Searched for: subject:"Fabry%E2%80%93Perot"
(1 - 20 of 21)

Pages

document
Kouwenhoven, Kevin (author)
On-chip spectrometers, such as DESHIMA and SuperSpec, require transmission lines with very low loss of tanδ &lt; 10<sup>-4</sup> to achieve sufficient system efficiency. Transmission lines with higher loss would introduce too much signal attenuation in the line from antenna to filter and in the filters themselves. Data regarding the losses of...
master thesis 2019
document
Andrašec, Josip (author)
This research is focused on the feasibility assessment of a novel technology of metasurfaces in order to design a spectropolarimeter with the thickness of a few micrometers integrated on the detector array. The motivation behind the research is miniaturization of state-of-the-art spectropolarimeters. The requirements for the instrument are...
master thesis 2019
document
Dolleman, R.J. (author)
Micro and nanomechanical sensors are indispensable in modern consumer electronics, automotive and medical industries. Gas pressure sensors are currently the most widespread membrane-based micromechanical sensors. By reducing their size, their unit costs and energy consumption drops, making them more attractive for integration in new applications...
doctoral thesis 2018
document
van Dam, S.B. (author), Ruf, M.T. (author), Hanson, R. (author)
Defect centres in diamond are promising building blocks for quantum networks thanks to a long-lived spin state and bright spin-photon interface. However, their low fraction of emission into a desired optical mode limits the entangling success probability. The key to overcoming this is through Purcell enhancement of the emission. Open Fabry...
journal article 2018
document
Blanco Montero, D.J. (author), Rajo-Iglesias, E. (author)
A wearable version of Fabry-Pérot antenna is presented. This is a simple way of designing a medium-To high-gain antenna with low back radiation. The study of the effect of antenna bending in the performances is presented. Besides, the replacement of a superstrate layer by a metallic frequency selective surface is proposed. In this way, there...
journal article 2018
document
Allen, Monica T. (author), Shtanko, Oles (author), Fulga, Ion C. (author), Wang, Joel I.J. (author), Nurgaliev, Daniyar (author), Watanabe, Kenji (author), Taniguchi, Takashi (author), Akhmerov, A.R. (author), Jarillo-Herrero, Pablo (author), Levitov, Leonid S. (author), Yacoby, Amir (author)
Electron surface states in solids are typically confined to the outermost atomic layers and, due to surface disorder, have negligible impact on electronic transport. Here, we demonstrate a very different behavior for surface states in graphene. We probe the wavelike character of these states by Fabry-Perot (FP) interferometry and find that,...
journal article 2017
document
Beekmans, Steven (author), Lembrechts, T. (author), van den Dobbelsteen, J.J. (author), van Gerwen, D.J. (author)
A range of complex percutaneous procedures, such as biopsy or regional anesthesia, rely heavily on accurate needle insertion. Small variations in the mechanical properties of the pierced tissue can however cause deviations from the projected needle path and can thus result in inaccurate placement of the needle. Navigation of a rigid needle...
journal article 2017
document
Ayerden, N.P. (author), Mandon, Julien (author), Harren, Frans J.M. (author), Wolffenbuttel, R.F. (author)
Increasing demand for field instruments designed to measure gas composition has strongly promoted the development of robust, miniaturized and low-cost handheld absorption spectrometers in the mid-infrared. Efforts thus far have focused on miniaturizing individual components. However, the optical absorption path that the light beam travels...
journal article 2017
document
Šmíd, R. (author), Hänsel, A. (author), Pravdová, L. (author), Sobota, J. (author), Cíp, O. (author), Bhattacharya, N. (author)
In this work we present a design of an external optical cavity based on Fabry-Perot etalons applied to a 100 MHz Er-doped fiber optical frequency comb working at 1560 nm to increase its repetition frequency. A Fabry-Perot cavity is constructed based on a transportable cage system with two silver mirrors in plano-concave geometry including the...
