- document
-
Arumugam, AMIRTHA VARSHINY (author)Input qubit control signals from an arbitrary waveform generator (AWG) operating at room temperature undergo linear dynamical distortions as it traverses various electrical components on the control line connecting to the quantum device. <br/>If uncompensated for, such distortions can have detrimental effects on gate performance, affecting...master thesis 2023
- document
-
Wang, W. (author), van Keulen, A. (author), Wu, J. (author)Additive manufacturing of metal parts involves phase transformations and high temperature gradients which lead to uneven thermal expansion and contraction, and, consequently, distortion of the fabricated components. The distortion has a great influence on the structural performance and dimensional accuracy, e.g., for assembly. It is therefore...journal article 2023
- document
-
Beikmirza, M.R. (author), Shen, Y. (author), de Vreede, L.C.N. (author), Alavi, S.M. (author)This article presents a wideband, energy-efficient digital transmitter (DTX) suitable for multi-mode/multi-band wireless communication applications. It features various operation modes comprising Cartesian (Modes-1/-2) and multi-phase (Modes-3/-4) configurations utilizing LO clocks with different duty cycle in the interleaving/non...journal article 2023
- document
-
Fu, Zhuohui (author)Class D audio amplifier is widely used in many electronic applications such as automobiles, laptops, and mobile phones. However, electromagnetic interference (EMI) generated by Class-D audio amplifiers frequently requires an external LC filter for suppression. The LC filter itself causes significant nonlinearity. Hence, feedback after LC is...master thesis 2022
- document
-
Maarleveld, Arvid (author)Welded details in orthotropic steel decks (OSD) are susceptible to fatigue cracks which are caused by local weld defects, geometric stress concentrations and residual tensile stresses. Residual tensile stresses are formed during the welding process and the distribution depends on many factors. Knowledge about the residual stress distribution is...master thesis 2022
- document
-
Tambe, S.S. (author)Boundary-layer instability induces spiral vortices on rotating cones. As they grow along the cone, the vortices enhance mixing of high- and low-momentum fluid, and subsequently, cause the boundary-layer to transition into a turbulent state. This transition process is scientifically enticing as it is one of the classical problems in fluid...doctoral thesis 2022
- document
-
Hille, Helge C. (author), Kumar, Siddhant (author), De Lorenzis, Laura (author)We propose Floating Isogeometric Analysis (FLIGA), which extends IGA to extreme deformation analysis. The method is based on a novel tensor-product construction of B-Splines for the update of the basis functions in one direction of the parametric space. With basis functions “floating” deformation-dependently in this direction, mesh distortion...journal article 2022
- document
-
Zhang, H. (author), Berkhout, Marco (author), Makinwa, K.A.A. (author), Fan, Q. (author)Class-D audio amplifiers produce electromagnetic interference (EMI), which often needs to be suppressed by an external LC filter. However, due to component nonlinearity, this filter can itself cause significant distortion. This article presents a class-D amplifier that suppresses LC filter nonlinearity by 49 dB and is robust to ±30%...journal article 2022
- document
-
Hagen, W.R. (author)Analysis of citation networks in biomedical research has indicated that belief in a specific scientific claim can gain unfounded authority through citation bias (systematic ignoring of papers that contain content conflicting with a claim), amplification (citation to papers that don't contain primary data), and invention (citing content but...journal article 2022
- document
-
Pashaeifar, M. (author), de Vreede, L.C.N. (author), Alavi, S.M. (author)This letter presents a novel load-modulation-based 3rd-order intermodulation distortion (IMD3) cancellation technique for class-B CMOS power amplifiers (PAs). In a class-B PA, the IMD3 generated by the 3rd-order transconductance ( $g_{m3}$ ) and the gain compression have opposite signs, and thus, they can cancel each other at specific bias...journal article 2022
- document
-
