The durability of adhesively joints in space structure during interplanetary exploration

Spacecrafts are subjected to very few mechanical loads but in the future with reusable spacecraft designed for interplanetary explorations and with the repetition of landing and take off, structures will be subjected to significant mechanical loads. The degradation due to space aging conditions, of the adhesive materials used as joints in space...

Promoting extrinsic bridging of adhesively-bonded CFRP joints through the adhesive layer architecture

Carbon fiber-reinforced polymers (CFRPs) have widely attracted the aerospace and automotive industries due to high stiffness and lightweight. Secondary adhesive bonding of CFRPs is a promising research field to fully explore their potential. However, multiple challenges have limited the further application of adhesively-bonded composite joints...

Surface pretreatments on CFRP and titanium for manufacturing adhesively bonded bi-material joints

Adhesive bonding is a highly desirable joining technique to join composites to metals. The surfaces of both composite and metal substrates have to be carefully treated before bonding them together, in order to avoid interface failure between the adherend's surface and adhesive. This paper describes the surface pretreatments on carbon fiber...

On the influence of overlap topology on tensile strength of composite bonded joints: A multistacking design

The goal of this study is to investigate new designs of composite bonded joints in order to improve their strength under tensile loading. Multiple stacked overlaps are compared with single overlap designs. The concept of multiple stacking is well known as ply-interleaving technique for co-curing dissimilar materials. For a secondary bonding...

Post peel test assessment of metal-metal bonded interface using hyperspectral imaging

The adhesion process of bonded structures is a very sensitive manufacturing process, namely to surface contaminations. Nowadays, the adhesion quality of bonded joints can only be detected by destructive testing such as peel tests. But, for actual structures destructive testing of every bonded part is obviously not an option and industry is...

Adhesion quality of steel-CFRP interface bonding

In this work, peel tests were used to assess the adhesion quality between carbon fiber reinforced polymers (CFRP) and carbon steel plates. The tests were performed according to the ASTM standard of floating roller peel tests (D3167–97) with a new specimen layup. The layup and geometry of specimens was defined in order to have the CFRP as the...

Temperature effect on the static behaviour of adhesively-bonded metal skin to composite stiffener

The purpose of this research is to study the effect of temperature on the static behavior of an hybrid structure consisting of adhesively bonded Fiber Metal Laminate skin to a composite stiffener. This hybrid structure was tested using stiffener pull-off tests, which is a typical set-up used to simulate the structural behaviour of full-scale...