Searched for: subject%3A%22FDM%22
(1 - 20 of 29)

Pages

List view
Grid view
document
van der Laan, Femke (author)
This research explores the possibilities of combining additive manufacturing and weaving of textiles to create a novel textile-form. In recent years, additive manufacturing has revolutionized manufacturing processes by enabling the creation of complex three dimensional geometries with precision. Conversely, weaving, a traditional method of...
master thesis 2024
document
Kweldam, Edwin (author)
The increase of demand for offshore wind energy resulted in an increase of larger wind turbines. These turbines are often placed on top of a monopile (MP) substructure. The conventional method for installing these MPs uses a jack-up vessel. However, due to the local bathymetry and soil conditions. This method has its drawbacks, such as...
master thesis 2023
document
van Leeuwen, Stach (author)
Additive manufacturing technologies are widely gaining more attention, resulting in the development or modification of 3D-printing techniques and materials. At the same time, economical and ecological aspects force the industry to develop materials that are easier and quicker to manufacture, while attaining their desired properties. The...
master thesis 2023
document
Flipse, Delano (author)
The placement of a subwoofer has significant impact on the quality of its sound reproduction. This paper present a method to optimise subwoofer placement in a room. Resonances caused by room boundaries (called "room modes") cause localised peaks and lows for specific lower frequencies. The goal is to minimize the simulated frequency response...
bachelor thesis 2023
document
Kraaijenbrink, Lennart (author)
With the rise of hydrogen as a green alternative for fossil fuels, the demand for storage capacity of hydrogen increases significantly. Due to the high risk of explosions in urban environments it brings along, the blast analysis of buildings within in range of the explosions becomes more relevant.<br/><br/>The goal of this research is to develop...
master thesis 2022
document
Donders, Ennio (author)
While Additive Manufacturing is famed for its ability to create complex geometries, sustainability of the technologies is given less attention. Due to the need to melt filament and heat up the printbed, FDM requires a considerable amount of energy. On top of that, valuable and non-renewable resources are used for the production of the commonly...
master thesis 2022
document
Mora Benitez, Christian (author)
Fused deposition modeling (FDM) is one of the fastest-growing additive manufacturing processes in recent years. Nevertheless, the mechanical properties cannot be matched to those of traditional manufacturing methods such as injection molding.The research presented in this report aims to demonstrate the limitations of fusion deposition models and...
master thesis 2022
document
LI, CHULONG (author)
A new approach to applying the finite difference method for solving the shell model problem. By solving the general shell differential equations (Sanders-Koiter equations) with first-order finite-difference approximation only, a finite difference algorithm called shell code has been developed. <br/><br/>To this end, a 1200-line Python program...
master thesis 2021
document
van der Vlist, Klaas Jan (author)
This report shows the development of a method that joins two chemically incompatible materials during Fused Deposition Modelling (FDM). State of the art FDM printers can extrude more than one material during the printing process. Due to chemical incompatibility of many polymers, the selection for combining materials is limited. This gives the...
master thesis 2021
document
Aliana Guardia, Marc (author)
In Fused Deposition Modeling (FDM) for rapid-prototyping, the 3D printed parts usually have a short life, generating a constant stream of waste material and lost value. This issue becomes more relevant in the early stages of product development, where 3D printed prototypes become rapidly obsolete due to design iterations and advances in the...
master thesis 2021
document
Gokhale, Sneha (author)
Additive Manufacturing (AM) is undergoing a radical evolution. AM businesses such as Ultimaker (UM) are speeding up industrial production through digital design and local manufacturing to enable industries to produce “what they need, where they need it, and when they need it” (“Ultimaker”, 2019), while also being cost-effective. AM is perceived...
master thesis 2020
document
van den Berg, Noah (author)
A proposal is made on how to design and create an openable surface in a mono material 3D printed tiny house that consists out of recycled PET.
master thesis 2020
document
Hijne, Iris (author)
This thesis is a contribution to the research on Active Inference for Robotics. Active Inference is an intricate, intriguing theory from neuroscience, a field in which it has already gained a greater following and popularity. This theory, based on the underlying Free Energy Principle, provides a unified account of perception, action and learning...
master thesis 2020
document
Li, Chulong (author)
A new approach to applying the finite difference method for solving the plate model problem. By decomposing higher-order differential equations in plate theory into several first-order differential equations, a python program was built in an attempt to solve those equations with first-order finite difference approximation. After testing several...
master thesis 2020
document
Eppenga, Eric (author)
The multi-pole PML (MPML) is tested on models that simulate seismic waves traveling through the subsurface. Using a recursive integration technique a stretching function consisting of the sum of multiple stretching functions is implemented in the velocity-stress finite difference time domain wave equations. The MPML is implemented in both the...
master thesis 2019
document
Maagdenberg, Duncan (author)
The fourth Industrial Revolution stands for the current trends of automation and data exchange in manufacturing technologies - which comes with a considerable amount of opportunities as most manufacturers attempt to stay ahead of the competition. One of the possibilities is the addition of FDM printing - one of the types of additive...
master thesis 2019
document
Hadiputra, Andika Praditya (author)
master thesis 2018
document
Schuringa, Gilles (author)
This thesis focuses on the utilisation of additive manufacturing (AM) technologies for the production of accordions. The goal is to reduce the man hours required in the production and repair of the instrument. The client, Pigini Nederland, currently produces a small accordion for children and adults: the MiniMouse. This instrument is sold for...
master thesis 2018
document
Quinn, Marshall (author)
This thesis investigated if Fused Filament Fabrication (FFF), a 3D printing technique, could be used in a simulated on-orbit environment. A modified FFF printer was exposed to a vacuum environment and fabricated a variety of components from polycarbonate filament. The printer and its subsystems were evaluated for functionality in the vacuum...
master thesis 2018
document
Al-Djema, Rawsan (author)
Sandy soils are characterized by negligible cohesion (compared to clay) and limited drainage capacity (compared to gravel), which makes these soils susceptible to excess pore (water) pressure accumulation induced by short term dynamic loading cycles. Pile driving subjects the soil to such type of dynamic loading. Accumulation of excess pore...
master thesis 2018
Searched for: subject%3A%22FDM%22
(1 - 20 of 29)

Pages

List view
Grid view