Searched for: subject%3A%22Characteristics%22
(1 - 20 of 242)

Pages

document
Nyamsangya, Trevor (author)
In Low and Middle-Income Countries (LMICs), a significant challenge lies in the misalignment between available medical equipment and the specific needs of these regions. For example the needs of being adapted to low resource settings. A lot of medical equipment is not adapted to be operated in low-resource settings. This situation has prompted a...
master thesis 2023
document
Smeenge, Margo (author)
During adaptive re-use of heritage obejcts, experiential value of characteristics is often overlooked. This project highlights the importance of the effect of architecture on the psyche and how integrating this into the value assessment, a more holistic heritage approach can be realised. Religious heritage often has the capacity to astonish,...
master thesis 2023
document
Hu, Willy (author)
Flying characteristics of a multi-engined light general aviation (GA) aircraft during and after an engine failure is often a major safety consideration when both designing and operating the aircraft. In the meantime, the propellers, being large rotating masses, can exert considerable gyroscopic effect on the aircraft during flight, itself...
master thesis 2023
document
Zhang, Qing (author)
Nowadays, accurate vehicle classification plays a critical role in Advanced Driver Assistant Systems (ADASs), autonomous driving systems, and traffic monitoring systems. The benefits of utilizing additional polarimetric information in road target classification have been revealed in the literature. This thesis investigates the polarimetric...
master thesis 2023
document
Vroom, Anika (author)
This thesis explores the application of Distributed Temperature Sensing (DTS) technology to observe temperature gradients and turbulent eddies within and above a forest vegetation layer. Atmospheric temperature gradients tie directly to heat transfer, a primary mode of which are turbulent eddies. The goal in studying these elements is to enhance...
master thesis 2023
document
Criel, Matthias (author)
Thin-film silicon technology creates electricity out of micrometer thick silicon absorber layers, which makes this technology less material heavy compared to classic crystalline technology. This advantage can be further exploited with the transition towards flexible thin-film technology, where the non-modular cost can be further reduced compared...
master thesis 2023
document
Schuurman, Kevin (author)
The use of deep learning in global weather forecasting has shown significant promise in improving both forecasting accuracy and speed. Traditional numerical weather prediction models have gradually improved forecasting skills but at the cost of increased computational complexity. In contrast, new deep learning models, trained directly on...
master thesis 2023
document
van Vliet, Sjoerd (author)
Different paradigms can be used to evoke brainwaves. These brainwaves can be interpreted as commands that can be used to control different applications. These frameworks that interpret the brainwaves are called brain-computer interfaces. Steady-state visually evoked potentials is one of these paradigms that uses external stimuli flickering at...
master thesis 2023
document
Chandra, D. (author), Bakshi, Tuli (author), Bahadur, Jitendra (author), Hazra, Bodhisatwa (author), Vishal, Vikram (author), Kumar, Shubham (author), Sen, Debasis (author), Singh, T. N. (author)
A combination of high-resolution imaging, low-pressure gas adsorption, and small-angle X-ray and neutron scattering quantifies changes in the pore characteristics of pulverized shale samples under oxic and anoxic environments up to 300 ℃. Clay-rich early-mature shales have a fair potential to generate hydrocarbons, the total organic carbon...
journal article 2023
document
Kola, I. (author), Jonker, C.M. (author), Riemsdijk, M. Birna van (author)
Support agents that help users in their daily lives need to take into account not only the user’s characteristics, but also the social situation of the user. Existing work on including social context uses some type of situation cue as an input to information processing techniques in order to assess the expected behavior of the user. However,...
journal article 2023
document
Foss, Ollie (author), Blenkinsopp, Chris E. (author), Bayle, P.B. (author), Martins, Kévin (author), Schimmels, Stefan (author), Almeida, Luis Pedro (author)
Pressure on the coastline is escalating due to the impacts of climate change, this is leading to a rise in sea-levels and intensifying storminess. Consequently, many regions of the coast are at increased risk of erosion and flooding. Therefore coastal protection schemes will increase in cost and scale. In response there is a growing use of...
journal article 2023
