Searched for: project%3A%22EE3L11%255C+Bachelor%255C+graduation%255C+project%255C+Electrical%255C+Engineering%22
(1 - 7 of 7)
document
Bouma, Eline (author), Damoiseaux, Luke (author), Groeneveld, Jorik (author)
The increase in non-linear loads of modern electronics raises concerns over power quality. Additionally, existing power-quality analyzers are expensive and not intended for household use. This thesis aims to develop a single-phase, user-friendly power-quality analyzer using a Raspberry Pi 4 Model B with an emphasis on low cost and class S...
bachelor thesis 2024
document
de Waal, Jeremy (author), Rauf, Namo (author)
Before the project was started, there was an energy system integrator demonstrator. This demonstrator was purely software, there was no physical interaction possible with it. It demonstrated the energy system by simulations. The objective of this project was to design and built peripherals that represents the components of an energy system....
bachelor thesis 2023
document
Mazurovs, Maxim (author), Schat, Daan (author)
This thesis presents the design and development of a UV-C LED-based seed treatment machine aimed at enhancing seed quality by the extermination of pathogens. The research covers design choices, including a round irradiation pattern, consisting of two rings with three and nine LEDs for the inner and outer ring respectively, the use of a quartz...
bachelor thesis 2023
document
Neji, Saliha (author), Kooij, Roeland (author)
This thesis analyses different radar systems for sensing chest movement to detect human presence inside a car. The detection in this thesis is limited to sensing breathing rate, although heartbeat detection is considered a possibility. A comparison is made between CW-, FMCW-, pulsed- and UWB pulsed radar. UWB pulsed radar was chosen to be a...
bachelor thesis 2020
document
Eveleens, Richard (author), Gottmer, Leila (author), Haarman, Mart (author)
This thesis report focuses on possible methods of digital implementation of motional feedback in a bass loudspeaker. In this thesis, the control system will be created for a monopole and a dipole speaker specifically. It does so by sketching the outlines of such a system and examining possible designs for the components required to suppress...
bachelor thesis 2020
document
Vette, Marek (author)
This thesis is part of the development of a sensor system for measuring currents in the Nuna solar car. A big problem within this system is the processing of incoming sensor data. Therefore, a solution in the form of a sensor-data-processing-unit was proposed, with its primary focus on the analog-to-digital conversion. The converter should not...
bachelor thesis 2018
document
Treffers, Michael (author), Melman, Bart (author)
Current trailers and caravans use overrun brakes, which cause overheated brakes in the mountains. A solution is to design an electric brake system in which the brakes are controlled electronically instead of mechanically. The report discusses the control models associated with braking, anti-sway detection and velocity sensor fusion. The RDW...
bachelor thesis 2017
Searched for: project%3A%22EE3L11%255C+Bachelor%255C+graduation%255C+project%255C+Electrical%255C+Engineering%22
(1 - 7 of 7)