Enhancement of Aeroacoustic Testing: Applied to closed-section wind tunnels

Aeroacoustic testing in wind tunnels is crucial for understanding and mitigating the noise generation mechanisms in several devices while maintaining satisfactory aerodynamic performance in the conceptual design stage. However, current measurements in closed-section wind tunnels face challenges in terms of installation, due to the effect of the...

Combining asynchronous microphone array measurements for enhanced acoustic imaging and volumetric source mapping

This paper explores the advantages of combining asynchronous microphone array measurements for acoustic source mapping in two and three–dimensional applications. Four different approaches are considered, three consisting of the combination of the source maps (arithmetic mean, geometric mean, and minimum value), and a fourth one obtained by...

Evaluation of the effect of microphone cavity geometries on acoustic imaging in wind tunnels

Aeroacoustic measurements performed by flush-mounted microphone arrays on the walls of closed-section wind tunnels are contaminated by the hydrodynamic pressure fluctuations of the wall's boundary layer. This study evaluates three different microphone cavity geometries for mitigating this issue. Their improvement to the signal-to-noise ratio ...

Assessment of the accuracy of microphone array methods for aeroacoustic measurements

In this paper, the performance of four acoustic imaging methods: conventional frequency domain beamforming (CFDBF), functional beamforming (FUNBF), enhanced high resolution CLEAN–SC (EHR–CLEAN–SC) and generalized inverse beamforming (GIBF), is investigated in terms of accuracy and variability. Three experimental test cases are considered: 1)...

Microphone arrays for imaging of aerospace noise sources

With the continuous growth in demand for air traffic and wind turbines, the noise emissions they generate are becoming an increasingly important issue. To reduce their noise levels, it is essential to obtain accurate information about all the sound sources present. Phased microphone arrays and acoustic imaging methods allow for the estimation of...

A study on the near-surface flow and acoustic emissions of trailing edge serrations: For the purpose of noise reduction of wind turbine blades

The flow near the surface, and the acoustic emissions of trailing edge serrations are investigated in this work. The use of this family of aerodynamic devices on airfoils is intended for the reduction of turbulent boundary layer-trailing edge noise (TBL-TE noise). This purpose has been well demonstrated in wind tunnel and numerical experiments....