Pages
- 1
- 2
- document
-
Andrade Borges, Emilia (author)This thesis addresses the topic of ongoing (excessive) deformations observed in balanced cantilever prestressed concrete bridges all over the world. Many authors attribute this behavior to the time-dependent phenomena of creep and shrinkage. Balanced cantilever bridges are classified as creep-sensitive structures, and for that reason, a detailed...master thesis 2023
- document
-
Noukari, Athanasia (author)With the continuous increase in transportation volume, bridges face the challenge of carrying higher traffic loads. As a result, bridges undergo fatigue due to repeated and increasing loads, leading to progressive deterioration of their structural reliability. While existing codes already account for several variables affecting the concrete's...master thesis 2023
- document
-
Dieterich Murr, Laura (author)The Netherlands is currently facing a significant challenge regarding its highway system due to the rise in traffic, especially in densely populated areas like The Randstad. However, constructing new infrastructure or replacing old bridges is not a practical solution due to environmental concerns. Most of the country's prestressed concrete...master thesis 2023
- document
-
Botor, Justyna (author)A significant part of composite concrete viaducts was built in the 50s and 60s. This has led to an increasing need for the reassessment of the precast concrete beam bridges in the Netherlands. Many of those bridges are nowadays subjected to higher traffic loads and consequently, have a certain risk of not complying with the currently used design...master thesis 2023
- document
-
Fu, Danny (author)In recent years, the area of structural engineering has found new interesting prospects in the theory of waves. The acoustoelastic properties of materials are utilized in a new promising structural health monitoring (SHM) technique. The propagation of ultrasonic waves through stressed elements gives the ability to find invaluable information on...master thesis 2022
- document
-
Lantsoght, E.O.L. (author), Yang, Y. (author), van der Veen, C. (author)Load testing and in some cases failure (or collapse) testing of bridges is a method to learn more about the behaviour of full-scale bridges in site conditions. Since such experiments, especially failure tests, are expensive, an extensive preparation of these tests is important. This paper addresses the question of when a bridge is a good...journal article 2022
- document
-
Zarate Garnica, G.I. (author), Lantsoght, E.O.L. (author), Yang, Y. (author)Nowadays, with the aging of the bridges and the advancements in technology, load testing has emerged as an effective method to assess existing concrete bridges with missing information, or where analytical methods do not provide an accurate assessment. Two types of load tests are identified: diagnostic load tests and proof load tests. Both...journal article 2022
- document
-
Hogendoorn, Guido (author)Orthotropic bridges can be modelled using a grillage model and an orthotropic plate model. The grillage model has some benefits (i.e.: shorter calculation time and easier to apply pre-stressing) compared to the orthotropic plate model. However, during the Blankenburgverbinding project Ballast Nedam experienced that the transverse load-spread of...master thesis 2021
- document
-
Lantsoght, E.O.L. (author), Zarate Garnica, G.I. (author), Zhang, F. (author), Park, Min-Kook (author), Yang, Y. (author), Sliedrecht, Henk (author)For the assessment of existing slab-between-girder bridges, the shear capacity and failure mode are under discussion. Previous research showed that the static and fatigue punching capacity of the slabs is sufficient as a result of compressive membrane action. The girders then become the critical elements. This research studies the shear capacity...journal article 2021
- document
-
Zhang, F. (author), Zarate Garnica, G.I. (author), Yang, Y. (author), Lantsoght, E.O.L. (author), Sliedrecht, Henk (author)In the Netherlands, many prestressed concrete bridge girders are found to have insufficient shear–tension capacity. We tested four girders taken from a demolished bridge and instrumented these with traditional displacement sensors and acoustic emission (AE) sensors, and used cameras for digital image correlation (DIC). The results show that AE...journal article 2020
- document
-
Lantsoght, E.O.L. (author), van der Veen, C. (author), Koekkoek, Rutger (author), Sliedrecht, Henk (author)In the Netherlands, slab-between-girder bridges with prestressed girders and transversely prestressed decks in between the girders require assessment. Static testing showed that compressive membrane action increases the capacity of these structures and that the decks fail in punching shear. The next question is if compressive membrane action...journal article 2019
- document
-
Lantsoght, E.O.L. (author), van der Veen, C. (author), Koekkoek, Rutger (author), Sliedrecht, Henk (author)Previous research showed that the capacity of existing slab-between-girder bridges is larger than expected based on the punching shear capacity prescribed by the governing codes, as a result of compressive membrane action. A first series of fatigue tests confirmed that compressive membrane action also acts under cycles of loading. However, a...journal article 2019
- document
-
Lantsoght, E.O.L. (author), Koekkoek, Rutger (author), van der Veen, C. (author), Sliedrecht, Henk (author)In the Netherlands, the assessment of existing prestressed concrete slab-between-girder bridges has revealed that the thin, transversely prestressed slabs may be critical for static and fatigue punching when evaluated using the recently introduced Eurocodes. On the other hand, compressive membrane action increases the capacity of these slabs,...journal article 2019
- document
-
Lantsoght, E.O.L. (author), Yang, Y. (author), van der Veen, C. (author), Hordijk, D.A. (author), de Boer, A (author)Existing bridges with large uncertainties can be assessed with a proof load test. In a proof load test, a load representative of the factored live load is applied to the bridge at the critical position. If the bridge can carry this load without distress, the proof load test shows experimentally that the bridge fulfills the requirements of the...journal article 2019
- document
-
Lantsoght, E.O.L. (author), De Boer, Ane (author), van der Veen, C. (author), Hordijk, D.A. (author)Proof load testing of existing reinforced concrete bridges is becoming increasingly important as the current bridge stock is aging. In a proof load test, a load that corresponds to the factored live load is applied to a bridge structure, to directly demonstrate that a bridge fulfills the code requirements. To optimize the procedures used in...journal article 2019
- document
-
Aggarwal, Sakshi (author)New railway bridges for high-speed trains are being built in a many countries around the world. In addition to the construction of new bridges, existing bridges are ageing. These two factors make the assessment of railway bridges essential. The bridges are designed considering certain predefined reliability criteria to account for the...master thesis 2018
- document
-
Gkioka, Maria (author)The Architecture, Engineering & Construction (AEC) industry has been traditionally fragmented, with a lot of disciplines specialising in different aspects of a project and encapsulating different knowledge areas. This research project, entitled “Knowledge Model for the Parametric Design of Concrete Viaducts”, investigates the development of...master thesis 2018
- document
-
CHEN, Xin (author)Bridges with different geometrical configurations have been searched with linear finite element analysis. The aim is to find the position and value of critical proof load. Four different parameters, namely span length, width, skewness and thickness ratio, their influence on proof load are found. In total, 166 sets of data are obtained by...student report 2017
- document
-
Lantsoght, E.O.L. (author), Koekkoek, R.T. (author), Hordijk, D.A. (author), de Boer, A. (author)Proof load tests of bridges can be very useful for structures with a lack of information, or for structures of which the effect of material degradation is difficult to assess. Contrary to diagnostic load testing, proof load testing is not well-defined in current standards in terms of required load and analysis of measurements. The risk...journal article 2017
- document
-
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A. (author), Hordijk, D.A. (author)Load testing of bridges is a practice that is as old as their construction. In the past, load testing gave the traveling public a feeling that a newly opened bridge is safe. Nowadays, the bridge stock in many countries is aging, and load testing is used for the assessment of existing bridges. This paper aims at giving an overview of the current...journal article 2017
Pages
- 1
- 2