Searched for: subject:"Bonding%5C+strength"
(1 - 13 of 13)
document
Chen, Y. (author), Jansen, K. (author), Zhang, H. (author), Romero Rodriguez, C. (author), Gan, Y. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author)
For a single batch material, time intervals and nozzle standoff distances between two subsequent layers are two critical printing parameters that influence the mechanical performance of the printed concrete. This paper presents an experimental and numerical study to investigate the impacts of these printing parameters on the interlayer bond...
journal article 2020
document
Liu, X. (author), Kasbergen, C. (author), Li, J (author), Scarpas, Athanasios (author), Tzimiris, G. (author)
The adhesive bonding strength of the membrane layers between the asphalt concrete surface layers and the decks of steel bridges has a strong influence on the fatigue life of orthotropic steel deck bridges (OSDBs). The interfacial properties between the membrane and the layers bonded to it have not been extensively studied in the current...
journal article 2020
document
Liu, X. (author), Kasbergen, C. (author), Li, J (author), Scarpas, Athanasios (author)
The adhesive bonding strength of the membrane layers between the asphalt concrete surface layers and the decks of steel bridges has a strong influence on the fatigue life of orthotropic steel deck bridges (OSDBs). The most important requirement for the application of membrane materials to orthotropic steel deck bridges is that the membrane...
journal article 2020
document
Panda, Biranchi (author), Noor Mohamed, Nisar Ahamed (author), Chandra Paul, Suvash (author), Bhagath Singh, GVP (author), Tan, Ming Jen (author), Šavija, B. (author)
The advent of digital concrete fabrication calls for advancing our understanding of the interaction of 3D printing with material rheology and print parameters, in addition to developing new measurement and control techniques. Thixotropy is the main challenge associated with printable material, which offers high yield strength and low viscosity....
journal article 2019
document
Paknahad, A. (author), Petre, Daniela G. (author), Leeuwenburgh, Sander C.G. (author), Sluys, Lambertus J. (author)
Because of their chemical similarity to the mineral phase of bone and teeth, calcium phosphate cements (CPCs) are extensively investigated for applications in biomedicine. Nevertheless, their applicability in load-bearing anatomical sites is restricted by their brittleness. Reinforcement of calcium phosphate cements with polymeric fibers can...
journal article 2019
document
Lopez-Covaleda, Edwin A. (author), Ghodrat, S. (author), Kestens, L.A.I. (author), Sacre, Charles Henry (author), Pardoen, Thomas (author)
Compacted graphite iron is the material of choice for engine cylinder heads of heavy-duty trucks. Compacted graphite iron provides the best possible compromise between optimum mechanical properties, compared to flake graphite iron, and optimum thermal conductivity, compared to spheroidal graphite iron. The vermicular-shaped graphite particles...
journal article 2018
document
Leegwater, G.A. (author), Scarpas, Athanasios (author), Erkens, S. (author)
Asphalt concrete has the advantageous ability to heal. During rest<br/>periods, damage present In the material is restored to a certain extent.<br/>Healing of the material can be observed in iis regaining of strength<br/>and stiffness after rest periods. In this paper, a new test method is presented.<br/>It was developed to increase the...
journal article 2016
document
Liu, X. (author), Tzimiris, G. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...
conference paper 2014
document
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) are introduced. Analytical constitutive relations of the MAT device have been derived using the same...
conference paper 2013
document
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author)
In order to characterize adequately the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) have been introduced. Analytical constitutive relations of MAT device have been derived on the basis of...
conference paper 2012
document
Zhou, J. (author)
Background and goals of this thesis The concrete repair, rehabilitation and retrofitting industry grows rapidly, driven by deterioration of, damage to and defects in concrete structures. However, it is well known that to achieve durable concrete repairs is very difficult. The failure of concrete repairs causes high economical, social and...
doctoral thesis 2011
document
Groot, C. (author), Larbi, J. (author)
Water loss from the fresh mortar is believed to be related to mortar-brick bond strength development in masonry. Recent research on mortar-brick bond has shown that, particularly, effects of water flow on the composition and the hydration conditions of the mortar-brick interface have to be taken into account to explain bond strength development....
journal article 1999
document
Reinhardt, H.W. (author)
Uniaxial impact tensile tests on plain concrete were carried out with the aid of Split Hopkinson Bar equipment with stress rates of up to 60000 N/mm2. s. Various concrete mixes were investigated under. dry and wet conditions. All the concretes showed an increase in strength with increasing stress rate. At very high stress rates the strength may...
journal article 1982
Searched for: subject:"Bonding%5C+strength"
(1 - 13 of 13)