journal article 2016
document
Ayerden, N.P. (author), Ghaderi, M. (author), De Graaf, G. (author), Wolffenbuttel, R.F. (author)
The design, fabrication and characterization of a highly integrated optical gas sensor is presented. The gas cell takes up most of the space in a microspectrometer and is the only component that has so far not been miniaturized. Using the tapered resonator cavity of a linear variable optical filter as a gas cell enables ultimate miniaturization,...
conference paper 2015
document
Ghaderi, M. (author), Ayerden, N.P. (author), De Graaf, G. (author), Wolffenbuttel, R.F. (author)
The design and CMOS-compatible fabrication of airgap-based optical filters in a surface micromachining process with sacrificial release using thevapour phase is presented. An airgap-dielectric layer combination offers a higher refractive index contrast, as compared to the conventional all-dielectriclayer based filters, which results in a higher...
conference paper 2015
document
Lembrechts, T.P.A. (author)
Physicians use small variations in the needle insertion force to identify tissue properties and detect membrane punctures during needle insertion. Navigation of a needle towards the target tissue, for example to take a biopsy, is often based on detecting these variations in force. Literature shows that presenting physicians force feedback based...
master thesis 2015
document
Ferreira, D.S. (author), Mirkovic, J. (author), Wolffenbuttel, R.F. (author), Correia, J.H. (author), Feld, M.S. (author), Minas, G. (author)
A strategy for spectroscopy tissue diagnosis using a small number of wavelengths is reported. The feasibility to accurately quantify tissue information using only 16 wavelengths is demonstrated with several wavelength reduction simulations of the existing esophageal data set. These results are an important step for the development of a...
journal article 2011
document
Emadi, A. (author), Grabarnik, S. (author), Wu, H. (author), De Graaf, G. (author), Hedsten, K. (author), Enoksson, P. (author), Correia, J.H. (author), Wolffenbuttel, R.F. (author)
This paper reports on the functional and spectral characterization of a microspectrometer based on a CMOS detector array covered by an IC-Compatible Linear Variable Optical Filter (LVOF). The Fabry-Perot LVOF is composed of 15 dielectric layers with a tapered middle cavity layer, which has been fabricated in an IC-Compatible process using resist...
conference paper 2010
document
Emadi, A. (author), Wu, H. (author), De Graaf, G. (author), Wolffenbuttel, R.F. (author)
This paper reports on a CMOS-Compatible Linear Variable Optical Filter (LVOF) visible micro-spectrometer. The CMOS-compatible post process for fabrication of the LVOF has been used for integration of the LVOF with a CMOS chip containing a 128-element photodiode array and readout circuitry. Fabrication of LVOF involves a process for fabrication...
conference paper 2010
document
Joo, K.M. (author), Ellis, J.D. (author), Spronck, J.W. (author), Munnig Schmidt, R.H. (author)
We present a folded, multi-pass cavity design for displacement measuring Fabry–Perot interferometry. The cavity length is designed to be one-quarter of the physical length needed for a typical Fabry–Perot interferometer by using a quarter-wave plate and a retroreflector. This enhances the displacement sensitivity by a factor of four, allowing...
journal article 2009
document
Della Corte, F.G. (author), Merenda, M. (author), Cocorullo, G. (author), Iodice, M. (author), Rendina, I. (author), Sarro, P.M. (author)
journal article 2009
document
De Graaf, G. (author)
doctoral thesis 2008
document
Minas, G. (author), Wolffenbuttel, R.F. (author), Correia, J.H. (author)
journal article 2006
document
Wicaksono, D.H.B. (author), Pandraud, G. (author), French, P.J. (author)
This paper presents an on-going work to develop micromachined silicon-based strain sensor inspired from the campaniform sensillum of insects. We present simple optical setup for the characterisation of a membrane-in-recess structure as an early stage in mimicking the natural sensor. The microstructure is a 500 nm-thick SiO2/SiN circular membrane...
conference paper 2005
Searched for: subject:"Fabry%E2%80%93Perot"
(1 - 20 of 21)

Pages