Constant-amplitude and flight-simulation fatigue tests on adhesive bonded lap joint specimens of 2024-T3 sheet material

Fatigue tests were carried out on Redux and FM 123/5 bonded specimens at various stress levels, temperatures (RT to 65 C) and low and high test frequencies. Observations were made on the type of failure (bond line failure or sheet failure) and the significance of the adhesive squeezeout for crack nucleation. An analysis of the data and a...

Flight simulation fatigue crack propagation in metal/carbon-epoxy laminates

Flight simulation fatigue crack propagation tests with gust spectrum loading were carried out on laminates of (i) aluminium alloy 2024-T3/carbon-epoxy, (ii) aluminium alloy 7475-T761/carbon-epoxy and (iii) titanium alloy Ti-6Al-4V/carbon-epoxy with nominal weight savings of 30% and 40% as compared to equivalent 2024-T3 Alclad and 7475-T761...

The use of Arall in fuselage skins

The report starts with a general review of the loading of transport aircraft fuselages and the consequent fuselage skin stresses Taking the F-28 fuselage as an example, the potential weight savings that can be obtained by using ARALL as skin material are assessed. The report ends with conclusions and recommendations

Review of aeronatical fatigue investigations in the Netherlands during the period march 1977 - february 1979

Paper presented at the 16th ICAP Conference, Brussels, 14 and 15 May 1979.

Environmental fatigue crack propagation in metal/composite laminates

Flight simulation fatigue crack propagation tests with gust spectrum loading were carried out on 2024-T3/carbon-epoxy, 7475-T76l/carbon-epoxy and Ti-6Al-4V/carbon-epoxy laminates with nominal weight savings of -30% as compared to equivalent 2024-T3 panels. The performance of the 2024-T3/carbon-epoxy laminates was much superior to those of the...

The effect of gust alleviation on fatigue in 2024-T3 Alclad

Fatigue tests under flight simulation loading were done on simple notched 2024-T3 Alclad sheet specimens. Reduction of the gust load amplitudes resulted in an increase of crack initiation life but hardly influenced crack propagation. Reduction of the overall stress level increased both initiation and crack propagation life. The observed...

Engineering application of fracture mechanics to flight simulation fatigue crack propagation

The effect of sheet thickness on flight simulation fatigue crack propagation in 2024-T3, 7475-T761 and mill annealed Ti-6A1-4V

Flight simulation fatigue crack propagation tests were carried out on 2024-T3, 7475-T761 and mill annealed Ti-6A1-4V sheet in thicknesses up to 3 nim and representative for traJisport aircraft lower wing skin stiffened panels of end load capacities 1.5 and 3 MN/m. There was a significant effect of sheet thickness on crack propagation. Thinner...

The effect of sheet edge working on the fatigue life under flight-simulation loading

Fatigue tests under flight-simulation loading have been performed on unnotched Alclad 2024-T3, anodised 2.0 mm thick sheet specimens, manufactured according to several machine-shop processes applied in the air craft industry. From the results it appears that milling is preferable to stamping. Rounding off the edges is also advantageous. The...

Flight simulation fatigue crack propagation evaluation of candidate lower wing skin materials with particular consideration of spectrum truncation

Flight simulation fatigu-e crack propagation tests were carried out on 2024-T3, 7475-T761 and mill annealed Ti-6A1-4V sheet in thicknesses up to 3 miri and representative for transport aircraft lower wing skin stiffened panels of end load capacities 1.5 and 3 MN/m. The performance of 2024-T3 was much superior, owing mainly to greater retardation...

Heat treatment studies of aluminium alloy forgings of the AZ 74.61 type. Interim report no. 3: Fatigue crack propagation performance under manoeuvre spectrum loading

The fatigue crack propagation performance of the alloy AZ 74.61 under manoeuvre spectrum loading was studied. The crack propagation behaviour was also compared with that of the American forging alloy AA 7050, not only for simulated manoeuvre loading but also for simulated gust loading and programme loading. It was found that, at comparable...

Heat treatment studies of aluminium alloy type 7050 forgings. Interim report no. 2: The effect of heat treatment on a variety of engineering properties

The effect of variety of heat treatments on various engineering properties was studied with the aim to derive an optimum heat treatment. The engineering properties comprised Vickers hardness, short-time tensile strength, fatigue crack propagation resistance, fracture toughness and stress corrosion resistance. The test results were compared with...

Fracture toughness and fatigue properties of the new aluminium alloy 7475-T76

Residual strength tests have been performed on 610 mm wide centre cracked panels. During the tests, stable crack growth was filmed and crack opening displacements were measured. Fracture toughness was determined using the method of Feddersen. Flight simulation fatigue tests were carried out to investigate the crack propagation properties. A...