Searched for: subject%3A%22Aluminum%255C%252Balloy%22
(1 - 4 of 4)
document
de Jonge, J.B. (author), Nederveen, A. (author), Tromp, P.J. (author)
Riveted specimens that are considered representative for F-27 type wing structure were subjected to comparative flight simululation test in which the gust load severity and Ground-Air-Ground cycle were systematically varied. The effect of these variations on crack propagation behaviour was studied by means of crack growth tests on 2 mm sheet...
report 1978
document
Schijve, J. (author), Jacobs, F.A. (author), Tromp, P.J. (author)
Flight-simulation tests based on a standardized gust load spectrum were carried out in normal air, very dry air and salt water. Specimen thicknesses were t = 2 mm and t = 10 mm, mean stress in flight was 70 or 55 MN/m². In all cases a significant effect of the environment was found. Fatigue lives for t = 10 ram were much shorter than for t = 2...
report 1976
document
Wanhill, R.J.H. (author), Schra, L. (author)
The effects of flat to slant fracture transitions on flight simulation fatigue crack propagation in specimens of 7O5O aluminium alloy forgings are discussed. For specimens containing flat, shearlipped, or full slant fractures at similar crack lengths the crack resistance (R curve) approach appears to provide an explanation for differences in the...
report 1976
document
't Hart, W.G.J. (author)
Residual strength tests have heen performed, on 300 mm wide centrecracked panels of various thicknesses, at room temperature and at -50 C. During the tests, stable crack growth was filmed and recorded with the electric potential method. Fracture toughness was determined using the method of Feddersen.
report 1976
Searched for: subject%3A%22Aluminum%255C%252Balloy%22
(1 - 4 of 4)