Searched for: subject%3A%22Annealing%22
(1 - 20 of 100)

Pages

document
Lebègue, J. (author), Delahaye, Daniel (author), Hoekstra, J.M. (author)
Many transportation networks have complex infrastructures (road, rail, airspace, etc.). The quality of service in air transportation depends on weather conditions. Technical failures of the aircraft, bad weather conditions, strike of the company’s staff cause delays and disrupt traffic. How can the robustness of such networks be improved?...
conference paper 2024
document
Vis, Floris (author)
The mining industry is a significant contributor to greenhouse gas emissions and operational costs. The transportation of materials within mining operations, especially using diesel-powered trucks, accounts for a substantial portion of both emissions and costs. Optimizing fuel consumption in this context is crucial for environmental...
master thesis 2023
document
DAUTEZAC, Alice (author)
The presence of retained austenite (RA) has been proven beneficial for the formability of Advanced High Strength Steels. Therefore, multiple thermal austenite stabilization methods have been researched, such as Mn-partitioning during intercritical annealing in medium Mn steels. The Cyclic Partial Phase Transformation (CPPT) approach has been...
master thesis 2023
document
WU, KANGJIE (author)
The research on sustainable energy is growing, among which, wind energy catching growing attention and the potential has been supported by more and more countries. Compared with onshore wind farms, offshore wind farms have more advantages including the abundant wind resource at the offshore location and more possible construction areas. While...
master thesis 2023
document
Kalpoe, Prashand (author)
The journey towards increasing thin film solar cell efficiency is a continuously ongoing one, where each layer in the cell adds its own contributions and limitations. The transparent conductive oxide (TCO) is the first layer to encounter incident light on these cells and therefore needs to fulfil the requirement of high transparency. Carriers...
master thesis 2023
document
Kuruganti, V.V. (author), Mazurov, Alexander (author), Seren, Sven (author), Isabella, O. (author), Mihailetchi, Valentin D. (author)
In this work, we developed an in situ annealing process to crystallize boron-doped amorphous silicon [a-Si(p+)] layers deposited by atmospheric pressure chemical vapour deposition (APCVD) to form boron-doped polycrystalline silicon [poly-Si(p+)] layers. The influence of the temperature profiles during a-Si(p+) inline deposition on structural,...
journal article 2023
document
Kozłowska, Aleksandra (author), Morawiec, Mateusz (author), Petrov, R.H. (author), Grajcar, Adam (author)
A novel double-step intercritical annealing (DSIA) process was conducted on Fe-0.16C-4.7Mn-1.6Al-0.2Si transformation induced plasticity (TRIP) steel. In a present study, an effect of different heating and cooling rates applied to the second intercritical annealing (IA) step on the microstructure was studied in detail by using scanning...
journal article 2023
document
Wils, K.A. (author), Chen, B. Y. (author)
With the advent of novel quantum computing technologies and the new possibilities thereby offered, a prime opportunity has presented itself to investigate the practical application of quantum computing. This work investigates the feasibility of using quantum annealing for structural optimization. The target problem is the discrete truss sizing...
journal article 2023
document
Yan, J. (author), Zhao, J. (author), Wang, H. (author), Kerklaan, Mels (author), Bannenberg, L.J. (author), Ibrahim, B. (author), Savenije, T.J. (author), Mazzarella, L. (author), Isabella, O. (author)
Multiple-source thermal evaporation is emerging as an excellent technique to obtain perovskite (PVK) materials for solar cell applications due to its solvent-free processing, accurate control of stoichiometric ratio, and potential for scalability. Nevertheless, the currently reported layer-by-layer deposition approach is afflicted by long...
review 2023
document
Zielinski, Sebastian (author), Gabor, Thomas (author), Nüßlein, Jonas (author), Linnhoff-Popien, Claudia (author), Stein, Jonas (author), Feld, S. (author)
To solve 3sat instances on quantum annealers they need to be transformed to an instance of Quadratic Unconstrained Binary Optimization (QUBO). When there are multiple transformations available, the question arises whether different transformations lead to differences in the obtained solution quality. Thus, in this paper we conduct an...
conference paper 2023
document
Zielinski, Sebastian (author), Nüßlein, Jonas (author), Stein, Jonas (author), Gabor, Thomas (author), Linnhoff-Popien, Claudia (author), Feld, S. (author)