document
Dong, Yicong (author), Dowling, K.M. (author), Ghandiparsi, Soroush (author), Voss, Lars (author), Rakheja, Shaloo (author)
In this work, we demonstrate and model the deep-level defect physics of semi-insulating gallium arsenide bulk photoconductive semiconductor switches (PCSS) with gap size of 10 μ and 25 μ in dark-mode operation. Experimental measurements up to biasing field of 10 kV/cm show near-bistable characteristics in the dark-mode current-voltage...
journal article 2023
document
Chang, Xiwen (author), Long, Yongshuang (author), Wang, C. (author), Xiao, Yue (author)
Asphalt material is an irreplaceable material in road construction. However, it releases VOCs (Volatile Organic Compounds), which do cause pollution to the surrounding environment, during its full life cycle, especially in high-temperature paving stage and summer service time. Asphalt VOCs release mechanism and effective emission reduction...
journal article 2023
document
Zhao, Yingliang (author), Sun, Yong (author), Guo, Z. (author), Sun, Xiaogang (author), Qiu, Jingping (author)
The aim of this study was to improve the immobilization capacity of a binder prepared from As-containing biohydrometallurgy waste (BAW) on arsenic (As) by modifying it with halloysite nanotubes (HNTs) and biochar (BC). The study investigated the influence of HNTs and BC on the chemical fractions and leaching characteristics of As, as well as...
journal article 2023
document
Timmer, W.A. (author), Bak, Christian (author)
This chapter focuses on airfoils for wind turbine blades and their characteristics. The use of panel codes such as XFOIL and RFOIL and CFD codes for the prediction of airfoil characteristics is briefly described. This chapter then discusses the requirements for wind turbine blade airfoils and the effect of leading edge roughness and Reynolds...
book chapter 2023
document
Abdelrahman, Amr Mustafa (author), Kosar, Sadiye (author), Gulhan, Hazal (author), Cicekalan, Busra (author), Ucas, Gulin (author), Atli, Ezgi (author), Guven, Huseyin (author), Ozgun, Hale (author), van Lier, J.B. (author)
Biogas production from anaerobic sludge digestion plays a central role for wastewater treatment plants to become more energy-efficient or even energy-neutral. Dedicated configurations have been developed to maximize the diversion of soluble and suspended organic matter to sludge streams for energy production through anaerobic digestion, such...
journal article 2023
document
Xue, Li Hua (author), Xiao, Jun Hua (author), Zhang, De (author), Guo, Y. (author), Chen, Bing Wen (author)
Particle shape plays an essential role in deformation characteristics of railway ballast bed. The numerical reconstruction of ballast morphological features, including overall shape and angular distribution, remains a hot issue in research on ballast mechanical behavior simulation. A novel shape reconstruction method was adopted to generate...
journal article 2023
document
Yang, Dae Cheol (author), Song, Sang Yoon (author), Kim, Han Jin (author), Lee, Sang In (author), Dutta, B. (author), Kim, Young Kyun (author), Shim, Jae Hyeok (author), Suh, Jin Yoo (author), Na, Young Sang (author), Sohn, Seok Su (author)
The issue of hydrogen embrittlement (HE) in face-centered (FCC) structured alloys is significant for H storage and transportation application due to unanticipated damage beyond its predicted service life. This unpredictable situation may harm human life and limit hydrogen to a reliable source of renewable energy in industrial fields. Recent...
journal article 2023
document
Fereidoonnezhad, B.F. (author), Akbarzadeh Khorshidi, M. (author), Bose, S. (author), Watschke, B. (author), Mareena, E. (author), Nolan, D. (author), Cooney, S. (author), Lally, C. (author)
This paper presents a computational study to investigate the mechanical properties of human penile tissues. Different experimental testing regimes, namely indentation and plate-compression tests, are compared to establish the most suitable testing regime for establishing the mechanical properties of the different penile tissues. An idealised...
journal article 2023
document
Zeng, Simei (author), Tang, Chenggang (author), Hong, H. (author), Yuan, Fang (author), Li, Yuning (author), Wang, Yuqiang (author), Kong, Lingbing (author), Sun, Jingye (author), Zhu, Mingqiang (author), Deng, Tao (author)
The high-temperature pressure sensors have wide applications in aerospace, petroleum, geothermal exploration, automotive electronics, and other fields. However, the traditional silicon-based pressure sensors are restricted to pressure measurement under 120~{\circ }\text{C} and cannot be satisfied to measure the pressure of various gases or...
journal article 2023
Searched for: subject%3A%22Characteristics%22
(1 - 20 of 242)

Pages