Searched for: mods_note_programme_s:"Microelectronics"
(1 - 20 of 68)

Pages

document
Šabanović, Armin (author)
This thesis introduces the concept of phase rotation cancellation (PRC) as a previously unknown error mechanism in narrow-band FSK systems, and proposes a new FSK demodulation algorithm to resolve PRC errors. Phase rotation cancellation is defined as an event where the signal phasor rotation in the IQ plane is temporarily cancelled by the...
master thesis 2019
document
van Hoek, Vincent (author)
This thesis describes the design of an ultra-low power temperature to digital converter. It is intended to monitor the excess heat produced during the wireless charging of implantable medical devices such as pacemakers. The TDC is designed to achieve an accuracy of ±0.1 °C (3 sigma) from 27 °C to 47 °C, and ±0.3 °C (3 sigma) from -40 °C to 85 °C...
master thesis 2019
document
Newadj, Kiren (author)
Clean drinking water is still not widely available around the globe and therefore remains an unsolved issue. In fact, 1 in 9 people lack daily access to safe water and sanitation. Groundwater is a water supply source that needs minor treatment and thereby presents itself as a good solution to this global issue. Especially in development...
master thesis 2019
document
Mes, Johan (author)
The Self-Organizing Map (SOM) is an unsupervised neural networktopology that incorporates competitive learning for the classicationof data. In this thesis we investigate the design space of a system incorporating such a topology based on Spiking Neural Networks (SNNs), and apply it to classifying electrocardiogram (ECG) beats. We present novel...
master thesis 2018
document
Mirzaei, Farzad (author)
This work introduces an architecture that is capable of reducing the number of cables coming out of an ultrasound receiver ASIC by a substantial factor without dropping the frame-rate. It employs a newly developed technique named compressive sensing to exploit the ultrasound signal redundancies in the spatial domain.<br/>There are 32 receive...
master thesis 2018
document
Baquer Gómez, Gerard (author)
"The use of high-frequency stimulation for conduction block of the pudendal nerve has potentially high benefits for patients suffering from non-neurogenic urinary retention. Special care has to be put in the design of stimulation parameters to ensure safe operation and prevent electrode and tissue damage. While high-frequency conduction block...
master thesis 2018
document
Zhang, Mengyu (author)
Quantum microarchitecture is a key component in bridging the gap between quantum software and quantum hardware of a fully programmable quantum computer. Confronting the control problem of superconducting quantum processors, an experimental microarchitecture (QuMA) has been proposed in previous work. As the size of the target quantum chip...
master thesis 2018
document
Sharma, Shreea (author)
The European Union has established two directives that require both public and private buildings to become<br/>nearly zero energy by 2020. This has increased public interest in and development of building integrated<br/>photovoltiac (BIPV) systems. One such BIPV solution is the PowerWindow by Physee. Even though the PowerWindow<br/>does not...
master thesis 2018
document
Snaevarsdottir, Fjola (author)
Imaging sensors are remarkable devices which are able to capture moments and present them in a form available to us for years to come. With the use of material properties and photon particles, charges can be produced which, in combination with electric circuitry, transform into information understandable to the human eye and eventually the brain...
master thesis 2018
document
van der Heijden, Wouter (author)
Electromagnetic Compatibility (EMC) is a growing issue in the automotive industry. Integrated Circuits (IC's) must adhere to strict Electromagnetic Emission (EME) and Electromagnetic Susceptibility (EMS) regulations to ensure safety in the automotive vehicle. The Internal Supply Regulator (ISR) plays a critical role in the EMC performance of an...
master thesis 2017
document
Rout, S. (author)
With the bandwidth of the ECG signal extending from sub-Hz to 200 Hz, a major challenge for an ECG readout system lies in implementing the high-pass (HP) cut-off frequency as this translates into the realization of large time constants on-chip.Although techniques such as those based on the use of pseudo-resistors to obtain very large time...
master thesis 2016
document
Bellamkonda, R. (author)
This thesis describes the design and measurement of an IC which can digitize both capacitance and temperature. Capacitance sensing functionality is added to an existing Temperature to Digital Converter (TDC) without adding significant die area. Two kinds of baseline capacitance compensation techniques have been investigated and their performance...
master thesis 2015
document
Shen, Y. (author)
A new method of flexible interposer with vertically aligned carbon nanotube (CNT) embedded in polymer is proposed in this thesis. Interposer, working as electrical routing between different sockets or connections, is being used for spreading connections and rerouting in packaging technology nowadays. With the rapidly growing application of...
master thesis 2015
document
Van der Meulen, J.M.M. (author)
SiGe bipolar amplifiers are getting more competitive in terms of noise figure to GaAs amplifiers. However, the linearity of these amplifiers is still limited in view of these GaAs implementations. In order to address and overcome these linearity limitations, this thesis report will start demonstrating that the linearity of SiGe bipolar...
master thesis 2015
document
Yi, H. (author)
On chip grown CNT nanofoam has a large surface to volume ratio and excellent thermal electrical properties, which is suitable to be used as a thermoacoustic heater. The highly porous foam exchanges heat with surrounding air efficiently. Every processing step is specifically designed to be CMOS compatible using cleanroom microfabrication. This...
master thesis 2015
document
Zhang, R. (author)
This thesis presents a 1-Mega pixels high-dynamic range and UV sensitive image sensor in 0.18 µm technology with 14-bit interleaved 64Ms/s SAR ADC. It can achieve 64 fps and 101 dB dynamic range. The pixel array contains three kinds of pixel: UV pixel, visible pixel and low blue pixel. Those three kinds of pixel form a special 4×4 kernel to meet...
master thesis 2015
document
Karykis, G. (author)
This thesis discusses the d es ign and verification of a high-resolution self-timed incremental ?? ADC. The first self-timed incremental ?? ADC was presented by C.Chen et.al at ISSCC 2013 and this work targets to improve the resolution, linearity and energy-efficiency of a self-timed ADC. Unlike conventional ?? ADCs, a self -timed ADC is capable...
master thesis 2015
document
Liu, X. (author)
master thesis 2014
document
Wang, J. (author)
DC-DC converters are critical building blocks in energy harvesting systems which are applied to provide the energy for the implantable biomedical devices. They are required to meet very strict specifications and consume as less power as possible. Therefore, their power conversion efficiency and stability of the functionality in the varying...
master thesis 2014
document
Chen, P. (author)
The technology scaling favors the Digital PLLs, which is reconfigurable. In the traditional fractional-N ADPLL, whether counter-based or divider based, DCO and TDC are the main two power consuming blocks. Modifying the phase detection part based on phase prediction makes the architecture more energy-efficient. The new architecture leads to the...
master thesis 2014
Searched for: mods_note_programme_s:"Microelectronics"
(1 - 20 of 68)

Pages