Searched for: subject%3A%22Force%22
(1 - 20 of 701)

Pages

document
Cascioli, E. (author)
The current need to ensure an effective and prompt transition of the energy sector towards zero-carbon has renewed the interest for nuclear technology. Small Modular Reactors (SMRs) seem particularly interesting for their reduced capital cost, operational flexibility and enhanced safety and security. Different SMR concepts are being developed...
doctoral thesis 2024
document
Zhu, Jeffrey (author)
Neutrally stable metamaterials can maintain differ- ent shapes without any energy input, making it a key innovation in the quest for more energy-efficient technologies. Despite this intriguing property, the research in this area is scarce. This study proposes a method for achieving neutral stability in metama- terials. This method is validated...
master thesis 2024
document
Taberna, A. (author)
Amid the Anthropocene, the escalating threat of flooding, driven by extreme rainfall and sea-level rise, challenges societies worldwide. In the last two decades, floods have impacted billions and inflicted colossal economic losses. Concurrently, the global trend towards urbanization predicts that by 2050, about 70\% of the global population will...
doctoral thesis 2024
document
Pletzer, Johannes (author)
At speeds roughly between five and ten thousand km/h, hypersonic aircraft offer the promise of an extremely fast means of transport. Growing concerns about climate warming, however, direct attention to sustainability. This thesis focuses on atmospheric composition and radiation changes by considering a range of individual hypersonic aircraft...
doctoral thesis 2024
document
Veraart, Marijn (author)
Cycling as a mode of transport is getting increasingly more attention from academics and governments around the world. It improves the physical and mental well being of citizens, it is efficient in terms of space and it provides economic benefits. However, traffic engineers and urban planners of these cities currently lack the means to...
master thesis 2024
document
Kuntz, Mark (author)
This thesis presents the state-of-the art gripping literature and the implementation and extension of an existing Pseudo-Rigid Body Modelling (PRBM) method for modelling initially-curved compliant grippers out of which a circular object is extracted. From the existing literature, challenges are found in the design and evaluation of concepts of...
master thesis 2024
document
Wopereis, Michiel (author)
Nanomechanical resonators made of two-dimensional (2D) materials are the subject of intensive research due to their remarkable properties, allowing them to operate at high frequencies with high sensitivity. However, dissipation losses and manufacturing issues have prevented them from reaching their full potential. This thesis aims to overcome...
master thesis 2024
document
Hoekwater, William B. (author), Ronaes, E.P. (author), Hassan HosseinNia, S. (author)
Recent studies have shown that tunable magnets (soft permanent magnets) can significantly reduce Joule heating in electromagnetic actuators. To achieve high motion accuracy and repeatability, this article proposes a novel actuator design with a linearized force-flux relation. In prior designs of variable reluctance tunable magnet actuators,...
journal article 2024
document
Krugla, M. (author), Offerman, S.E. (author), Sietsma, J. (author), Hanlon, Dave N. (author)
The production reality of sheet steels from casting to the end product is such that in the cases of ultra- and advanced high-strength steels, we have to deal with the segregation of elements on macro- and microlevels. Both can have a significant impact on the microstructure formation and resulting properties. There are several production stages...
journal article 2024
document
Atif, Muhammad (author), Wang, Xibin (author), Xie, Lijing (author), Giasin, Khaled (author), Ma, Yuan (author), Jiang, Chulin (author), Koklu, Ugur (author), Sinke, J. (author)
This study aims to evaluate the effectiveness of Ultrasonic-assisted drilling (UAD) of Glass laminate aluminium reinforced epoxy (GLARE) at high cutting speeds (Spindle speeds: 3000–7500 rpm; feed rates 300–750 mm/min) by analysing the thrust force and hole quality metrics (surface roughness, hole size, and burr formations. The research also...
journal article 2024
document
van Dijk, M.P. (author), Hoozemans, Marco J.M. (author), Berger, M.A.M. (author), Veeger, H.E.J. (author)
