Searched for: subject%3A%22Concept%255C+design%22
(1 - 20 of 55)

Pages

document
Berkouwer, Laurens (author)
For the installation of suction pile jackets, a new installation method initiated by SPT Offshore could extend the allowable size for suction pile jackets used as foundations for offshore wind turbines. This method involves installing the suction piles separately from the jacket frame. First, the suction piles are installed on the seabed. Then,...
master thesis 2023
document
Hoeksema, Rindu (author)
This thesis describes the development of a bedside system concept for monitoring the microcirculation of intensive care patients.<br/><br/>Microcirculation refers to the smallest blood vessels in the body, including capillaries, arterioles, and venules. These tiny blood vessels facilitate the exchange of oxygen, nutrients, and waste products...
master thesis 2023
document
Ackermans, Bas (author)
Pectus Excavatum (PE) is a common deformity of the thoracic wall, characterized by a depression of the sternum. In the current golden standard for surgical correction of PE, the deformity is instantaneously corrected, causing severe and prolonged post-operative pain. The goal of this study is to design and validate a novel implant to slowly...
master thesis 2023
document
Hirs Alvarez, Aldo (author)
Currently, the energy transition is a topic for discussion and many organizations are taking measures to reduce the effects of climate change. Armed forces are exempt of these new regulations on the grounds of national security, but some have already started taking steps to reduce the amount of harmful emissions. Due to the high efficiency and...
master thesis 2023
document
Tjeerdsma, Michiel (author)
Reducing greenhouse emissions can be achieved by better insulating buildings. However, wall thickness increases significantly if conventional insulation materials are used. Conventional vacuum insulation panels (VIPs) offer a solution to this problem. VIPs have potential, but can not compete with conventional insulation materials due to their...
master thesis 2022
document
Smit, Menno (author)
Due to the stricter sustainability requirements and associated governmental regulations, the real estate development process in the Netherlands is becoming increasingly complex, narrowing the real estate developer’s opportunity space and increasing the uncertainty regarding the feasibility of the real estate development project. Recently...
master thesis 2022
document
Valcalda, A. (author), de Koningh, D. (author), Kana, A.A. (author)
The introduction of the ‘Safe Return to Port’ (SRtP) regulations strongly impacted the design of passenger ships. To meet the functional requirements of these regulations, the systems on board reached an extreme level of complexity in terms of redundancy and segregation, considerably increasing the difficulties to assess the compliance of the...
journal article 2022
document
Li, M. (author), Aschenbrenner, D. (author), van Tol, D.H. (author), van Eijk, D.J. (author), Vink, P. (author)
For designing large-scale products like an airplane, engaging end-users in the concept phase is difficult. However, early user evaluation is important to choose the path which fits the user’s needs best. In particular, comfort-related assessments are difficult to conduct with digital models that are shown on a desktop PC application. Digital...
conference paper 2022
document
Bronkhorst, Philip (author)
The growth in the offshore wind industry sees an increased demand for offshore service vessels (OSVs). These vessels often operate in harsh conditions, and their performance is heavily dependent on their seakeeping characteristics. Conventional ship design processes fail to effectively consider seakeeping early in the design process, leading to...
master thesis 2021
document
Alaybeyoğlu, Barkin (author)
This thesis project aims at improving inventory management and awareness of craftsmen in their light commercial vehicles, specifically in the trunk area. The term commercial vehicle is used to identify a vehicle which main purpose is to transport goods or materials. The light commercial vehicle market, comprising vans and trucks, in Europe is...
master thesis 2021
document
de Wilde, Chris (author)
This report describes the process of designing a ventilation concept for the renovation industry. The project is in collaboration with Breman Schoorsteentechniek, an installation company located in the Netherlands. The initial brief was kept vague on purpose and described a project in which I was to find a way for Breman, to make their products...
master thesis 2021
document
den Herder, Falko (author)
The graduation project is commissioned by Bayck, a small E-bike start-up which focuses on designing affordable and simple e-bikes. The company is looking for new market opportunities and perceives the Corona outbreak as a potential trigger for behaviour change towards mobility and e-bikes. To find a relevant design direction for Bayck,...
master thesis 2021
document
Haringa, Jaap (author)
The intermodal transportation transport is used to ship goods from A to B all over the world using different modes of transportation. The intermodal freight relies on the use of standardized containers for this transport. All empty containers need to be shipped back to the areas where there is a demand for empty containers. Since a standard...
master thesis 2021
document
Karličić, Arso (author)
A large number of light, modular topsides in the southern North Sea is planned to be removed in the near future. Heerema Marine Contractors (HMC) is currently not the most competitive in this market as smaller contractors can often provide cheaper removal solutions with the use of smaller heavy lift vessels. HMC therefore aims to find a more...
master thesis 2021
document
Alvita, R. (author)
Due to the increase of global containerized trade and container vessel sizes, the necessity of container terminal development is unavoidable. On the other hand, designing a container terminal is a very complex process, and on a concept design phase, a quick assessment for the design alternatives should be done in a limited time, cost, and effort...
master thesis 2020
document
Martens, Roland (author)
Ocean Thermal Energy Conversion (OTEC) has been heavily researched and developed over the last decade. However, no commercial scale for OTEC has been reached yet. OTEC is a clean and renewable source of energy which utilizes the seawater temperature difference between the upper and deep ocean layers to generate electricity. The heat exchangers...
master thesis 2020
document
Winkel, S. (author)
In the current breakwater design process, not all feasible concepts can be explored due to time constraints. However, designers are also influenced by breakwaters constructed near, or at the same location as their breakwater project. But also conservative assumptions influence the breakwater design process, for instance, regarding the wave...
master thesis 2020
document
Zaaijer, B. (author)
Over the last few years, technological innovations led to the development of new haptic interfaces. SenseGlove, a Dutch technology start-up, developed an exoskeleton-based haptic interface capable of motion tracking and providing haptic feedback. The academic industry has been identified as a potential target group for this product. However,...
master thesis 2020
document
Dalal, Aman (author)
The global aircraft fleet was predicted to grow by approximately 40% between 2017 and 2027 by Oliver Wyman (2017). This fast-growing fleet needs to be supported by equally developing Maintenance, Repair, and Overhaul (MRO) divisions of airlines. In light of the growing need for more efficient and technologically advanced aircraft maintenance,...
master thesis 2020
document
Liu, Tianchen (author)
As one of the most popular musical instruments, drum kits' design has not changed a lot since it first emerged. However, the product contains some problems which significantly affect user experience. Not to improve the design, this project aims to dig deeper into the world of drum kit and drummers to identify their emotional values and related...
master thesis 2020
Searched for: subject%3A%22Concept%255C+design%22
(1 - 20 of 55)

Pages