Searched for: subject%3A%223D%255C+modelling%22
(1 - 20 of 86)

Pages

document
Huizer, Rick (author)
3D modeling techniques can be used to automate processes such as damage assessment in aircraft engines. Aircraft engines often have shiny and non-textured surfaces, where these modeling techniques often have poor performance. This paper gives more insight into the performance of interest detection/matching algorithms on shiny and non-textured...
bachelor thesis 2021
document
Roebroeks, J. (author)
Merging interior and exterior laser scanning point clouds of the historical windmill, completing the missing parts from airborne laser scanning data and trying different mesh generation methods for full 3D windmill model generation in order to be able to perform virtual visits in the future.
bachelor thesis 2015
document
Van Dijk, N.N. (author)
The Dutch subsoil contains a lot of archaeological remains that need to be preserved for future generations. Until now, it is not possible to predict if these remains will stay intact under the pressure of a manmade structure like an embankment. The goal of this research is to investigate the behaviour of assemblies of artificial archaeological...
bachelor thesis 2014
document
Schootstra, J. (author)
Detailed mapping and 3D structural modeling of the area around St. Nazaire le Desert, in the French Subalpine Basin, which structures had not been modeled previously, was performed in order to understand its structural evolution. The completed 1:25,000 scale mapping of the 52km2 area, reveals various structural domains based on regional...
bachelor thesis 2012
document
Manda, Sebastian (author)
Trees are essential components of both real and digital environments. Therefore, it is important to have 3D models of trees that are of high quality and computationally efficient. One way to achieve this is by compressing a high-quality model using billboard rendering, which involves partitioning the tree into multiple planes to produce a...
bachelor thesis 2024
document
Tekavec, Jernej (author), Lisec, Anka (author)
This article focuses on 3D indoor modelling of buildings using cadastral data as an alternative way of indoor spatial data acquisition. Despite the rapid development of indoor spatial data acquisition technology, there are no existing solutions that would enable mass acquisition of indoor data. The main motivation for our research was the...
conference paper 2018
document
Abdul Rahman, Alias (author), van Oosterom, Peter (author), Chee Hua, Teng (author), Sharkawi, Khairul Hafiz (author), Duncan, Edward Eric (author), Azri, Norsuhaibah (author), Hassan, Muhammad Imzan (author)
Three-dimensional (3D) modelling of cadastral objects (such as legal spaces around buildings, around utility networks and other spaces) is one of the important aspects for a multipurpose cadastre (MPC). This paper describes the 3D modelling of the objects for MPC and its usage to the knowledge of 3D cadastre since more and more related agencies...
conference paper 2012
document
Olivares García, José Miguel (author), Virgós Soriano, Luis Ignacio (author), Velasco Martín-Varés, Amalia (author)
This paper describes the solutions provided by the Directorate General for Cadastre of Spain for the representation and modeling of three-dimensional component (3D) of buildings as objects of cadastral parcels. A first solution is based on incorporating new layers in the Web Map Service (WMS) for static image representation of the 3D component....
conference paper 2011
document
Rua, H. (author), Falcao, A.P. (author), Roxo, A.F. (author)
The idea of ‘city’ has now surpassed its physical concept. The emergence of the Internet and the growing development of information and communication technologies (ICT) have changed the behaviour of our society in the past decade and revolutionised the traditional ways of representing space. The classic 2D (floor plans, sections and elevations)...
conference paper 2013
document
Lee, D. (author), Pietrzyk, P. (author), Donkers, S. (author), Liem, V. (author), van Oostveen, J. (author), Montazeri, S. (author), Boeters, R. (author), Colin, J. (author), Kastendeuch, P. (author), Nerry, F. (author), Menenti, M. (author), Gorte, B.G.H. (author), Verbree, E. (author)
The impact of 3D geometry complexity on the accuracy of simulating radiative, convective and conductive fluxes in an urban canyon was explored. The research involved the collection of meteorological data in an urban canyon in the city of Strasbourg, France, for input into a 3D model called LASER/F, which simulates the aforementioned fluxes. The...
conference paper 2013