In wheelchair sports, there is an increasing need to monitor mechanical power in the field. When rolling resistance is known, inertial measurement units (IMUs) can be used to determine mechanical power. However, upper body (i.e., trunk) motion affects the mass distribution between the small front and large rear wheels, thus affecting rolling...
journal article 2024
document
Wasik, Dominika O. (author), Vicent-Luna, José Manuel (author), Luna-Triguero, Azahara (author), Dubbeldam, David (author), Vlugt, T.J.H. (author), Calero, Sofía (author)
The series of metal–organic frameworks M-MOF-74 gained popularity in the field of capture and separation of CO<sub>2</sub> due to the presence of numerous, highly reactive open-metal sites. The description of effective interactions between guest molecules and open-metal sites without accounting for polarization effects is challenging but it...
journal article 2024
document
Tišma, M. (author), Kaljević, Jovana (author), Gruber, Stephan (author), Le, Tung B.K. (author), Dekker, C. (author)
Bacterial cells require DNA segregation machinery to properly distribute a genome to both daughter cells upon division. The most common system involved in chromosome and plasmid segregation in bacteria is the ParABS system. A core protein of this system - partition protein B (ParB) - regulates chromosome organization and chromosome...
review 2024
document
van Damme, M. (author), den Ouden-van der Horst, D. (author)
Methods have been developed to predict how hydrodynamic loads acting on nearly saturated porous media are transmitted to the subsoil. In line with the effective stress principle of Terzaghi, these methods apply the boundary conditions that the effective stresses at the surface of a porous medium are zero, and that the pore water pressures...
journal article 2024
document
Xu, Ying (author), Casalino, D. (author), Zhang, Xiao Zheng (author), Zhang, Yong Bin (author), Bi, Chuan Xing (author)
A time-domain inverse aeroacoustic method based on the convective Ffowcs Williams–Hawkings equation is presented. The method allows to determine, in real-time, the unsteady forces exerted on rotating blades in the presence of a moving medium. The inversion procedure is based on a space-time regularization with a mixed l1,2-norm, which guarantees...
journal article 2024
document
Assaf Martinez-Streignard, E.I. (author), Liu, X. (author), Lin, P. (author), Erkens, S. (author)
This paper presents a United Atom (UA) force field for simulating hydrocarbon molecules in bituminous materials, integrating explicit hydrogens into beads with their parent atom. This method simplifies all-atom molecular models, significantly accelerating Molecular Dynamics (MD) simulations of bitumen by 10 to 100 times. Key advantages...
journal article 2024
document
Gonzalez Saiz, G. (author)
Experimental aeroelasticity has been hindered by the intrusivity of measurement equipment and complexity of the experimental setups. Advancements in hardware development have been encouraging optical tracking techniques to replace cross correlation approaches in experimental aerodynamics. However, digital image correlation (DIC) is still the...
doctoral thesis 2023
document
Römer, Nol (author)
As mechanisms become increasingly precise, so becomes the reduction of noise and vibration increasingly important. One method for eliminating vibrations in mechanisms is dynamic balancing. This method prevents vibrations from occurring by designing the mechanism such that the inertial forces and moments of all bodies in the mechanism cancel each...
master thesis 2023
document
Martin Rodriguez, Ruben (author)
The provision of somatosensory information may play a fundamental role in the recovery of stroke patients. Particularly, tactile information is known to influence motor control by contributing to the perception of the weight, friction, and slip condition of objects. Despite this, the inclusion of tactile information through haptic rendering in...
master thesis 2023
document
Mol, Tessa (author)
Achieving appropriate soft tissue tension around the hip joint is an important factor for achieving hip stability after Total Hip Arthroplasty (THA). Hip instability leads to dislocations, pain, and is a common reason for early revision surgery. The current soft tissue tension assessments available during surgery rely on experience, and...
master thesis 2023
Searched for: subject%3A%22Force%22
(1 - 20 of 701)

Pages