Searched for: mods_note_programme_s:"Integrated%5C+Product%5C+Design"
(1 - 20 of 306)

Pages

document
Kolthof, Meike (author)
In this Master Thesis the potential of Additive Manufacturing on-board vessels of Heerema Marine Contractors is looked into, with the goal to design a recommendation for implementing this technology. Heerema is an offshore construction company that is intrinsically motivated to improve their sustainability. They transport, install and remove all...
master thesis 2020
document
Aten, Elsemiek (author)
Hyperthermia is becoming a bigger problem with higher temperatures. It has gotten more attention in the news for the upcoming Olympic Games in Tokyo, and for big marathons where this is becoming an increasing problem. Whereas, able-bodied persons are able to dissipate heat by means of sweating, a tetraplegic most likely cannot. When the lesion...
master thesis 2020
document
Vella Bamber, Tomas (author)
This project focuses on enhancing the accessibility of 3D printing for repairers by designing a system in which repairers can collaborate with makers. Repair has become rare in societies with an abundance of cheap goods. However in recent years repair is making a gradual comeback in western culture. Citizen repair initiatives such as Repair...
master thesis 2020
document
Bremmer, Matthijs (author)
Materiom is an online initiative that has been growing an online open source database of bio-based material recipes over the last couple of years. A new category of recipes to be found on this website is the category of bio-based 3D printable materials. The first 3D printable material recipe to emerge in the database was developed at the TU...
master thesis 2020
document
Sluiter, Merlijn (author)
Urinary schistosomiasis is a neglected tropical disease caused by the Schistosoma haematobium parasite. People can get infected when they get into contact with contaminated fresh water. The disease is most prevalent amongst children, farmers and rural communities in Sub-Saharan Africa. Currently, the disease is diagnosed by microscopic egg count...
master thesis 2020
document
Vugs, Stan (author)
Immersive audio is an upcoming innovation within the world of professional audio reinforcement. The amount of possibilities of enhancing the listening experience is enlarged drastically by setting up arrays of speakers in front of and around the audience. Technological advancements make it possible to render recorded audio channels for an...
master thesis 2020
document
de Boer, Isar (author)
The Nederlands Fotomuseum is the Dutch national museum for photography and its archive has the biggest collection of photographic material in the country. Currently, the visitors of the museum have a rather passive role and are merely subjected to the visual artworks in the museum. The museum desires to give the visitors more insight in the...
master thesis 2020
document
Smits, Jorinde (author)
This IPD (Integrated Product Design) master thesis describes the development of the LooWee. The LooWee was developed in collaboration an electric wheelchair user in search for a new toileting solution for female wheelchair users. The goal of this thesis was the further research the idea and design a new toileting solution that could replace the...
master thesis 2020
document
Bon, Milly (author)
The goal of the project is formulated. The process to tackle the project is visualised. The goal of this project is: Building a cost-effective, compact and simple 3D printer that can print electronics for technical integration of prototypes. This thesis is the basement of this project goal, therefore the focus was on developing the extruder that...
master thesis 2020
document
Tseng, Ghislaine (author)
In the Netherlands, around 100,000 people become a victim of sexual violence each year, 90% of which are female, and mostly between 12-24 years old. ‘’Sexual violence is a term used for all sexual acts that someone is forced to perform, undergo or see. It may involve sexual assault, rape or sexual abuse.’’ (Centrum Seksueel Geweld, 2019). The...
master thesis 2020
document
van Doesum, Frank (author)
Magnetic resonance imaging (MRI) is a medical diagnostic imaging technology characterized by its high cost and infrastructure demands. This makes it unsuitable for implementation in low- and medium-income countries. Its costs are directly related to the strength of the system’s magnetic field. Therefore, an MRI scanning technology dedicated for...
master thesis 2020
document
Ahsmann, Laura (author)
This thesis explains the research into and implementation of overuse lower-limb injury prediction among military recruits, using wearable plantar-pressure sensing and biomechanical gait algorithms. The research has been done with the purpose of designing a usable, affordable and accurate injury-prevention tool, increasing both military wellbeing...
master thesis 2020
document
van Manen, Max (author)
At this point, around 280.000 people are living with dementia in the Netherlands and this number is expected to grow significantly in the coming decades due to the aging population. It is expected that by 2040 the number of people with dementia will grow to 520.000 and expand to over 620.000 people by 2050 (Alzheimer Nederland, 2018). This puts...
master thesis 2020
document
Weetzel, Max (author)
In the aftermath of a disaster, Humanitarian Aid Organizations must operate in highly uncertain and complex contexts in order to provide the lifesaving aid to the people in need. However, the systems currently available to them are limiting the aid logistics, leaving victims cut off. Affordable options are not well suited for the devastated...
master thesis 2020
document
Azzalini, Omar (author)
This thesis tackles the designing of a small-scale alkaline electrolysis cells (AEC) unit for large-scale production. This apparatus is applied for the production of pressurised hydrogen by employing solar energy. The goal is to minimise production costs while ensuring the safety of the unit operation throughout its lifespan. Although the...
master thesis 2020
document
Vis, Nathalie (author)
This thesis looks into the application of self-reinforced polypropylene (SRPP) in a tablet cover for the company Gecko Covers. Gecko Covers is a company that provides protection for devices in the form of covers and sleeves. They are performing at their best in the tablet market. They would like to enter the impact resistant tablet cover market...
master thesis 2020
document
van Tongeren, Edwin (author)
Previous research proved the potential of using mussel shell waste as additive manufacturing (AM) material. In this thesis, mussel shell powder was combined with sodium alginate, since it allows reversible cross-linking. Due to reversible cross-linking, this water-soluble and recyclable material can temporarily be made water-resistant, so it can...
master thesis 2020
document
Looijen, Timo (author)
Javelin throwing in the winter is not fun when the temperature approaches zero degrees. That is way javelin throwers move indoors for training. The problem with training indoors it that there is no room to throw a javelin 80 meters, so a different type of training is used. The javelin fitted with a rubber tip is thrown into a net. This way, the...
master thesis 2020
document
Gębala, Anna (author)
Ability to provide the first aid is one of the most powerful skills which can save someone’s life. The survival rate of out of hospital cardiac arrest in Europe is only 9%, even though AED (automated external defibrillators) can be accessed in public places to treat it successfully in most of the cases. First aid training is recognised as the...
master thesis 2020
document
Keesmaat, Patrick (author)
An autonomous guided vehicle can be used for the delivery of goods. To deliver these goods to your home, the mobile robot will be driving in pedestrian rich environments. In these environments the robot will need to socially navigate itself in a way which is both pleasant for the pedestrians and progressive for the robot. During its drive, the...
master thesis 2020
Searched for: mods_note_programme_s:"Integrated%5C+Product%5C+Design"
(1 - 20 of 306)

Pages