Searched for: subject:"Engineering"
(581 - 600 of 1,008)

Pages

document
Zilko, A.A. (author)
Lately, the objective of reservoir engineering is to optimize hydrocarbon recovery from a reservoir. To achieve that goal, a good knowledge of the subsurface properties is crucial. The author is concerned with estimating one of the properties of the field: the permeability of a reservoir. To characterize the fluid flow, a two phase (oil-water)...
master thesis 2012
document
Chlosta, M. (author)
Considering the recent increase in the use of fiber reinforced polymers in the civil engineering industry in general and in the bridge engineering industry in particular, as well as the recently more and more applied cylindrical truss bridge type, this research focuses on the question whether it is possible to combine fiber reinforced polymers...
master thesis 2012
document
Moeyersons, J. (author), Trefois, P. (author)
Occasional flows of the river Nyabage cause floods in the river valley, flooding bridges and buildings, amongst others a small hospital of MsF. The flow is a mixture of water and debris and causes severe damage. The report describes the phenomena and the damage in the area. Some proposals for improvements are given
report 2012
document
Kamp, A. (author)
Tomorrow’s engineers are required to have a good balance between deep working knowledge of engineering sciences and engineering skills. In the Bachelor Aerospace Engineering at TU Delft, students are educated to master these competences so that they are ready to engineer when they graduate. The bachelor curriculum has three mainstreams of about...
conference paper 2012
document
Trommel, R.P. (author), Feenstra, T. (author)
7T MRI-scanners kunnen met de huidige technieken nog niet nauwkeurig genoeg getriggerd worden voor het uitvoeren van scans van hoge kwaliteit. In opdracht van het LUMC is er daarom een project opgestart om een systeem te ontwerpen dat biomedische signalen kan meten, verwerken en versturen om de 7T MRI-scanner te kunnen triggeren. Er zijn drie...
bachelor thesis 2012
document
Mestemaker, T.W.J. (author)
master thesis 2012
document
De Jong, J.P. (author)
The objective of this thesis is to perform systems engineering, detailed (re-)design and testing of the structural and mechanisms subsystems and facilitate the production of components.
master thesis 2012
document
Oruc, S. (author), Cunningham, S.W. (author)
Engineering design is conventionally regarded as a mono actor optimization problem and modeled accordingly. Decision making, values and optimality are building blocks of conventional engineering design. However with the advent of decentralized decision making processes, various actors are more likely to be involved in decision making processes...
conference paper 2012
document
Bots, P.W.G. (author), Van Daalen, C. (author)
The Systems Engineering, Policy Analysis and Management (SEPAM) MSc curriculum taught at Delft University of Technology focuses on the design of socio-technical systems (STS). We teach our students to structure design activities by considering what we call the TIP aspects: Technical systems, Institutions, and decision-making Processes. Students...
conference paper 2012
document
Xu, C. (author)
The objective of this research is to find differences between industrial designers and mechanical engineers in perception and procedures during product development. This research has focused on cooperation between multidisciplinary teams’ participants - both industrial designers and mechanical engineers, because current innovation processes...
master thesis 2012
document
Pluimers, P.J. (author)
Precision engineering impacts every one, every day, by enabling the fabrication techniques and functions required for 21st technological revolutions. Various applications, from display technologies to sensor systems to optical networks make use of so called microelectromechanical systems (MEMS). Motions at micro level with monolithic structures...
master thesis 2012
document
Coenders, J.L. (author)
Interoperability, the ability of different software applications to communicate with each other, is one of the biggest challenges for efficient and effective use of advanced software technology in structural design and engineering. In practice, the problem of interoperability exists very much for the end-user since agreement on common standards...
conference paper 2012
document
Kleijn, A.C. (author)
Railway networks, such as the one in the Netherlands, form an important means of transportation, both for passengers, as well as for transporting goods. Train services carrying passengers often run according to a predefined schedule or timetable. When those train services are delayed, for example due to accidents or malfunctioning rolling stock,...
master thesis 2012
document
Van de Weerd, B. (author), Rolvink, A. (author), Coenders, J.L. (author)
Conceptual design is the starting point of the design process. The conceptual design stage comprises the formation of several ideas or design concepts to meet the imposed constraints. StructuralComponents is a software application that attempts to provide the designing engineer with a suitable set of tools for this stage. It facilitates the...
conference paper 2012
document
Veneman, J.B. (author)
This thesis studies the Switched Linear Quadratic Regulator (SLQR) problem, over a hybrid (continuous and discrete) dynamical model known as "switched system". The problem is defined as computing the optimal continuous and discrete switching control to minimise a quadratic cost function that weights the states and the continuous controls. The...
master thesis 2012
document
Op 't Land, M. (author), Pombinho, J. (author)
The discipline of Enterprise Engineering aims for enterprises to operate as a unified and integrated whole. This discipline therefore adopts the mission to develop theories, models, methods and other artifacts for the analysis, design, implementation and governance of enterprises in a theoretically rigorous and practically relevant manner. The...
conference paper 2012
document
Op 't Land, M. (author), Dietz, J.L.G. (author)
Enterprises increasingly execute complex transformations, such as mergers and splits, chain redesign, sharing and sourcing, and the rationalization of products, processes and applications. Its consequences are seldom sufficiently timely and completely discerned, while this is essential for governing such a transformation. Already in a small...
conference paper 2012
document
Kluis, G.M. (author)
Developments in the Dutch civil sector resulted in a shift of the solution-oriented approach of the market towards a more problem oriented approach. In a problem oriented approach, the principal has to provide the contractor with a larger solution space. This can be achieved by focussing on the definition of the problem instead of the solution....
master thesis 2012
document
Longhi, G. (author)
During this MSc thesis it has been carried out an extensive literature review on fire safety engineering, on timber behaviour on fire and on fire safety regulations in different countries. A preliminary design for a high rise cross laminated timber building (CLT) has been carried out in order to obtain a minimum thickness of the structural...
master thesis 2012
document
Van Agtmaal, B.C.M. (author)
As a building ages the building performance demands may change. The CEG building is a representative case of building that has to face modern demands. Indoor comfort is a subject which does not only depend on physical parameters, but also on the occupants perception of comfort. To capture this duality this research has performed a user research....
master thesis 2012
Searched for: subject:"Engineering"
(581 - 600 of 1,008)

Pages