- document
-
van Zwieten, G.J. (author)A vital component in the management of seismic hazard is the study of past seismic events. Classically, this has been the domain of seismology, which studies the dynamic manifestations of the event to infer properties such as epicenter and moment magnitude. More recently it has become possible to perform similar analyses on the basis of the...doctoral thesis 2023
- document
-
van Dokkum, J.S. (author), Bos, Cornelis (author), Offerman, S.E. (author), Sietsma, J. (author)Modelling dislocation glide over the initial part of a stress–strain curve of metals received little attention up to now. However, dislocation glide is essential to ones understanding of the fundamental relationship between inelastic deformation and the evolution of the dislocation network structure. Therefore, we present a model of...journal article 2023
- document
-
Civiero, R. (author), Perez-Rafols, F. (author), Nicola, L. (author)The effect of the presence of a passivation layer on a metal rough surface during contact loading is investigated by means of dislocation dynamics simulations. The metal body is modeled as an FCC single crystal with a self-affine rough surface that is either bare, or covered by a thin coating, impenetrable to dislocations. This analysis...journal article 2023
- document
-
Schouwenaars, R. (author), Kestens, L.A.I. (author)While the grain size effect (GSE) is universally observed in polycrystalline metals and alloys, extended dislocation pileups (DPUs) at grain boundaries (GBs) are rarely observed. Although this discrepancy was noticed over 50 years ago, DPUs are still widely accepted as the explanation for the GSE, often expressed as the Hall-Petch (HP)...journal article 2023
- document
-
Shuang, F.S. (author), Ji, Rigelesaiyin (author), Xiong, Liming (author), Gao, Wei (author)Periodic boundary condition along a dislocation line is commonly used in computing activation barriers or formation energies of kink pair of screw dislocation in BCC metals. Although the effect of periodic image interactions on the computation results is obvious, there had been no comprehensive analysis on such effect. In this work, we...journal article 2023
- document
-
The Development and Stability of Palladium-based Thin Films for Hydrogen-related Energy ApplicationsVerma, N. (author)Hydrogen has been contemplated as a desirable energy source of the future with enormous possibilities to create a carbon-neutral society. Since palladium (Pd) readily absorbs hydrogen even at low pressure and room temperature, Pd and its alloys are suitable for hydrogen production, purification, storage, gas sensors, and fuel cell catalyst....doctoral thesis 2022
- document
-
A'mema, Hibbe (author)This research encompasses an exploration on spaces for mental health and wellbeing for newcomers in the Netherlands with a migration background caused by forced dislocation. This group of new Dutch citizens have a higher prevalence for mental disorders such as anxiety, depression, post-traumatic stress disorder and related symptoms of a...master thesis 2022
- document
-
Crystal Plasticity Simulation of in-grain Microstructural Evolution during Large Plastic DeformationSedighiani, K. (author)The capability of high-resolution modeling of crystals subjected to large plastic strain is essential in predicting many important phenomena occurring in polycrystalline materials, such as microstructure, deformation localization, and in-grain texture evolution. However, due to the heterogeneity of the plastic deformation in polycrystals, the...doctoral thesis 2022
- document
-
Sedighiani, K. (author), Traka, K. (author), Roters, Franz (author), Raabe, Dierk (author), Sietsma, J. (author), Diehl, Martin (author)Physics-based crystal plasticity models rely on certain statistical assumptions about the collective behavior of dislocation populations on one slip system and their interactions with the dislocations on the other slip systems. One main advantage of using such physics-based constitutive dislocation models in crystal plasticity kinematic...journal article 2022
- document
-
Verma, N. (author), Delhez, R. (author), van der Pers, N.M. (author), Hendrikx, R.W.A. (author), Huizenga, R.M. (author), Bottger, A.J. (author)For Pd thin films, microstructural changes involved during hydrogen cycling provide the information needed to predict and optimize the film's mechanical strength. In this paper, a systematic study of the morphology, microstructure, texture, and stress has been performed on Pd thin films during hydrogen loading and deloading cycles at room...journal article 2022
