Searched for: subject%3A%22Digital%255C%2BImage%255C%2BCorrelation%22
(1 - 20 of 59)
- document
-
Yan, R. (author)High-strength steel (HSS) has higher strength but lower ductility than mild steel. The cross-section of the structural members may be reduced using HSS instead of mild steel, provided the buckling of elements does not govern the failure. The reduced member size benefits the environment and economy by means of less energy consumption, less carbon...doctoral thesis 2023
- document
-
Tawfek, Abdullah M. (author), Ge, Zhi (author), Yuan, Huaqiang (author), Zhang, Ning (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Guan, Yanhua (author), Šavija, B. (author)The mechanical performance of engineered cementitious composite (ECC) depends greatly on fiber orientation and distribution. In this paper, the effect of fiber orientation on ECC's mechanical properties was investigated using two different casting methods: a flow-induced casting was used to enhance the fiber orientation within ECC mixture and...journal article 2023
- document
-
Lee, Minu (author), Mata-Falcón, Jaime (author), Popescu, M.A. (author), Kaufmann, Walter (author)Thin-walled textile-reinforced concrete beams have recently emerged as a promising approach for material-efficient design. However, the increased complexity of the formwork is a major challenge in implementing such elements for broader use in the construction industry. This study presents a novel type of stay-in-place flexible formworks with...journal article 2023
- document
-
Amin, Shashank (author)Kirigami- the Japanese art of paper cutting – is used extensively as a design philosophy for stretchable and morphable structures. An array of cuts on a thin planar sheet creates a structure that can morph into a 3D pattern on applying an in-plane uniaxial load. This type of structure is called a kirigami metasurface. A subset of this type of...master thesis 2022
- document
-
Li, X. (author)Fatigue damage of composite laminates has attracted considerable attention from research community and industry, in view that laminated structures are inevitable to suffer from fatigue loading during their service life. It is rather complicated to understand and explain, what governs the initiation, accumulation, interaction (synergy or...doctoral thesis 2022
- document
-
Boersma, Emma (author)The osteochondral interface is known to smoothly mitigate the stress concentration over the surface area of the subchondral bone, with a structural transition from the cartilage to bone. These sites in the body are exposed to high forces, which makes them prone to failure. To improve the repair strategies, a better understanding of the...master thesis 2022
- document
-
Aditya, Abhyuday (author)Supersonic flows cause thin panels to flutter, which is characterized by high-amplitude self-sustained oscillations, increasing the risk of fatigue failure. Flutter is known to be exacerbated when a shock wave impinges on the panel, creating a shock wave/boundary-layer interaction (SWBLI) which promotes separation of flow and leads to increased...master thesis 2022
- document
-
De Miguel Muñoz, Pablo (author)The rupture of atherosclerotic plaques present in vital arteries is the main trigger of fatal cardiovascular events, such as heart attacks and strokes. Plaque rupture is a mechanical failure of the fibrous plaque tissue that ensues upon large deformations of the tissue, induced by the blood pressure. Current knowledge on the rupture...master thesis 2022
- document
-
Gijzenberg, Kees-Jaap (author)The goal of the thesis is to investigate two main questions for the purpose of modelling fractures in timber with a finite element method. The first question is to evaluate the use of digital image correlation during a three point bending test to obtain mean values for tensile strength and fracture energy, and the follow up question is if it is...master thesis 2022
- document
-
Mathijssen, Lucas (author)Supersonic panel flutter is a self-excited vibration, where energy is transferred into thin flexible panels, such as skin panels in supersonic vehicles, from the (supersonic) flow around them, which can lead to their rapid fatigue failure. Relevant examples of this include the failure of skin panels in the X-15 vehicle, or violent oscillations...master thesis 2022
- document
-
Sun, Renjuan (author), Han, Lebing (author), Zhang, Hongzhi (author), Ge, Zhi (author), Guan, Yanhua (author), Ling, Yifeng (author), Schlangen, E. (author), Šavija, B. (author)This paper presents a study on cracking characterization of engineered cementitious composites (ECC) under flexural cyclic load using digital image correlation (DIC) technique. Five stress levels, namely 0.65, 0.75, 0.8, 0.85 and 0.9 of the flexural strength, were applied. Strain map at the side surface was obtained by DIC and used to drive...journal article 2022
