Searched for: mods_note_programme_s:"Integrated%5C+Product%5C+Design"
(81 - 100 of 211)

Pages

document
Vledder, Gerbera (author)
Airline profit margins are very small. In a highly competitive market, the challenge is to differentiate from other airlines. Differentiation within an airplane is difficult, because of the rigidity of an airplane and the strict regulations. The economy is in a lift, businesses allow their employees to fly business class more often. First class...
master thesis 2017
document
Nachenius, Auke (author)
This thesis contains the concept of a hand held device that is able to measure and classify the stem of avenue trees in a more automated matter with the ability to process the results digital. The measure concept is based on the technique of triangulating a 2D profile by using a slit laser and camera.
master thesis 2017
document
van den Brink, Nicas (author)
Prostate cancer is the most common type of cancer for Dutch males. 1 out 9 males is diagnosed with prostate cancer during his life. 48% Of the diagnosis is for men older than 70 (IKNL, 2014). Antoni van Leeuwenhoek hospital and Nederlands Kanker Instituut do research in cancer diagnostics. This graduation project focuses on the development of a...
master thesis 2017
document
Salomon, Daniel (author)
This report will describe the analysis of two topics: the pheromone based communication method used by ants in their foraging behaviour, and the phenomenon of trade fairs. This natural communication model has been analyzed and its defining characteristics have been abstracted, after which they have been used to design a product that solves the...
master thesis 2017
document
Peeters, Bart (author)
The Curatio is a low-cost hand scanner which allows fast capture of accurate 3D hand scans, developed at the TU Delft in cooperation with Vectory3. Research done by several graduate students has produced reliable and accurate hand scans. Adding infrared thermographic imaging was deemed the next step forward in the scanner’s development.

master thesis 2017
document
Smit, Kai (author)
The dispenser project focused on developing an external vision for a dispenser range for the future washroom in office buildings, retirement homes, and hotels. The project resulted in a foldable dispenser that reduces sustainable impact by decreasing its volume during transport. Another part was wrapping the dispenser to let end customers be...
master thesis 2017
document
Moonen, Leonard (author)
This master thesis project explores the use of Photoplethysmogram[PPG] technology to detect of Atrial Fibrillation[AF]. This project proposes a product-service service system for the detection and diagnosis of AF in the current healthcare system in The Netherlands. This thesis is based on interviews with cardiologists, general practitioners and...
master thesis 2017
document
Meijs, Olmo (author)
The consumer market shows a growing heterogeneity in demand. This means that consumers are more and more looking for custom and unique products. As a reaction, companies developed a new strategy called Mass Customization (MC) which revolves around offering products that are developed and produced custom to user specific needs. Via online tool...
master thesis 2017
document
van de Water, Tom (author)
This project is executed for Cesys, a company which develops and produces high-end, innovative racing simulators for the entertainment industry. Recently, the company started using Virtual Reality headsets on their racing simulators. Currently, a consumer grade VR headset (Oculus Rift) is used in these type of racing simulators. However, it...
master thesis 2017
document
Smit, Bas (author)
This master thesis discusses the design of a 3D printed integrated miniature valve to control the air and flow rate in pneumatic soft robotics. The valve is able to control multiple bellows from inside the body of the soft robotic by only using one tube of air supply. The valves are actuated by Shape Memory Alloy actuator wires, named Flexinol....
master thesis 2017
document
Hage, Catherine (author)
Every year 550 children are diagnosed with a cancer in the Netherlands. Currently a new hospital is being built in Utrecht, the Prinses Maxima Centrum for child Oncology, this hospital will focus solely on paediatric oncology.

The families that deal with child cancer have to go to the hospital frequently and spend long days there. These...
master thesis 2017
document
Hayde, Zsolt (author)
This graduation project is based on the design brief where Microsoft identifies durability issues with its Xbox One controller. During the project a modular controller was developed. The design of the modular controller consists of 4 interchangeable parts, each sliding into one of the four designated areas located on the top side of the Modular...
master thesis 2017
document
Echavarria Restrepo, Maria (author)
This master thesis explores how to extend the product line of the Dutch stroller company JOOLZ with products that support parents in their homes. Traditionally JOOLZ designs , but want to explore possibilities beyond this market segment. The focus of the assignment is parent life in a large metropolis, such as Tokyo, New York and Amsterdam....
master thesis 2017
document
van der Meer, Marcel (author)
One of the major challenges that low income countries have been facing for decades is to attain food security. The project covered in this report investigates how solar adsorption refrigeration technology can be used to achieve a higher level of food security in West-Africa. More specifically, the study aims to conceptualize suitable product...
master thesis 2017
document
Vork, Lisa (author)
In the emerging field of data science many exciting things are happening. Through the Internet of Things, health trackers and more we are collecting all kinds of data, that allow us to learn more about the world around us than we could have ever imagined. But how do we deal with this as designers? Why would we design with data, and how can we?...
master thesis 2017
document
van der Meer, Timme (author)
This project explores the potential of virtual reality (VR) as a training tool at the crew safety & security training (CSST) department of the Royal Dutch Airlines (KLM). With a research and prototype driven approach, a VR simulation and its integration into the training programme are designed. This simulation aims to improve stress...
master thesis 2017
document
van der Werf, Bas (author)
This graduation project started as a continuation of an earlier design project. The design team Bdot, a group of students from the TU Delft, made a concept design for the company Merford. After the success of the Bdot concept, Merford was inspired to continue development further to a high fidelity prototype or even production. The open workspace...
master thesis 2017
document
Dawdy, Gray (author)
The arrival streaming technologies has changed the way people interact with and bring their music. Similar technological shifts in the automotive industry are poised to heavily change the driving experience. Bang & Olufsen, the Danish high-end audio manufacturer, wants to investigate these changing experiences in order to discover an...
master thesis 2017
document
Evers, Jeremy (author)
Since the expiration of the FDM printing patent by Stratasys in 2009, Fused Deposition Modeling(FDM) printing has taken a large step towards accessible consumer 3D printing. Also, more knowledge is sought in the process of FDM printing and optimizing quality as the layer by layer deposition inevitable results in poor surface quality. This study...
master thesis 2017
document
Kadarman, Randy (author)
This graduation thesis is about finding a meaningful application for the emerging technology of 3D food printing within the cultural context of urban Japan. The method was based on Verganti’s Design driven innovation to (re)define the meaning of the product. The analysis phase deconstructed the product into its physical capabilities and its...
master thesis 2017
Searched for: mods_note_programme_s:"Integrated%5C+Product%5C+Design"
(81 - 100 of 211)

Pages