Isolated propeller aeroacoustics at positive and negative thrust

Using propellers in negative thrust conditions can potentially result in many benefits, such as a steeper descent, a reduced landing run, reduced community noise, energy regeneration, etc. However, the aerodynamics and aeroacoustics of propellers in this regime are not well understood. This paper presents an aeroacoustic analysis of an isolated...

Leading edge erosion detection for a wind turbine blade using far-field aerodynamic noise

In this paper, the feasibility of using far-field acoustic measurements as a non-contact monitoring technique for wind turbine blade leading edge erosion is assessed. For this purpose, a DU96 W180 airfoil with several eroded leading edge configurations of different severities is experimentally investigated. The eroded leading edges are designed...

Assessment of Blade Element Momentum Theory-based engineering models for wind turbine rotors under uniform steady inflow

Blade Element Momentum Theory (BEMT) -based approaches provide 15%–20% inaccurate load predictions under uniform steady inflow. Inaccuracies were related to unclear aerodynamic mechanisms causing the Prandtl Tip-Root Loss (TRL) correction to fail at high Tip-Speed Ratio (TSR) and the ambiguous drag coefficient treatment under Stall Delay (SD)...

Wind turbine blade trailing edge crack detection based on airfoil aerodynamic noise: An experimental study

In recent years, with the development of the wind power industry and the increase in the number of wind turbines, the condition monitoring of blades and the detection of damage are increasingly important. In this work, a new non-contact damage-detection approach is experimentally investigated based on the measurement of airfoil aerodynamic noise...

Computational study of flow incidence effects on the aeroacoustics of low blade-tip Mach number propellers

This paper presents a computational study of flow incidence effects on the aeroacoustics of a propeller operating at low blade-tip Mach numbers. The numerical flow solution is obtained by using the Lattice-Boltzmann/Very Large Eddy Simulation method, while far-field noise is computed through the Ffowcs-Williams & Hawkings' acoustic...

Aeroacoustics of sawtooth trailing-edge serrations under aerodynamic loading

The impact of aerodynamic loading on a serrated trailing edge is studied experimentally. Aerodynamic and acoustic measurements are conducted on a sawtooth-shaped trailing edge, retrofitted to a flat plate featuring a trailing-edge flap, and placed at incidence to the free-stream flow. The turbulent flow across the trailing edge is inspected...

Acoustic wall treatments for wind tunnel aeroacoustic measurements

Sound absorbing porous materials are used to line a wind tunnel wall, in order to reduce reflections. However, the lining can have a detrimental effect on the acoustic measurements due to an increase in the noise radiated from the walls. In addition, the aerodynamic fidelity of the tunnel can be affected. In the present study, the influence...

Performance and noise prediction of low-Reynolds number propellers using the Lattice-Boltzmann method

This paper proposes a CFD/CAA-based approach to predict the aerodynamic performances and tonal/broadband noise radiation of low-Reynolds number propellers at engineering level. Broadband self-noise prediction of low-Reynolds number propellers is particularly challenging, due to the requirement for the employed computational method to emulate...

An experimental study on trailing edge crack detection for wind turbine blade using airfoil aerodynamic noise

Recent decades have witnessed more and more wind turbines (WTs) being installed onshore and offshore. Health condition monitoring for WTs structures and components is increasingly becoming a compelling concern for stable power output and operational safety of a wind farm [1]. Blade damages seem to occur with a higher probability ahead of other...

Applications of the Multilayer Porous Medium Modeling Approach for Noise Mitigation

Porous materials have been widely investigated as a mean for noise reduction. Numerical simulations can be used to investigate the physical mechanisms responsible for noise reduction; however, a correct modeling of the porous medium through an equivalent fluid model is essential to minimize the computational costs. This paper reports a...

Effects of yawed inflow on the aerodynamic and aeroacoustic performance of ducted wind turbines

Ducted Wind Turbines (DWTs) can be used for energy harvesting in urban areas where non-uniform inflows might be the cause of aerodynamic and acoustic performance degradation. For this reason, an aerodynamic and aeroacoustic analysis of DWTs in yawed inflow condition is performed for two duct geometries: a baseline commercial DWT model, DonQi®...

Numerical analysis of fan noise for the NOVA boundary-layer ingestion configuration

Aim of this paper is to investigate the effects of the turbulent flow developing over a fuselage on fan noise for BLI embedded propulsion systems. Such configurations can suffer from inlet flow distortions and ingestion of turbulence at the fan plane with consequent impact on both broadband and tonal fan noise. The analysis is performed on a...