- document
-
Belloni, C. (author), Korving, L. (author), Witkamp, G.J. (author), Brück, E.H. (author), Dugulan, A.I. (author)Iron oxide-based adsorbents showed potential to reach ultra-low phosphorus (P) concentrations to prevent eutrophication and recover P. High affinity, high capacity at low P concentrations (<1 mg L<sup>−1</sup>), good stability, and reusability of the adsorbent are key factors for economic viability. In this study, nanoparticles of goethite...journal article 2024
- document
-
Hosseini, A. (author)HIsarna is a new and breakthrough smelting reduction technology for producing liquid hot metal for steelmaking directly from iron ores. Compared to the conventional blast furnace route, HIsarna achieves a 20% reduction in CO2 emissions by eliminating coking and the need for iron ore agglomeration processes such as sintering and pelletizing and...doctoral thesis 2023
- document
-
Phongprueksathat, N. (author)Since the industrial revolution in the 1760s, the CO2 concentration in the atmosphere has been rising incessantly driving global warming closer to the point of no return. The world requires urgent actions to not only reduce CO2 emissions but also capture the CO2 for utilization to mitigate the future environmental crisis. CO2 hydrogenation to...doctoral thesis 2023
- document
-
Kosimov, Akmal (author), Alimbekova, Amina (author), Assafrei, Jurgen Martin (author), Ahmadi, Majid (author), Roohi, K. (author), Taheri, P. (author), Pinto, Sara M. (author), Cepitis, Ritums (author), Baptista, Antonio J. (author), Kongi, Nadezda (author)Efficient and sustainable synthesis of performant metal/nitrogen-doped carbon (M-N-C) catalysts for oxygen reduction and evolution reactions (ORR/OER) is vital for the global switch to green energy technologies-fuel cells and metal-air batteries. This study reports a solid-phase template-assisted mechanosynthesis of Fe-N-C, featuring low-cost...journal article 2023
- document
-
Trapp, S. (author), Lammers, Tom (author), Engudar, Gokce (author), Hoehr, Cornelia (author), Denkova, A.G. (author), Paulssen, E. (author), de Kruijff, R.M. (author)Background: The radionuclide Ga-68 is commonly used in nuclear medicine, specifically in positron emission tomography (PET). Recently, the interest in producing Ga-68 by cyclotron irradiation of [<sup>68</sup>Zn]Zn nitrate liquid targets is increasing. However, current purification methods of Ga-68 from the target solution consist of multi...journal article 2023
- document
-
Liu, S. (author), Popov, M. (author), Belda, Nadew (author), Smeets, Rene (author), Liu, Zhiyuan (author)This paper deals with the development of an accurate finite-element model of an arrester to investigate the electrothermal and mechanical stress during dc current interruption. The comprehensive analysis performed on a ZnO surge arrester is supported by experiments during high-voltage dc circuit breaker current interruption. The performed...journal article 2022
- document
-
Dong, J. (author), Tümer, N. (author), Leeflang, M.A. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zadpoor, A.A. (author), Zhou, J. (author)Porous biodegradable Mg and its alloys are considered to have a great potential to serve as ideal bone substitutes. The recent progress in additive manufacturing (AM) has prompted its application to fabricate Mg scaffolds with geometrically ordered porous structures. Extrusion-based AM, followed by debinding and sintering, has been recently...journal article 2022
- document
-
Mousavi Rad, Sina (author), Kamboozia, Neda (author), Anupam, K. (author), Saed, Seyed Ataollah (author)First, porous asphalt (PA) pavement possesses a lower strength and lifetime compared to typical dense-grade asphalt mixtures due to its large empty space structure. Second, PA pavements' fatigue life and durability are affected significantly by climate factors; the two most critical factors being aging conditions and moisture actions. Third,...journal article 2022
- document
-
Hosseini, A. (author), Moosavi-Khoonsari, Elmira (author), Meijer, Koen (author), Hage, Johannes (author), Peeters, Tim (author), Offerman, S.E. (author), Yang, Y. (author)HIsarna reactor is characterized by a high raw materials versatility and is therefore attractive for processing secondary iron sources. Among the materials that can be recycled through HIsarna, zinc-bearing material has drawn a special attention. Based on the plant data, once dust-containing Zinc was injected into the main reactor, a final...journal article 2022
- document
-
van Ginkel, H.J. (author), Orvietani, M. (author), Romijn, J. (author), Zhang, Kouchi (author), Vollebregt, S. (author)In this work, a novel microfabrication-compatible production process is demonstrated and used to fabricate UV photoresistors made from ZnO nanoparticles. It comprises a simple room-temperature production method for synthesizing and direct-writing nanoparticles. The method can be used on a wide range of surfaces and print a wide range of...conference paper 2022
