Effect of Wing Stiffness and Folding Wingtip Release Threshold on Gust Loads

This study presents an aeroelastic wind-tunnel experiment to identify the influence of the wing stiffness and hinge release threshold on the gust load alleviation performance of a folding wingtip design. Five models with different stiffness and tailoring properties are tested, and the wing root bending moment at different conditions is compared...

Incremental Nonlinear Control for Aeroelastic Wing Load Alleviation and Flutter Suppression

This paper proposes an incremental nonlinear control method for an aeroelastic system’s gust load alleviation and active flutter suppression. These two control objectives can be achieved without modifying the control architecture or the control parameters. The proposed method has guaranteed stability in the Lyapunov sense and also has...

Variations in Monthly Maximum Gust Speed at St Mary's, Isles of Scilly (UK)

Long-term variations in maximum gust speeds have been analyzed using wind measurements recorded at St Mary's, Isles of Scilly, UK, and possible drivers of recent changes have been investigated. A rigorous homogenization procedure has been applied to the wind records to remove discontinuities mainly caused by non-climatic changes. Trends in...

An aeroelastic optimisation framework for manufacturable variable stiffness composite wings including critical gust loads

This work presents a new aeroelastic optimisation framework for the preliminary design of variable stiffness composite wing structures. The framework is constructed by sequentially and iteratively solving two sub-problems: aeroelastic tailoring and lay-up retrieval, using gradient-based algorithms with full-analytical sensitivities provided....

Embodied airflow sensing for improved in-gust flight of flapping wing MAVs

Flapping wing micro aerial vehicles (FWMAVs) are known for their flight agility and maneuverability. These bio-inspired and lightweight flying robots still present limitations in their ability to fly in direct wind and gusts, as their stability is severely compromised in contrast with their biological counterparts. To this end, this work aims at...

Design and testing of aeroelastically tailored composite wing under fatigue and gust loading including effect of fatigue on aeroelastic performance

The aim of the paper is to experimentally validate a numerical design methodology for optimizing composite wings subject to gust and fatigue loading requirements and to assess the effect of fatigue on the aeroelastic performance of the wing. Traditionally, to account for fatigue in composite design, a knockdown factor on the maximum stress...

The interaction between active aeroelastic control and structural tailoring in aeroservoelastic wing design

This paper presents an analysis of the interaction and trade-off between active aeroelastic control and passive structural tailoring on a free-flying fully flexible aircraft model. Both technologies are included in the preliminary design of a typical transport aircraft configuration with a conventional control surface layout containing...

Preliminary aeroelastic design of composite wings subjected to critical gust loads

Including a gust analysis in an optimization framework is computationally expensive as the critical load cases are not known a priori and hence a large number of points within the flight envelope have to be analyzed. Model order reduction techniques can provide significant improvement in computational efficiency of an aeroelastic analysis. In...

Cascaded incremental nonlinear dynamic inversion for MAV disturbance rejection

This paper presents the cascaded integration of Incremental Nonlinear Dynamic Inversion (INDI) for attitude control and INDI for position control of micro air vehicles. Significant improvements over a traditional Proportional Integral Derivative (PID) controller are demonstrated in an experiment where the quadrotor flies in and out of a 10 m...

Design and testing of a low subsonic wind tunnel gust generator

This paper summarises the design of a gust generator and the comparison between high fidelity numerical results and experimental results. The gust generator has been designed for a low subsonic wind tunnel in order to perform gust response experiments on wings and assess load alleviation. Special attention has been given to the different...

Assessing the Severity of Wind Gusts with Lidar

Lidars have gained a lot of popularity in the field of wind energy, partly because of their potential to be used for wind turbine control. By scanning the oncoming wind field, any threats such as gusts can be detected early and high loads can be avoided by taking preventive actions. Unfortunately, lidars suffer from some inherent weaknesses that...

Constrained stochastic simulation: Generation of time series around some specific event in a normal process

The method of so-called constrained stochastic simulation is introduced. This method specifies how to efficiently generate time series around some specific event in a normal process. All events which can be expressed by means of a linear condition (constraint) can be dealt with. Two examples are given in the paper: the generation of stochastic...