- document
-
Christensen, Christian Overgaard (author), Zhang, F. (author), Zarate Garnica, G.I. (author), Lantsoght, E.O.L. (author), Goltermann, Per (author), Schmidt, Jacob Wittrup (author)Advanced monitoring methods are required to identify stop criteria in proof-load tests. In this study, the combined methodology of two-dimensional digital image correlation and acoustic emission is investigated for its applicability for future implementation in field tests. The two monitoring systems are deemed to provide valuable insight...journal article 2022
- document
-
Smeets, E.T.B. (author), Rans, C.D. (author), Alderliesten, R.C. (author)Ultrasonic spot welding is a joining technique for thermoplastic composites with great potential regarding processing speed and cost. To investigate the damage tolerance and possible inherent damage arresting behavior of multi-spot welded joints, a technique is necessary to measure damage growth in the joints under cyclic loading. Visual...conference paper 2022
- document
-
Inamdar, A.S. (author), Gromala, Przemyslaw Jakub (author), Prisacaru, Alexandru (author), Kabakchiev, Alexander (author), Yang, Yu Hsiang (author), Han, Bongtae (author)Epoxy molding compound (EMC) is widely used for encapsulating automotive electronics. Among all of the components of an electronic package, EMC is most exposed to the atmosphere, and thus undergoes aging. During high-temperature operation, EMC is oxidized, which alters its mechanical properties, and thus can affect the reliability of electronic...book chapter 2022
- document
-
Schreier, S. (author), Jacobi, G. (author)For Offshore Floating Photovoltaics (OFPV) applications, thin-film PV panels on lightweight floating support structures gain increasing scientific and commercial interest. Over the past years, several different concepts of thin-film OFPV have been proposed, with the common denominator of floating mattress or blanket-like support structures...conference paper 2022
- document
-
Yan, R. (author), Xin, Haohui (author), Yang, Fei (author), El Bamby, H. (author), Veljkovic, M. (author), Mela, Kristo (author)The heat-affected zone (HAZ) is an unmelted region of a welded joint that has changed in material properties because of high temperatures during the welding process. HAZ has a lower strength than the base (parent) material (BM) and the weld metal (WM). The lower material strength is more significant if BM is made of high strength steel and...journal article 2022
- document
-
Hengst, Madusha (author)Atherosclerotic plaque rupture is the underlying cause of 50% of deaths in western society. Although screening methodologies exist, plaques are highly complex, and the parameters used to measure plaque vulnerability are often insufficient for correct medical screening. Since plaque rupture occurs when the vascular forces exceed the plaque...master thesis 2021
- document
-
Castro, Saullo G.P. (author), Almeida Jr., J.H.S. (author), St-Pierre, Luc (author), Wang, Z. (author)Measuring the geometric imperfections in cylindrical shells is a critical step necessary to create accurate numerical models that can capture the imperfection-sensitive behavior of these structures. Modern composite structures, such as variable–angle filament–wound (VAFW) cylinders, have a unique imperfection signature that is still unknown to...journal article 2021
- document
-
Yan, R. (author), El Bamby, H. (author), Veljkovic, M. (author), Xin, Haohui (author), Yang, F. (author)The coupon specimen with a transverse butt weld in the middle could be used for determining local constitutive properties of the heat-affected zone (HAZ) and the weld metal (WM) based on the digital image correlation (DIC). However, limited research is reported to demonstrate how to identify the boundary of each region in DIC results....journal article 2021
- document
-
Saeedifar, M. (author), Saleh, M. (author), Nijhuis, Peter (author), Teixeira De Freitas, S. (author), Zarouchas, D. (author)This study is devoted to the use of acoustic emission technique for a comprehensive damage assessment, that is, damage detection, localization, and classification, of an aeronautical metal-to-composite bonded panel. The structure comprised a titanium panel adhesively bonded to carbon fiber–reinforced plastic omega stringers. The panel contained...journal article 2021
Searched for: subject%3A%22Digital%255C%2BImage%255C%2BCorrelation%22
(1 - 20 of 59)