document
Kepczynska-Walczak, A. (author)
The aim of this paper is to discuss the role three-dimensional models play in addressing performance issues in virtual reconstructions of the heritage buildings. Heritage visualisation is considered here as a process of representing knowledge about space, time, behaviour, light, and other elements that constitute cultural environments. The...
conference paper 2013
document
Gkeli, Maria (author), Potsiou, Chryssy (author), Ioannidis, Charalabos (author)
The rapid economic and social transformation over the last several years, has led to multiple rearrangements regarding the land administration procedures. Vertically growing cities, complex infrastructure, subdivision of three-dimensional (3D) space through several uses and overlapping property rights have increased the demand for establishing...
conference paper 2018
document
Larsson, Karolina (author), Paasch, Jesper M. (author), Paulsson, Jenny (author)
This paper describes the use of 3D real property formation at a major construction site in Stockholm, Sweden, project Slussen. Real property formation with complex 3D volumes and numerous real properties and associated rights, restrictions and responsibilities (RRRs) has to be shown with the real properties and RRRs in relation to each other....
conference paper 2023
document
Pop, G. (author), Bucksch, A.K. (author), Gorte, B.G.H. (author)
Three dimensional architectural models are more and more important for a large number of applications. Specialists look for faster and more precise ways to generate them. This paper discusses methods to combine methodologies for handling data acquired from multiple sources: maps, terrestrial laser and additional measurements, together with...
conference paper 2007
document
VanLishout, V. (author), Verhagen, H.J. (author), Troch, P. (author)
There is a growing interest in the application of submerged rubble mound breakwaters as coastal defence structures. As their defensive ability highly depends on the amount of wave energy remaining at their lee side, the accurate prediction of the energy in the lee of such structures is of utmost importance. Past experiments have shown that the...
conference paper 2011
document
Kitsakis, Dimitrios (author), Dimopoulou, Efi (author)
Over the last decades, land exploitation is getting more intense in order to satisfy public and private needs of modern societies. The intensification of 3D space exploitation includes complicated rights, restrictions and responsibilities (RRRs) that need to be unambiguously registered. In this direction, the incorporation of 3D aspects of real...
conference paper 2014
document
Vanlishout, V. (author), Verhagen, H.J. (author), Troch, P. (author)
There is a growing interest in the application of submerged rubble mound breakwaters as coastal defence structures. As their defensive ability highly depends on the amount of wave energy remaining at their lee side, the accurate prediction of the energy in the lee of such structures is of utmost importance. Past experiments have shown that the...
conference paper 2010
document
Guerrero, J.M. (author), Zlatanova, S. (author), Meijers, B.M. (author)
Underground pipelines pose numerous challenges to 3D visualization. Pipes and cables are conceptually simple and narrow objects with clearly defined shapes, spanned over large geographical areas and made of multiple segments. Pipes are usually maintained as linear objects in the databases. However, the visualization of lines in 3D is difficult...
conference paper 2013
document
Mohd Hanafi, Faraliyana (author), Hassan, Muhammad Imzan (author), Rashidan, Hanis (author), Abdul Rahman, Alias (author)
Owing to population growth in Malaysia, there have been significant stratified subsurface and aboveground developments, particularly in densely populated areas, posing a challenge to the current land administration system and the urge to constantly improve. Land Administration Domain Model (LADM) provides a relatively generic spatial...
conference paper 2022
document
Isikdag, Umit (author), Horhammer, Mike (author), Zlatanova, Sisi (author), Kathmann, Ruud (author), van Oosterom, Peter (author)
Valuation of real estate/ properties is in many countries/ cities the basis for fair taxation. The value depends on many aspects, including the physical real world aspects (geometries, material of object as build) and legal/virtual aspects (rights, restrictions, responsibilities, zoning/development plans applicable to the objects spaces)....
conference paper 2014
Searched for: subject%3A%223D%255C+modelling%22
(1 - 20 of 86)

Pages