Searched for: subject%3A%22High%255C%252Btemperature%22
(1 - 13 of 13)
document
Mo, J. (author), LI, J. (author), Zhang, Y. (author), Romijn, J. (author), May, Alexander (author), Erlbacher, Tobias (author), Zhang, Kouchi (author), Vollebregt, S. (author)
In this work, a highly linear temperature sensor based on a silicon carbide (SiC) p-n diode is presented. Under a constant current biasing, the diode has an excellent linear response to the temperature (from room temperature to 600°C). The best linearity (coefficient of determination ${R}^{{2}}$ = 99.98%) is achieved when the current density...
journal article 2023
document
Mirzaie Yegane, M. (author), Boukany, P. (author), Zitha, P.L.J. (author)
Due to increased energy demand, it is vital to enhance the recovery from existing oilfields. Polymer flooding is the most frequently used chemical enhanced oil recovery (cEOR) method in field applications that increases the oil sweep and displacement efficiencies. In recent years, there has been growing interest to assess the use of polymer...
journal article 2022
document
Radmanesh, Farzaneh (author), Sudhölter, Ernst J. R. (author), Tena, Alberto (author), Elshof, Maria G. (author), Benes, Nieck E. (author)
An interfacial polymerization process is introduced for the fabrication of thermally stable cyclomatrix poly(phenoxy)phosphazenes thin-film composite membranes that can sieve hydrogen from hot gas mixtures. By replacing the conventionally used aqueous phase with dimethyl sulfoxide/potassium hydroxide, a variety of biphenol molecules are...
journal article 2022
document
Spanjers, H. (author)
book chapter 2021
document
Sokolovskij, R. (author), Iervolino, E. (author), Zhao, Changhui (author), Wang, F. (author), Yu, Hongyu (author), Santagata, F. (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
This paper reports on the layout optimization of Pt-AlGaN/GaN HEMT-sensors for enhancing hydrogen sensor performance. Sensors with gate width and length ratios W<sub>g</sub>/L<sub>g</sub> from 0.25 to 10 were designed, fabricated and tested for the detection of hydrogen gas at 200 °C. Sensitivity, sensing current variation and transient...
conference paper 2017
document
Snel, J.S. (author)
This thesis investigated the mechanical properties and deformation behaviour of accumulative roll-bonded (ARB) Cu/Nb metallic multilayers at nanoscale layer thicknesses and temperatures up to 400 degrees Celsius. Samples with individual layer thicknesses between 7 and 63 nm were nanomechanically tested at room-temperature by micropillar...
master thesis 2016
document
Truong, H.T.X. (author), Martinez, M.J. (author), Ochoa, O.O. (author), Lagoudas, D.C. (author)
In this work, the hybrid interface between metal and thermosetting polymer matrix composite was studied via experimental and numerical investigations. Hybrid laminates, whose constituents are aluminum foil, carbon fabric and epoxy matrix, were manufactured using the vacuum assisted resin transfer molding process. Chromic anodization was used to...
conference paper 2015
document
Zhang, Q. (author)
doctoral thesis 2013
document
Boatemaa, L. (author), Zhou, J. (author), Van der Zwaag, S. (author), Sloof, W.G. (author)
Structural ceramics like alumina are usually brittle and sensitive to flaws leading to a reduction in their mechanical properties. This situation is worsened by machining prior to service and during service by contact, which introduces micro cracks and hidden damages. Crack damage can easily be developed in such ceramics when loaded, which often...
conference paper 2013
document
Boatemaa, L. (author), Zhou, J. (author), Van der Zwaag, S. (author), Sloof, W.G. (author)
Structural ceramics like alumina are usually brittle and sensitive to flaws leading to a reduction in their mechanical properties. This situation is worsened by machining prior to service and during service by contact, which introduces micro cracks and hidden damages. Crack damage can easily be developed in such ceramics when loaded, which often...
conference paper 2013
document
Zhang, Q. (author), Ye, G. (author)
Portland cement paste is a multiphase compound mainly consisting of calcium-silicate-hydrate (CSH) gel, calcium hydroxide (CH) crystal, and unhydrated cement core. When cement paste is exposed to high temperature, the dehydration of cement paste leads to not only the decline in strength, but also the increased pore pressure in the paste. In this...
journal article 2012
document
Zhang, Q. (author), Ye, G. (author)
When a concrete structure is exposed to high temperature, the mechanical damage and chemical transformation take place simultaneously, which will change the microstructure of material. On the other hand, the mechanical properties and transport properties depend on the development of microstructure of cement paste. In order to study the...
journal article 2011
document
Gerber, M.B. (author)
This thesis is concerned with the design and implementation of a power electronic system (14/42V DC/DC converter) that is implemented in the automotive environment, specifically the engine compartment. The power electronic system must have a high power density while operating in a high temperature environment. Power electronic modules are...
doctoral thesis 2005
Searched for: subject%3A%22High%255C%252Btemperature%22
(1 - 13 of 13)