Searched for: subject:"Adhesives"
(1 - 20 of 30)

Pages

document
Lavalette, N.P. (author), Bergsma, O.K. (author), Zarouchas, D. (author), Benedictus, R. (author)
In the context of lightweight structure design for the transportation and robotics industries, new types of composite structures are being developed, in the form of trusses made of fiber-reinforced polymer composite members of small diameter. The main objective of this work is to study adhesive joints, bonding pultruded composite tubes inside...
conference paper 2018
document
Cui, Z. (author), Chen, Xianping (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Interfacial properties of Cu/SiO2 in semiconductor devices has continued to be the subject of challenging study for many years because of its difficulties in experimentally quantifying the critical strength of interface. In this paper, a multi-scale modeling approach is built to characterize the interfacial properties between Cu and SiO2. In...
conference paper 2018
document
Cui, Z. (author), Zhang, Yingying (author), Yang, Qun (author), Zhang, G.Q. (author), Chen, Xianping (author)
Interfacial properties of Cu/SiO<sub>2</sub> in semiconductor devices has been a challenging study for many years because of its difficulties in experimentally quantifying the critical strength of interface. In this paper, a multi-scale modeling approach is built to characterize the interfacial properties between Cu and SiO<sub>2</sub>. The...
conference paper 2018
document
Oikonomopoulou, F. (author), van den Broek, E.A.M. (author), Bristogianni, T. (author), Veer, F.A. (author), Nijsse, R. (author)
conference paper 2017
document
Joshi, S. (author), Bagani, R. (author), Beckers, Lucas (author), Dekker, R. (author)
This paper reports the use of rubber—Polybutadiene as an intermediate adhesive layer for improving the adhesion between polyimide (PI) and silicone polydimethylsiloxane (PDMS) which is required for a reliable fabrication of flexible/stretchable body patches for various applications. The adhesive bond initiated by the butyl rubber (BR), apart...
conference paper 2017
document
Oikonomopoulou, F. (author), Bristogianni, T. (author), Veer, F.A. (author), Nijsse, R. (author)
In this paper a bundled glass column is presented as a promising solution for a completely transparent, almost dematerialized structural compressive element. The aim is to ob-tain a glass column that can safely carry loads, achieve a high visual result and be relatively eas-ily manufactured. Different types of adhesives, rod configurations and...
conference paper 2016
document
Papadakis, V. (author), Teixeira De Freitas, S. (author), Colijn, R.M. (author), Goedhart, J.J. (author), Poulis, J.A. (author), Groves, R.M. (author)
The adhesion process of bonded structures is a very sensitive manufacturing process, namely to surface contaminations. Nowadays, the adhesion quality of bonded joints can only be detected by destructive testing such as peel tests. But, for actual structures destructive testing of every bonded part is obviously not an option and industry is...
conference paper 2016
document
de Barros, S. (author), Teixeira De Freitas, S. (author), Banea, M.D. (author), Budhe, S. (author), Arouche, M.M. (author), dos Santos, B.L. (author)
In this work, peel tests were used to assess the adhesion quality between carbon fiber reinforced polymers (CFRP) and carbon steel plates. The tests were performed according to the ASTM standard of floating roller peel tests (D3167–97) with a new specimen layup. The layup and geometry of specimens was defined in order to have the CFRP as the...
conference paper 2016
document
Pascoe, J.A. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
Measurement of the energy dissipation during fatigue crack growth is used as a technique to gain more insight into the physics of the crack growth process. It is shown that the amount of energy dissipation required per unit of crack growth is determined by Gmax, whereas the total amount of energy available for crack growth in a single cycle is...
conference paper 2016
document
Li, C. (author), Rans, C.D. (author), LaPlante, G. (author), Marsden, C. (author)
conference paper 2015
document
Teixeira De Freitas, S. (author), Sinke, J. (author)
The purpose of this research is to study the effect of temperature on the static behavior of an hybrid structure consisting of adhesively bonded Fiber Metal Laminate skin to a composite stiffener. This hybrid structure was tested using stiffener pull-off tests, which is a typical set-up used to simulate the structural behaviour of full-scale...
conference paper 2015
document
Liu, X. (author), Tzimiris, G. (author), Li, J. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...
conference paper 2015
document
Miedema, S.A. (author)
conference paper 2015
document
Liu, X. (author), Tzimiris, G. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...
conference paper 2014
document
Lafont, U. (author), Van Zeijl, H. (author), Van der Zwaag, S. (author)
In this work, we investigate the formation of self-healing systems that are able to recover more than once more than one (mechanical or other physical) functionality. To this aim composites were created consisting of a polysulfide thermoset rubber matrix having intrinsic self-healing properties filled with thermally/electrically conductive...
conference paper 2013
document
Sordo, F. (author), Michaud, V. (author)
Supramolecular polymers gained a great success in the last years as self-healing materials and many different systems have been developed. These polymers combine the advantages of intrinsic and autonomic self-healing systems. In 2010, Montarnal et al. developed a class of epoxy-based hybrid networks that combine both chemical and supramolecular...
conference paper 2013
document
Luterbacher, R. (author), Bond, I.P. (author), Trask, R.S. (author)
Locally stiffened or ‘stringer’ - skin composite structures are extensively used for lightweight applications in the aerospace industry. Due to localised stiffening, stress concentrations arise which can initiate damage e.g. debonding or delamination, within the composite structure. Critically, this damage can propagate under fatigue loading...
conference paper 2013
document
Lafont, U.L. (author), Van Zeijl, H. (author), Van der Zwaag, S. (author)
In this work, we investigate the formation of self-healing systems that are able to recover more than once more than one (mechanical or other physical) functionality. To this aim composites were created consisting of a polysulfide thermoset rubber matrix having intrinsic self-healing properties filled with thermally/electrically conductive...
conference paper 2013
document
Deshmukh, Y.S. (author), Esteves, A.C.C. (author), De With, G. (author)
Supramolecular self assembling hydrogen bonded polymeric materials are of great importance due to its practical relevance. Well designed molecules based on these concepts can produce polymeric materials with “responsive” properties like self healing even in coating application. The reversible, non-covalent hydrogen bonding interactions are a...
conference paper 2013
document
Jiang, X. (author), Kolstein, M.H. (author), Bijlaard, F.S.K. (author)
Due to various advantages of Fibre-Reinforced Polymer (FRP) decks, the FRP to steel composite bridge system is being increasingly used in new bridge structures as well as rehabilitation projects for old bridges. This paper focuses on the mechanical behaviours and failure modes of the adhesively-bonded joins between FRP sandwich decks and steel...
conference paper 2013
Searched for: subject:"Adhesives"
(1 - 20 of 30)

Pages