Searched for: subject%3A%22Best%255C+worst%255C+method%22
(1 - 20 of 86)

Pages

document
Taets van Amerongen, Charlotte (author)
The aviation sector, responsible for approximately 2% of global anthropogenic greenhouse gas emissions, is projected to grow 4-6 times by 2050, conflicting with the European Union’s Green Deal target of achieving net-zero emissions by the same year. While aircraft electrification offers a promising solution, its application is largely limited to...
master thesis 2024
document
Gopalakrishnan, Aditya (author)
Corporate venturing practices have been one of the most successful practices in terms of shared innovation or leveraging outside talent to further one’s competitive edge in the rapidly growing and evolving industry of technology. Since, technology has been one of the main driving factors in providing solutions for achievement of short term and...
master thesis 2024
document
Vaandrager, Celine (author)
This thesis addresses the increasing vulnerabilities in modern supply chains, particularly within the maritime industry. Emphasizing the crucial role of procurement in risk mitigation, the study challenges conventional lean management, advocating for agile supply chain strategies. It introduces the Integrated Supplier Matrix (ISM) to enhance...
master thesis 2024
document
Wu, W. (author), Liu, Xinwang (author), Zhou, Ligang (author), Qin, Jindong (author), Rezaei, J. (author)
Since the development of the best–worst method (BWM) in 2015, it has become a popular research focus in multi-criteria decision-making. The original optimization problem of the BWM is a nonlinear min–max model that can lead to multiple optimal solutions, while the linear model of the BWM produces a unique solution. The two models need to be...
journal article 2024
document
Corrente, Salvatore (author), Greco, Salvatore (author), Rezaei, J. (author)
Despite its recent introduction in literature, the Best–Worst Method (BWM) is among the most well-known and applied methods in Multicriteria Decision-Making. The method can be used to elicit the relative importance (weight) of the criteria as well as to get the priorities of the alternatives on the criteria at hand. In this paper, we will...
journal article 2024
document
Aydin, Mustafa (author)
In the contemporary global environment, supply chains are increasingly vulnerable to disruptions, with environmental and supplier disturbances posing frequent challenges. This research aimed to understand the influence of a systematic supplier selection approach, combined with an effective risk mitigation strategy, on supply chain performance...
master thesis 2023
document
Thati, Chandusha (author)
This thesis presents a comprehensive study on the development of a maturity model for dryports. Through an extensive literature review, key functions and requirements of dryports were identified, providing a foundational understanding for subsequent research. To validate and enhance the identified functions, a stakeholder analysis was conducted...
master thesis 2023
document
Hofste, Pim (author)
The use of petroleum-based fuels in the shipping sector creates harmful emissions that need to be reduced to reach climate goals. Ammonia is being considered as a possible fuel to reduce emissions, but there exist several challenges that prevent its implementation. Research into these several of these challenges is being done, but there is...
master thesis 2023
document
Kheybari, Siamak (author), Davoodi Monfared, Mansoor (author), Salamirad, Amirhossein (author), Rezaei, J. (author)
To design a bioethanol supply chain, along with the transportation and operational costs, it is vital to consider more factors categorized into three sustainability pillars (i.e. economy, social and environment). In this paper, to develop a mathematical model for bioethanol supply chain (BSC), we propose a two-phase methodology; in the first...
journal article 2023
document
Rietveld, Mike (author), van Dijk, Jolijn (author), Gülüm Taş, P. (author)
Strategic investments are crucial for software companies as they determine the direction and growth of the businesses. Parallel to continuous improvements in information technologies, increased customer expectations, and competitive environments, deciding between new investment strategies has become even more important. Despite their prevalence,...
journal article 2023
document
van Haersma Buma, Bernhard N.D. (author), Peretto, Marco (author), Matar, Ziad M. (author), van de Kaa, G. (author)
This paper focuses on the battle for a dominant design for renewable hydrogen electrolysis in which the designs, alkaline and proton exchange membrane, compete for dominance. First, a literature review is performed to determine the most relevant factors that influence technology dominance. Following that, a Best Worst Method analysis is...
journal article 2023
document
Hoogerbrugge, Coen (author), van de Kaa, G. (author), Chappin, E.J.L. (author)
This paper studies factors for the adoption of quality standards. The identified factors are applied to a typical example of such a standard; a new standardized measurement and calculation methodology for corporate greenhouse gas inventories. Standardization of these methodologies fosters innovation, as it will provide innovators and regulators...
journal article 2023
document
Biemans, Angelique (author)
master thesis 2022
document
Schoneveld, Martijn (author)
Port performance is under pressure due to high congestion levels and a need to reduce GHG emissions. The industry is looking for ways to increase efficiency in ports. A promising concept is known as port call optimization where waiting times and turn-around times can be reduced. This research contributes to the body of port call optimization...
master thesis 2022
document
de Haas, Victor (author)
The airline industry is growing and so are its emissions. To diminish the airline industry's increasing emissions, carbon-neutral growth for this industry is adopted. Sustainable aviation fuels (SAF) are considered an important aspect to comply with these goals and a large upscale of the SAF industry is needed. Therefore, the European Commission...
master thesis 2022
document
van Belzen, Dieko (author)
In the past decades, sustainability has become increasingly important for the construction industry, in particular highway infrastructure, as it can generate both positive and negative impacts on the social and physical environment. As a result of the impact on the environment and the growing awareness of environmental protection, the effects on...
master thesis 2022
document
Batenburg, Leonard (author)
The concrete armour unit industry exist for more than 70 years, in this period various units were developed. The first units derived their hydraulic stability on their own weight, later the units got more complex shapes and got interlocking capabilities. The first interlocking units were placed in a two-layer configuration, like Tetrapod and...
master thesis 2022
document
Liang, F. (author), Brunelli, Matteo (author), Rezaei, J. (author)
This study aims to develop a Multi-Attribute Decision-Making (MADM) method, the Best-Worst Tradeoff method, which draws on the underlying principles of two popular MADM methods (the Best-Worst Method (BWM) and the Tradeoff). The traditional Tradeoff procedure, which is based on the axiomatic foundation of multi-attribute value theory, considers...
journal article 2022
document
Liang, Yingying (author), Ju, Yanbing (author), Tu, Yan (author), Rezaei, J. (author)
The best-worst method (BWM) is a multicriteria decision-making (MCDM) method to derive the relative importance (weight) of a set of criteria used to evaluate a set of alternatives. Several models (e.g., nonlinear, linear, Bayesian, and multiplicative) have been developed to find the weights based on the provided pairwise comparisons, conducted...
journal article 2022
document
Rezaei, J. (author), Arab, Alireza (author), Mehregan, Mohammadreza (author)
In this study, the existence of anchoring bias—people's tendency to rely on, evaluate, and decide based on the first piece of information they receive—is examined in two multi-attribute decision-making (MADM) methods, simple multi-attribute rating technique (SMART), and Swing. Data were collected from university students for a transportation...
journal article 2022
Searched for: subject%3A%22Best%255C+worst%255C+method%22
(1 - 20 of 86)

Pages