- document
-
Yamashita, Yudai (author), Ruiz Tobon, C.M. (author), Santbergen, R. (author), Zeman, M. (author), Isabella, O. (author), Suemasu, Takashi (author)We performed advanced opto-electrical simulations on thin-film BaSi<sub>2</sub> solar cells. First, absorption spectra of BaSi<sub>2</sub>-pn homojunction solar cells on Si substrate were calculated based on flat and/or pyramidally-textured surfaces, wherein 20-nm-thick n<sup>+</sup>-BaSi<sub>2</sub> was the topmost electron transport layer....journal article 2021
- document
-
Strijker, Mirthe (author)During the production of steel, a dust waste stream is created that contains a significant amount of zinc which makes it difficult to treat and to recycle. Various furnaces have been developed that can deal with those dusts like rotary hearth furnaces and the DK process but none are fully optimal yet. HIsarna, a furnace in development by Tata...master thesis 2020
- document
-
Shi, H. (author)Zinc smelters in the European Union are now facing a lot of problems, especially under the attack of the Covid-19. This study reviewed the situation of the zinc smelting industry in the EU, including production methods, application of raw materials, pollution control, and waste treatment. The vast majority of smelters use hydro-metallurgical...student report 2020
- document
-
Desta, F.S. (author), Buxton, M.W.N. (author), Jansen, Jeroen (author)The increasing availability of complex multivariate data yielded by sensor technologies permits qualitative and quantitative data analysis for material characterization. Multivariate data are hard to understand by visual inspection and intuition. Thus, data-driven models are required to derive study-specific insights from large datasets. In the...journal article 2020
- document
-
van Hengel, I.A.J. (author), Putra, N.E. (author), Tierolf, M. W.A.M. (author), Minneboo, M.B. (author), Fluit, A. C. (author), Fratila-Apachitei, E.L. (author), Apachitei, I. (author), Zadpoor, A.A. (author)Antibiotic-resistant bacteria are frequently involved in implant-associated infections (IAIs), making the treatment of these infections even more challenging. Therefore, multifunctional implant surfaces that simultaneously possess antibacterial activity and induce osseointegration are highly desired in order to prevent IAIs. The incorporation...journal article 2020
- document
-
Li, Y. (author), Pavanram, P. (author), Zhou, J. (author), Lietaert, K. (author), Taheri, P. (author), Li, W. (author), San, H. (author), Leeflang, M.A. (author), Mol, J.M.C. (author), Jahr, H. (author), Zadpoor, A.A. (author)Additively manufacturing (AM) opens up the possibility for biodegradable metals to possess uniquely combined characteristics that are desired for bone substitution, including bone-mimicking mechanical properties, topologically ordered porous structure, pore interconnectivity and biodegradability. Zinc is considered to be one of the promising...journal article 2020
- document
-
Coelho, L. B. (author), Fava, E. B. (author), Kooijman, A.M. (author), Gonzalez Garcia, Y. (author), Olivier, M. G. (author)The effect of sodium molybdate in inhibiting galvanic corrosion of Zn coating and mild steel is addressed. The inhibitor's performance was appraised by Zero Resistance Ammeter on HDG/mild steel galvanic coupling model in 0.05 M NaCl (+5 mM Na<sub>2</sub>MoO<sub>4</sub>) media. The effectiveness of Na<sub>2</sub>MoO<sub>4</sub> was evaluated...journal article 2020
- document
-
Kerry, T.J. (author), Peters, Alexander (author), Georgakopoulos, E. (author), Hosseini, A. (author), Offerman, S.E. (author), Yang, Y. (author)The steelmaking industry produces large quantities of zinc-bearing wastes of varying forms that cannot be treated through integrated steelmaking processes. Simultaneously, by-products of the zinc industry containing great amounts of iron and zinc are stored or landfilled. The amount of zinc in these materials is generally below that which is...conference paper 2020
- document
-
Peters, Alexander (author)HIsarna is a new furnace technology in the steel industry, featuring a large reduction of CO<sub>2</sub>-emissions of up to 80%, and offering larger tolerances for gangue materials. Additionally, it has potential for zinc enrichment in the flue dust, as it can quickly vapourise zinc in the feed material and reject it to the flue dust. Increasing...master thesis 2019
- document
-
Grotenhuis, Raisa (author)Background. The past four decades, the problem of resistant bacteria has emerged. As a result of biofilm formation of (resistant) bacteria on the implant, more implant-associated infections (IAI) occurred. This has caused an increase in orthopaedic implant revisions, causing a high burden of disease. To overcome the rising problem of resistance,...master thesis 2019