 24)

Pages

document
Brust, S.G. (author)
The importance of reliable and efficient launch vehicles pervades the many industries which rely on space based hardware. An experimental investigation has been performed into the effects of nozzle length and exhaust plume presence on a FESTIP axisymmetric base flow at Mach 0.7. Three different nozzle lengths (L/D = 0.6, 1.2, 1.8) were tested to...
master thesis 2017
document
Moreira Ribeiro, A.S. (author)
Passive vortex generators (VGs) are small plate-devices that are placed on the top of wings, in an array configuration, in order to delay or event prevent stall. Due to their small size, when compared to the wing, a highly refined mesh is required to accurately simulate the flow behaviour downstream the VG location. As a consequence, the...
master thesis 2017
document
Vonck, F.W.J. (author)
master thesis 2016
document
Peeters, P.T. (author)
Pipelines with multiphase flow of gas, oil, and water are commonly used in the oil and gas industry. In the presence of offshore platforms or vessels, the pipeline ends with a vertical riser. A possible new concept is to use a single large diameter pipeline along the sea floor that ends into multiple smaller diameter risers. This concept might...
master thesis 2016
document
Hebbare, R.R. (author)
master thesis 2016
document
Morias, K. (author)
This thesis follows a previous study on the aerodynamic characterization of helium-filled soap bubbles (HFSBs) for large-scale PIV measurements and aims at characterizing statistically the tracing fidelity of HFSBs in PIV experiments, considering the statistical distribution of the bubbles diameter, slip velocity, relaxation time and density....
master thesis 2016
document
Kessels, P.C.J. (author)
The Reynolds-averaged Navier-Stokes equations are numerically solved in a segregated manner, along with the Spalart-Allmaras turbulence model. The Galerkin as well as multiple stabilized finite element formulations are derived for the Spalart-Allmaras turbulence model, and tested for robustness. For a turbulent channel flow and a backward facing...
master thesis 2016
document
Kumar, A. (author)
Detailed investigation of factors that influence Wind-Tunnel modeling in vehicle thermal simulation. Tasks involved observing and investigating the additional equipment attached to the wind tunnel model that could alter the results when compared with the computational simulation results. All the study is based on computational simulation finally...
master thesis 2016
document
Van den Broecke, J. (author)
In this work a study was performed on the electrical, fluid-mechanical and net efficiency of nanosecond-pulsed dielectric barrier discharge (ns-DBD) plasma actuators. The plasma actuator efficiency was tested for dielectric barriers with a thickness between 0.5 and 1.5mm and made out of four different materials: Kapton, Lexan, PTFE and silicone...
master thesis 2016
document
Zhang, Y. (author)
Based on the recently developed mimetic spectral element method, we propose an effective numerical scheme for solving three-dimensional periodic incompressible Euler flows, which spatially preserves mass, kinetic energy and helicity. Preserving multiple integral invariants numerically will significantly contribute to the stability and accuracy...
master thesis 2016
document
Gheyssens, T. (author)
Due to the awareness of climate change, more sustainable and efficient ways of transport are needed. The most polluting road transport mode in the European Union are the long-haul tractor-trailer combinations. This study will investigate the aerodynamic characteristics of three vehicles in a platoon subjected to cross wind conditions. The effect...
master thesis 2016
document
Zhang, X. (author)
Air traffic noise, especially during the aircraft take-off and landing, has been universally acknowledged as a nuisance, for which reason, the International Civil Aviation Organization(ICAO) has ratified articles and established specifications aiming at the attenuation of air traffic noise, such as the Annex 16. The implementation of large...
master thesis 2016
document
Hofkens, A. (author)
In order to extract the body force field that is generated by a plasma actuator from velocity data, most researchers disregard the influence of the pressure gradient to obtain a spatial and temporal description of the body force field. There is however some discussion whether this assumption is valid or not. The current research tries to compute...
master thesis 2016
document
Sitter, M. (author)
Fluidic oscillators are devices that generate a temporally oscillating jet when supplied with a fluid under pressure. In recent investigations fluidic oscillators have proven to be very efficient in active flow control applications, while only little is known about the internal working mechanism of these devices. This thesis presents the...
master thesis 2015
document
Shah, J. (author)
Aircraft noise has come under severe scrutiny due to growing number of airports and airline operations. The noise generated by high lift devices is now comparable to the turbofan engines due to increasing bypass ratios. A Gurney flap is a suitable starting point to study trailing edge flap aeroacoustics due to additional lift characteristics and...
master thesis 2015
document
Ter Hofstede, E. (author)
Flow-induced vibration (FIV) plays an important role in the nuclear industry. In nuclear power plants (NPP), the FIV may cause fatigue problems, stress corrosion cracking, possible failure modes and fretting wear. This in return can lead to nuclear safety issues and substantial stand-still costs due to unplanned outages. It is therefore...
master thesis 2015
document
Dhert, T. (author)
Recent improvements in accuracy and effciency of numerical simulation techniques in the field of engineering have led to an increasing interest in applying high-fidelity models for wind turbine design. Computational Fluid Dynamics (CFD) based on Reynolds-Averaged Navier-Stokes (RANS) equations in a co-rotating reference frame has shown promising...
master thesis 2015
document
Cheung, T.M. (author)
With a growing demand for cheap access to space and high-speed flight, hypersonic research is experiencing an unceasing interest from worldwide parties. The vehicles designed for this purpose experience flight conditions where real gas effects caused by dissociation and ionization of the air molecules greatly influence the flow conditions and...
master thesis 2015
document
Van Dam, E.M. (author)
This thesis experimentally assesses the inflow towards the propulsors and the pressure distribution at the propulsor fan-face for the boundary layer ingesting D8 aircraft, and examines the dependence of the model, the propulsor and the flight condition on the inlet distortion. Use is made of mini-tuft flow visualization and five hole probe...
master thesis 2015
document
Desmedt, S.G.L. (author)
The area of interest for this study is the field of uncertainty quantification in computational fluid dynamics. The goal is to contribute to a new method to perform uncertainty quantification analyses for industrial, computationally expensive CFD simulations. To this end, an adaptive grid refinement method is developed. The existing sparse grid...
master thesis 2015
Searched for: mods_note_programme_s%3A%22Aerodynamics%22
(1 - 20 of 24)

Pages