Maarleveld, Arvid (author), Malschaert, D.H. (author), Veljkovic, M. (author)Orthotropic bridge decks are susceptible to fatigue cracks which are influenced by the thickness of their components, welding procedure, type of the weld, the position of the considered detail in relation to the local loading condition and by residual stresses due to welding. The above-mentioned parameters determine the detail category for...conference paper 2022
- document
-
Grazian, F. (author), Shi, W. (author), Soeiro, Thiago B. (author), Dong, J. (author), Bauer, P. (author)When considering EV wireless charging that uses inductive power transfer with magnetic resonance, the coils’ current distortion must be minimized to guarantee compliance with the electromagnetic compatibility limits on the radiated magnetic field set by the relevant industrial standards. This paper analyzes the current distortion caused by...conference paper 2022
- document
-
Zhang, H. (author), Rozsa, N.N.M. (author), Berkhout, Marco (author), Fan, Q. (author)The power supply rejection ratio (PSRR) of conventional differential closed-loop Class-D amplifiers is limited by the feedback and input resistor mismatch and finite common-mode rejection ratio (CMRR) of the operational transconductance amplifier (OTA) in the first integrator. This article presents a 14.4-V Class-D amplifier employing...journal article 2022
- document
-
Shen, Y. (author), Bootsman, R.J. (author), Alavi, S.M. (author), de Vreede, L.C.N. (author)This article presents a wideband 2× 12 -bit direct-digital RF modulator (DDRM) operating in a 0.5-to-3-GHz band for 5G transmitters. The proposed digital Cartesian modulator features an advanced IQ-mapping technique to boost RF power by 3 dB and suppress the I/Q image. To verify the proposed concept, a 40-nm CMOS prototype is implemented...journal article 2022
- document
-
Bajaj, V. (author), Buchali, Fred (author), Chagnon, Mathieu (author), Wahls, S. (author), Aref, Vahid (author)High-symbol-rate coherent optical transceivers suffer more from the critical responses of transceiver components at high frequency, especially when applying a higher order modulation format. Recently, we proposed in [20] a neural network (NN)-based digital pre-distortion (DPD) technique trained to mitigate the transceiver response of a 128...journal article 2022
- document
-
Prabhu, Rahul Rakesh (author)The aerospace industry is always trying to improve aircraft designs in an attempt to improve its performance and also make it clean and sustainable. Boundary layer Ingestion (BLI) is one of the concepts which has the potential to improve fuel and overall propulsive efficiency of an aircraft. The BLI configuration have the engines integrated with...master thesis 2021
- document
-
Brouwer, Gees (author)The principle of a mirror anamorphosis relies on distortion caused by a reflective object of a particular shape and the perspective of a viewer looking into the reflective object to look at an image on the surface. The distortion of the reflected image is intended to form a recognizable image, while the image on the surface looks completely...bachelor thesis 2021
- document
-
Zamponi, R. (author)The interaction of an airfoil with incident turbulence is an important source of aerodynamic noise in numerous applications, such as turbofan engines, cooling systems for automotive and construction industries, high-lift devices on aircraft wings, and landing gear systems. In these instances, turbulence is generally produced by elements that are...doctoral thesis 2021
- document
-
Misiun, Grzegorz (author), van de Ven, E.A. (author), Langelaar, M. (author), Geijselaers, Hubert (author), van Keulen, A. (author), van den Boogaard, Ton (author), Ayas, C. (author)An important cause of failure in powder bed additive manufacturing is the distortion of the part due to thermal shrinkage during printing and the relaxation of residual stresses after its release from the base plate. In this paper, Additive Manufacturing simulations are coupled with Topology Optimization in order to generate designs that are...journal article 2021
- document
-
Rooijers, C.T. (author), Karmakar, S. (author), Kusuda, Y. (author), Huijsing, J.H. (author), Makinwa, K.A.A. (author)In chopper amplifiers, the interaction between the input signal and the chopper clock can give rise to intermodulation distortion (IMD). This chopper-induced IMD is mainly due to amplifier delay, which causes large pulses at the output of the amplifier's output chopper. This article proposes the use of a so-called fill-in technique to eliminate...journal article 2021