- document
-
Spyridonos, George (author)Due to its immense potential to harvest larger amounts of energy from the wind at a higher capacity factor, offshore wind energy is the key to reach the goal of a more sustainable future. The wind energy research community has been focusing all its efforts to bring the new concept of floating offshore wind turbines (FOWT) into the market. By...master thesis 2023
- document
-
Kaniewski, Tadeusz (author)The computational cost of high-fidelity engineering simulations, for example CFD, is prohibitive if the application requires frequent design iterations or even fully fledged optimization. A popular way to reduce the computational cost and enable fast iteration cycles is to use surrogate models that are trained to predict simulation results from...master thesis 2023
- document
-
Lokken, Thomas (author)With an increased demand for renewable energy wind farms, their efficiency receives growing attention from both the industry and academics. Mitigating wake interaction effects in wind farms is one of the ways wind farms could increase their efficiency. Control techniques to increase wake reenergizing are currently under development, however, are...master thesis 2023
- document
-
Bianchi, Francesco (author)In this report a master thesis work in support to the development of a water-based Vaporizing Liquid Microthruster (VLM) is presented. This device, which makes use of MEMS technology to offer a very high degree of miniaturization, is an extremely compact thruster which achieves an important performance (Isp > 100 s [64]) while utilizing water...master thesis 2023
- document
-
van Luijk, Nikki (author)The Flying V is a flying wing aircraft consisting of two pressurised passenger cabins placed in a V shape. Its longitudinal and lateral control is ensured via elevons and split flaps on the outboard wing, and rudders on the tip-mounted winglets. The goal of this study is to devise a design for the outboard wing of the Flying V through a...master thesis 2023
- document
-
Tallapragada, Bharadwaj (author)A popular class of methods for solving Fluid-Structure Interactions (FSI) problems computationally are the moving mesh deformation methods. These methods generally involve deforming the fluid domain so that it conforms to the structure as it undergoes changes. An efficient and robust moving mesh technique involves interpolation of displacements...master thesis 2023
- document
-
Lovato, S. (author)The increasing size of today's ships is a major concern for navigation in confined waters. In order to ensure safe manoeuvres, port authorities prescribe, among others, a minimum under-keel clearance that must be maintained by the ships during navigation.<br/>However, the seabed of ports situated at the estuaries or along rivers is often covered...doctoral thesis 2023
- document
-
Trotta, Luca (author)High-frequency combustion instabilities represent the main technical risk faced by design engineers when developing new chemical rocket propulsion systems. Such instabilities are driven by the coupling between the flames’ heat release rate and the combustion chamber’s acoustic field. As such, they can only be assessed during detailed design...master thesis 2023
- document
-
Krol, Robert (author)Silicon based power semiconductors have long been used as the standard in ‘semiconductor technology in power conversion applications’. Recent developments replaces the Silicon with Silicon Carbide as it results in superior performance of the power conversion applications. However, due to the increased performance, challenges...master thesis 2023
- document
-
van der Made, Daan (author)In this thesis, the influence of a combined drift angle, heeling angle and forward speed on the stability of a tug is researched. This is done to gain insight in the stability of tugs during escorting, where they operate at high drift angles, heeling angles and forward speed. The Damen RSD 2513 tug was simulated in steady CFD simulation using...master thesis 2023
- document
-
Martorelli, Luca (author)The use of CFD-based optimizations is becoming a standard for turbomachinery design. Although the use of such optimizations can lead to great improvements of the machine performances, there are still several shortcomings in the common design procedure of turbomachines. In fact, this entails the optimization of the component shape, and only a...master thesis 2023
- document
-
Nijssen, T.M.J. (author), Ottens, M. (author), Padding, J.T. (author)Lubrication forces play a major role in the behaviour of fluid–solid systems, where they affect the collisions between particles. Current implementations of lubrication forces in unresolved simulations often suffer from shortcomings, such as neglecting parts of the physics or relying on arbitrarily defined parameters. In this short...journal article 2023
- document
-
Mata, Marisol Irías (author), van Gent, M.R.A. (author)Numerical modelling of wave interaction with rock-armoured rubble mound breakwaters has been performed to study wave overtopping. The influences of the slope angle, a berm in the seaward slope, a protruding crest wall, a recurved parapet, and the wave steepness have been studied using a validated CFD model (OpenFOAM). The numerical modelling...journal article 2023
- document
-
Wang, J. (author), Yan, Xin ping (author), Boersma, B.J. (author), Lu, Ming jian (author), Liu, Xiaohua (author)Printed circuit heat exchangers (PCHE) are designed to improve heat recovery and energy saving in supercritical CO<sub>2</sub> (S-CO<sub>2</sub>) power cycles. In the current study, a modified channel PCHE is proposed based on the regular straight channel and a zigzag channel. The thermal–hydraulic performance of four different types of PCHE...journal article 2023
- document
-
van der Eijk, M. (author), Wellens, P.R. (author)The numerical prediction of two-phase flows with an interface is challenging, to a considerable extent because of the high density ratio at the interface. Numerical results become affected by momentum losses, diverging spurious interface velocities, free surface distortion, and even numerical instability. To prevent issues like these,...journal article 2023
- document
-
Perinajová, R. (author), van Ooij, Pim (author), Kenjeres, S. (author)A long-time exposure to lack of oxygen (hypoxia) in some regions of the cerebrovascular system is believed to be one of the causes of cerebral neurological diseases. In the present study, we show how a combination of magnetic resonance imaging (MRI) and computational fluid dynamics (CFD) can provide a noninvasive alternative for studying...journal article 2023
- document
-
Begall, Moritz J. (author), Schweidtmann, A.M. (author), Mhamdi, Adel (author), Mitsos, Alexander (author)Computational Fluid Dynamics (CFD) is a powerful tool which can help with the geometry optimization of continuous milli-scale reactors, which often are highly complex devices. Attempting to perform this optimization by manually modifying and testing geometry configurations can however be tedious and computationally inefficient. Addressing...journal article 2023
- document
-
Zou, P. (author), Ruiter, N. (author), Bricker, J.D. (author), Uijttewaal, W.S.J. (author)The effects of surface roughness as induced by marine fouling on the hydrodynamic forces on a submerged floating tunnel (SFT) are experimentally and numerically investigated in detail at Reynolds numbers Re = 8.125 × 10<sup>3</sup>–5.25 × 10<sup>4</sup>. A sensitivity analysis to different roughness parameters including roughness height,...journal article 2023
- document
-
Hosseini, A. (author), Hage, Johannes (author), Meijer, Koen (author), Offerman, S.E. (author), Yang, Y. (author)In this paper a CFD analysis of HIsarna off-gas system for post combustion of CO-H2-carbon particle mixture is presented to evaluate the effect of different sub-models and parameters on the accuracy of predictions and simulation time. The effects of different mesh type, mesh grid size, radiation models, turbulent models, kinetic mechanism,...journal article 2023
- document
-
Muscari, C. (author), Giordani, R. (author), Schito, P. (author)In this work we test a Fluid–Structure Interaction (FSI) method based on the SOWFA+ OpenFAST framework. The linear structural module of FAST is coupled to SOWFA's Actuator Line simulations to perform the aeroelastic analysis of a wind tunnel scaled model (1:75) of the DTU 10 MW turbine. The objective is to give a quantitative description of...journal article 2023