One way of solving 3sat instances on a quantum computer is to transform the 3sat instances into instances of Quadratic Unconstrained Binary Optimizations (QUBOs), which can be used as an input for the QAOA algorithm on quantum gate systems or as an input for quantum annealers. This mapping is performed by a 3sat-to-QUBO transformation....
journal article 2023
document
Tejedor-Romero, Marino (author), Murukannaiah, P.K. (author), Gimenez-Guzman, Jose Manuel (author), Marsa-Maestre, Ivan (author), Jonker, C.M. (author)
Channel allocation in dense, decentralized Wi-Fi networks is a challenging due to the highly nonlinear solution space and the difficulty to estimate the opponent’s utility model. So far, only centralized or mediated approaches have succeeded in applying negotiation to this setting. We propose the first two fully-distributed negotiation...
conference paper 2023
document
Hesam Mahmoudi Nezhad, N. (author), Ghaffarian Niasar, M. (author), Hagen, C.W. (author), Kruit, P. (author)
To design electron lens systems, applying a fully automated optimization routine has not yet been feasible, especially for the case where the optimization has many free variables of the lens system, such as all parameters that define the geometry of the lens electrodes and the voltage of each electrode. Hence, the study of the implementation of...
conference paper 2023
document
Igea, Felipe (author), Cicirello, A. (author)
Multi-modal distributions of some physics-based model parameters are often encountered in engineering due to different situations such as a change in some environmental conditions, and the presence of some types of damage and non-linearity. In statistical model updating, for locally identifiable parameters, it can be anticipated that multi...
journal article 2023
document
Marcoen, Kristof (author), Gauvin, Mélanie (author), De Cleene, Ansbert (author), Obitsø Nielsen, Jacob (author), Baert, Kitty (author), Terryn, H.A. (author), De Strycker, Joost (author), Hauffman, Tom (author), Pantleon, Karen (author)
Electrodeposition from an environmentally friendly iron sulfate electrolyte with citric acid as carbon source has gained attention recently, because of excellent mechanical properties of the resulting Fe–C coatings with intentionally codeposited high-carbon concentrations. While being very attractive as protective coatings and sustainable...
journal article 2023
document
Tejedor Romero, M. (author), Murukannaiah, P.K. (author), Gimenez-Guzman, Jose Manuel (author), Marsa Maestre, I. (author), Jonker, C.M. (author)
Channel allocation in dense Wi-Fi networks is a complex problem due to its nonlinear and exponentially sized solution space. Negotiating over this domain is a challenge, since it is difficult to estimate opponent’s utility. Based on our previous work in mediated techniques, we propose the first two fully-distributed multi-agent negotiations...
conference paper 2023
document
Koniari, A.M. (author), Andriotis, C. (author), Oikonomopoulou, F. (author)
This work develops a computational method that produces algorithmically generated design forms, able to overcome inherent challenges related to the use of cast glass for the creation of monolithic structural components with light permeability. Structural Topology Optimization (TO) has a novel applicability potential, as decreased mass is...
conference paper 2023
document
van Duijvenbode, J.R. (author), Soleymani Shishvan, M. (author)
The results of dig limit delineation in open pit mining are never truly optimized due to gaps in the underlying data, such as insufficient sampling. Aside from the data uncertainty, there is also an influence on the final dig limit by either humans or by the heuristic character of an optimization method like simulated annealing. Several dig...
journal article 2022
document
van der Zalm, Joost (author)
One of the main components used in superconducting quantum chips is the Josephson junction. Currently when fabricating Josephson junctions, the resistance uniformity at wafer-scale is not optimal. It is also known that an annealing process can alter the junction resistance and with it the qubit frequency. However, laser annealing has only shown...
master thesis 2022
document
Bak, Marco (author)
In this paper, a Simulated Annealing (SA) implementation for a Flexible Job Shop Problem (FJSP), with change-over time, is presented. <br/> This implementation is compared to a Mixed Integer Linear Programming (MILP) optimization, to compare performances. <br/> The SA algorithm starts with creating the first schedule with Global Selection. <br/>...
bachelor thesis 2022
Searched for: subject%3A%22Annealing%22
(1 - 20 of 100)

Pages