Searched for: subject:"Adhesive%5C%2Bbonding"
(1 - 20 of 39)

Pages

document
Wang, W. (author), Poulis, J.A. (author), Teixeira De Freitas, S. (author), Zarouchas, D. (author)
Adhesive bonding is a highly desirable joining technique to join composites to metals. The surfaces of both composite and metal substrates have to be carefully treated before bonding them together, in order to avoid interface failure between the adherend's surface and adhesive. This paper describes the surface pretreatments on carbon fiber...
conference paper 2020
document
Kupski, J.A. (author), Teixeira De Freitas, S. (author), Zarouchas, D. (author), Benedictus, R. (author)
The goal of this study is to investigate new designs of composite bonded joints in order to improve their strength under tensile loading. Multiple stacked overlaps are compared with single overlap designs. The concept of multiple stacking is well known as ply-interleaving technique for co-curing dissimilar materials. For a secondary bonding...
conference paper 2019
document
Pascoe, J.A. (author), Zarouchas, D. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
Current methods for prediction of fatigue crack growth are based on empirical correlations which do not take the crack growth behaviour within a single cycle into account. To improve these prediction methods, more understanding of the physical mechanisms of crack growth is required. In this research the acoustic emission technique was used to...
journal article 2018
document
Lavalette, N.P. (author), Bergsma, O.K. (author), Zarouchas, D. (author), Benedictus, R. (author)
In the context of lightweight structure design for the transportation and robotics industries, new types of composite structures are being developed, in the form of trusses made of fiber-reinforced polymer composite members of small diameter. The main objective of this work is to study adhesive joints, bonding pultruded composite tubes inside...
conference paper 2018
document
Moreira Arouche, M. (author), Budhe, S. (author), Alves, L. A. (author), Teixeira De Freitas, S. (author), Banea, M.D. (author), de Barros, S. (author)
In this work, an experimental study has been carried out to evaluate the effect of salt water condition on the long-term adhesion of composite-to-metal bonded joints using peel tests. A new test configuration is tested via fully and partially immersed specimens with 500 mm length. Fracture surfaces of non-aged samples exhibited a cohesive...
journal article 2018
document
Usman, M. (author), Pascoe, J.A. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
The effect of temperature on fatigue crack growth in epoxy adhesive bonds was investigated for a range of temperatures from -55 to 80[U+202F]°C. The fatigue crack growth behaviour was characterised using both strain energy release rate (SERR) and by measurements of energy dissipation. It was found that for a given maximum SERR, or a given...
journal article 2018
document
Severijns, C. (author), Teixeira De Freitas, S. (author), Poulis, J.A. (author)
The curing behaviour and the mechanical behaviour of susceptor-assisted induction-cured adhesively bonded joints has been investigated. Induction Heating (IH) was established by mixing Iron particles into a two component epoxy paste adhesive. The effect of different process parameters, such as particle content, coupling distance and coil...
journal article 2017
document
Teixeira De Freitas, S. (author), Sinke, J. (author)
The aim of this research is to analyse the failure of a Fiber Metal Laminate (FML) skin adhesively bonded to a Carbon Fiber Reinforced Polymer (CFRP) stiffener, under quasi-static loading at different environmental temperatures (−55 °C, Room Temperature RT and +100 °C) and under fatigue loading at RT. This bonded joint was tested using...
journal article 2017
document
Abrahami, S.T. (author), de Kok, John M.M. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
For more than six decades, chromic acid anodizing (CAA) has been the central process in the surface pre-treatment of aluminum for adhesively bonded aircraft structures. Unfortunately, this electrolyte contains hexavalent chromium (Cr(VI)), a compound known for its toxicity and carcinogenic properties. To comply with the new strict...
journal article 2017
document
Abrahami, S.T. (author)
For more than six decades, chromic acid anodizing (CAA) has been the central process in the surface pre-treatment of aluminium for adhesively bonded aircraft structures in Europe. Unfortunately, this electrolyte contains hexavalent chromium (Cr(VI)), a compound known for its toxicity and carcinogenic properties. The approaching ban on the use of...
doctoral thesis 2016
document
Pascoe, J.A. (author)
doctoral thesis 2016
document
Jiang, X. (author), Qiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
The research presented in this paper is an experimental study and numerical analysis on mechanical behavior of the adhesively-bonded joint between FRP sandwich bridge deck and steel girder. Generally, there are three typical stress states in the adhesively-bonded joint: shear stress, tensile stress, and combination of both. To realize these...
journal article 2016
document
Papadakis, V. (author), Teixeira De Freitas, S. (author), Colijn, R.M. (author), Goedhart, J.J. (author), Poulis, J.A. (author), Groves, R.M. (author)
The adhesion process of bonded structures is a very sensitive manufacturing process, namely to surface contaminations. Nowadays, the adhesion quality of bonded joints can only be detected by destructive testing such as peel tests. But, for actual structures destructive testing of every bonded part is obviously not an option and industry is...
conference paper 2016
document
Pascoe, J.A. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
Measurement of the energy dissipation during fatigue crack growth is used as a technique to gain more insight into the physics of the crack growth process. It is shown that the amount of energy dissipation required per unit of crack growth is determined by Gmax, whereas the total amount of energy available for crack growth in a single cycle is...
conference paper 2016
document
Pascoe, J.A. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
The available models for the prediction of fatigue crack growth in adhesive bonds rely on the similitude principle. In most cases, one of three similitude parameters based on the strain energy release rate (SERR) is used; i.e. G<sub>max</sub>, (Δ√G)<sup>2</sup>, or ΔG. In all cases it is usually observed that keeping the similitude parameter...
journal article 2016
document
Li, C. (author), Rans, C.D. (author), LaPlante, G. (author), Marsden, C. (author)
conference paper 2015
document
Teixeira De Freitas, S. (author), Sinke, J. (author)
The purpose of this research is to study the effect of temperature on the static behavior of an hybrid structure consisting of adhesively bonded Fiber Metal Laminate skin to a composite stiffener. This hybrid structure was tested using stiffener pull-off tests, which is a typical set-up used to simulate the structural behaviour of full-scale...
conference paper 2015
document
Priesnitz, K. (author)
For many joining applications, adhesive bonding is the favoured method. It provides the ability to join dissimilar materials such as metals and plastics. Adhesive bonds can be formed over large flange areas subsequently increasing the overall stiffness of the assembly. In some cases, however, the bonding process can lead to distortions, i.e....
doctoral thesis 2015
document
Akram, M. (author)
Major industrial sectors like automotive, aerospace and others are increasingly using polymer composites in their structural parts. Polyimide sheet and adhesives, are high performance polymers. They are widely used in various engineering applications due to their excellent thermal, mechanical and chemical properties and their resistance to...
doctoral thesis 2015
document
Liu, X. (author), Tzimiris, G. (author), Li, J. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...
conference paper 2015
Searched for: subject:"Adhesive%5C%2Bbonding"
(1 - 20 of 39)

Pages