Searched for: mods_note_programme_s:"Integrated%5C+Product%5C+Design"
(1 - 20 of 212)

Pages

document
Terra, K. (author)
This report presents the product proposal for a new training tool for ultrasound guided regional anesthesia. The training tool's working principle is based on adjustability and persnoal influences on the composition of the product.
master thesis 2009
document
Orth, T.I. (author)
Urban Transport Vehicle Service is a low-end manifestation of a more general idea of integrating public and personal transport as a more sustainable way of mobility. The aim of UTVS is to make this integral system more efficient in door to door journeys compared to the private car use as a typical less sustainable choice. This report describes...
master thesis 2009
document
Van der Vaart, N.C.M. (author)
Analysis of the absenteeism among KLM pilots showed that much more KLM pilots (5,8%) are reporting absenteeism due to back problems than the average KLM employees (4,4%). Besides, KLM Operations receives yearly a lot of complaints concerning the comfort of the cockpit seats. Since the absenteeism of pilots due to back problems cost KLM yearly a...
master thesis 2009
document
Noorlander, P.P. (author)
In general, for transportation of wheelchairs by taxi buses, so called ‘four-point strap-type tiedown systems’ are used for securing wheelchairs. At four points around the wheelchair self-retracting straps are connected to the vehicle floor. These straps are equipped with hooks which can be attached to various points of the basic geometry of the...
master thesis 2010
document
Van Daalen, T.F. (author)
A rigger system is a mechanism on a single scull, a fast rowing boat designed for a single person. The system facilitates an optimal row performance accelerating the boat to a considerable speed. In the sport of competitive rowing the traditional sliding seat mechanism is used. Although the system became controversial in competitive rowing,...
master thesis 2010
document
Van Ewijk, J.R. (author)
Founded in 2006 by the head of design Jan-Willem Sintnicolaas, Van Nicholas started as a family company. Nowadays, the team is extended by several employees. The founder, Jan-Willem Sintnicolaas, was the main European importer of Airborne Bicycles (USA), until the bankruptcy of Airborne in 2006. Owing to this Van Nicholas Bicycles has mastered...
master thesis 2010
document
Bunk, H.L. (author)
This master thesis shows the design process of Precimo, a product that supports pregnant women at home. Pregnancy is a special time and the bonding process between the expectant mother and the unborn are of vital importance. During the thesis project a literature research and contextmapping research were executed, followed by the...
master thesis 2010
document
Nolten, E.F. (author)
The Dutch strollers are known for their high quality in combination with aesthetic appealing design. Milk Design B.V. positions their JOOLZ strollers as ergonomic with hand crafted finishing. User studies show that parents encounter many problems and notice deficiencies in their stroller, especially while shopping. Two new accessories for the...
master thesis 2010
document
Eskonen, H. (author)
This project seeks to determine how the recreational tent could become a more integral part of the camping experience. Instead of looking at “what is wrong” with current tents, this project focuses on defining how the recreational tent can better fit into the user’s outdoor experience. By focusing on the factors that make outdoor recreation...
master thesis 2011
document
Beeftink, A. (author)
This report is the result of a graduation project executed at the Delft University of Technology for the company Shonaquip, situated in Cape Town. The most important parties that are involved in this project are the University, Shonaquip, Sander Projects and me. The context of the new wheelchair is South Africa, where also a part of the design...
master thesis 2011
document
Van der Walle, F.R. (author)
The outdoor furniture branch is based on municipalities concessions. It is common that tenders should be formulated in a short period of time, which requires quick thinking and ready-to-use concepts. Therefore JCDecaux would like to have an up-to-date list of demands and wishes of the modern public transport stop and an inspirational concept....
master thesis 2011
document
Koekoek, A.R. (author)
Current solutions for energy supply of electrical equipment in gardens are very limited and do not suffice. The inductive energy distribution concept that was developed by the company E-Snake BV, named E-Snake, could be a solution, by providing simple electrical installation that allows for flexible take-off. However, the usability of the...
master thesis 2011
document
Duquesnoy, G.B.G. (author)
On warm days, the canals in Dutch cities swarm with sloops: small open boats. They are well-suited for this. The weather, however, is not always sunny and warm. This project focuses on the design of a new type of sloop which is suited for long trips without compromising its usability on short trips with many people. The resulting draft design...
master thesis 2011
document
Dekkers, S.C. (author)
The trampoline sport was investigated. Tests and interviews with athletes and coach showed the high impact on the lower extremities of the athletes during their exercises. In the ideation the solution space was converged, the freedom of movement of the athletes gave insight in the suspension of the athletes in the twisting belts. But in the end...
master thesis 2011
document
Soerjo, E.A.A. (author)
This Integrated Product Design master thesis comprises a report of the process of designing a water transport hub concept for Stadshavens Rotterdam, based on the experience of travel and transfer. It was executed for Gemeentewerken Rotterdam. ASSIGNMENT The inital assignment was to create a ‘climate-neutral transport hub’ for the future...
master thesis 2011
document
Mense, R.T. (author)
Development of an electric drive for the Rollz rollator in order to create a mobility aid that holds the middle between a rollator and a mobility scooter. The security of an electric drive to fall back on in case of need gives elderly the confidence to walk more often and leave the mobility scooter at home.
master thesis 2011
document
Yao, X. (author)
Identify and design a new type of application where uniform LED Lines are a promising opportunity, in a mass production level. Preferably market segments are professional lighting or consumer lighting. Explore this application through creation of product concepts, and value on performance such as costs, efficiency, and so on.
master thesis 2011
document
Guido, R. (author)
The design of Freeride skis rarely relies on well argumented technical decisions. The goal of this project is to design this product from an engineering perspective. An extensive analysis is enriched by a laminate research that arguments the choice of fibers and the production method. Measurement tools are developed to investigate the geometry...
master thesis 2011
document
Wolswinkel, S.N.A. (author)
Graduation thesis on the design of an unobtrusive EEG capturing device. The design is optimized for signal-to-noise ratio and features a pillow with dry electrodes mounted on the casing, the electronics for amplification and processing are integrated in the product, and can send the recorded signal wirelessly to an external platform via...
master thesis 2012
document
Hermsen, P.E.H. (author)
Waag Society is in institute for art, science and technology that tries to bridge the gap between upcoming technologies, society and art. Waag Society is a non-profit organisation which is is only marginally subsidised. Most of their budget comes forth out of project financing. By coming up with new ideas, experiments and initiatives different...
master thesis 2012
Searched for: mods_note_programme_s:"Integrated%5C+Product%5C+Design"
(1 - 20 of 212)

Pages