- document
-
Sedighiani, K. (author), Traka, K. (author), Roters, Franz (author), Sietsma, J. (author), Raabe, Dierk (author), Diehl, Martin (author)High-resolution three-dimensional crystal plasticity simulations are used to investigate deformation heterogeneity and microstructure evolution during cold rolling of interstitial free (IF-) steel. A Fast Fourier Transform (FFT)-based spectral solver is used to conduct crystal plasticity simulations using a dislocation-density-based crystal...journal article 2022
- document
-
Chamakura, J.N. (author), Riemslag, A.C. (author), Reinton, T.E. (author), Popovich, V. (author), Sietsma, J. (author)The reversible behaviour of metals at low applied stresses is more complex than the generally assumed linear behaviour. This is primarily because of the reversible nature of dislocation motion leading to a strain contribution known as anelasticity. This work aims to investigate (a) quantification of dislocation structures in industrial grade...journal article 2022
- document
-
van Zwieten, GJ (author), van Brummelen, E. Harald (author), Hanssen, R.F. (author)Earthquakes cause lasting changes in static equilibrium, resulting in global deformation fields that can be observed. Consequently, deformation measurements such as those provided by satellite based InSAR monitoring can be used to infer an earthquake's faulting mechanism. This inverse problem requires a numerical forward model that is both...journal article 2022
- document
-
Irani, N. (author), Murugesan, Yaswanth (author), Ayas, C. (author), Nicola, L. (author)Discrete dislocation plasticity is a modeling technique that treats plasticity as the collective motion of dislocations. The dislocations are described through their elastic Volterra fields, outside of a cylindrical core region, with a few Burgers vectors of diameter. The contribution of the core fields to the dislocation dynamics is...journal article 2022
- document
-
Zheng, Yiwen (author)Plasticity accompanied by dislocation motion is the essential property of metals. A large number of crystal plasticity models have been developed to predict the mechanical response in the work hardening regime while little attention is paid to pre-yield behavior. In this work, we propose a novel model both pre-yield and post-yield from a...master thesis 2021
- document
-
Eipe, Jonathan Joe (author)The Static Recrystallization (SRX) phenomenon of austenite in C-Mn steels have a large impact on the final mechanical properties of the steel. However, the austenite recrystallization kinetics are difficult to investigate experimentally, due to solid-state phase transformations during cooling to room temperature. The best model alloys to examine...master thesis 2021
- document
-
CHANG, Chi (author)In this work, mechanical stability and kinetics of hydrogen (de)sorption of thin Palladium films (100 nm) magnetron sputter deposited on a magnetron sputtered Titanium intermediate layer were studied. In particular of two film morphologies, an open voided columnar morphology and a compact columnar morphology, the substrate-induced stress and its...master thesis 2021
- document
-
van Dokkum, J.S. (author), Bos, C. (author), Offerman, S.E. (author), Sietsma, J. (author)Intricate knowledge of dislocation networks in metals has proven paramount in understanding the constitutive behaviour of these materials but current experimental methods yield limited information on the characteristics of these networks. Recently, the isotropic anelastic response of metals has been used to investigate complex dislocation...journal article 2021
- document
-
van Erp, Joost H.J. (author), Snijders, Thom E. (author), Weinans, H.H. (author), Castelein, René M. (author), Schlösser, Tom P.C. (author), de Gast, Arthur (author)Introduction: Dislocation remains a major complication in total hip arthroplasty (THA), in which femoral component orientation is considered a key parameter. New imaging modalities and definitions on femoral component orientation have been introduced, describing orientation in different planes. This study aims to systematically review the...review 2021
- document
-
Vittorietti, M. (author), Hidalgo Garcia, J. (author), Sietsma, J. (author), Li, W. (author), Jongbloed, G. (author)Investigating the main determinants of the mechanical performance of metals is not a simple task. Already known physically inspired qualitative relations between 2D microstructure characteristics and 3D mechanical properties can act as the starting point of the investigation. Isotonic regression allows to take into account ordering relations...journal article 2021