Searched for: subject:"Human%5C+factors"
(1 - 20 of 71)

Pages

document
de Jonge, Michael (author)
Merging is one of the most demanding tasks for a truck driver due to the size, weight and limited visual clearance of a truck. Automating the merging procedure can be the solution for a considerable number of accidents by removing the human factor. People have accepted the risk they are in when driving or being driven but acceptance of automated...
master thesis 2019
document
van der Cammen, T.J.M. (author), Wang, G. (author), Albayrak, A. (author)
contribution to periodical 2019
document
van Gent, P. (author), Farah, H. (author), Nes, Nicole Van (author), van Arem, B. (author)
Persuasive in-vehicle systems aim to intuitively influence the attitudes and/or behaviour of a driver (i.e. without forcing them). However, the challenge in using these systems in a driving setting, is to maximise the persuasive effect without infringing upon the driver's safety. This paper proposes a conceptual model for driver persuasion at...
journal article 2019
document
Barendswaard, S. (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, M. (author)
Vehicle control tasks require simultaneous control of multiple degrees-of-freedom. Most multi-axis human-control modeling is limited to the modeling of multiple fully independent single axes. This paper contributes to the understanding of multi-axis control behavior and draws a more realistic and complete picture of dual-axis manual control....
journal article 2019
document
Eriksson, Alexander (author), Petermeijer, S.M. (author), Zimmermann, Markus (author), de Winter, J.C.F. (author), Bengler, Klaus J. (author), Stanton, Neville A. (author)
This paper assessed four types of human–machine interfaces (HMIs), classified according to the stages of automation proposed by Parasuraman et al. [“A model for types and levels of human interaction with automation,” IEEE Trans. Syst. Man, Cybern. A, Syst. Humans, vol. 30, no. 3, pp. 286–297, May 2000]. We hypothesized that drivers would...
journal article 2019
document
van Lint, J.W.C. (author), Calvert, S.C. (author)
Incorporation of more sophisticated human factors (HF) in mathematical models for driving behavior has become an increasingly popular and important research direction in the last few years. Such models enable us to simulate under which conditions perception errors and risk-taking lead to interactions that result in unsafe traffic conditions...
journal article 2018
document
Bekkers, Rik (author)
Lateral acceleration is a key aspect of the vehicle response perceived by the driver. Assistance systems such as Active Rear Steering (ARS) or Torque Vectoring (TV) are developed to modify the lateral acceleration response such that the vehicle has an improved stability and an extended linear handling region. With this extended linear handling...
master thesis 2018
document
Kempers, Lennaert (author)
This thesis describes what is relevant for interface design for tele-remote driving of heavy road vehicles. A design framework was created to describe what these relevant aspects are. With this design framework a design process is done.
master thesis 2018
document
van Oosterhout, J. (author)
The success of future fusion power plants as a sustainable energy source greatly depends on their uptime. This uptime relies on the plant's maintenance, which must be performed via tele-manipulation. Tele-manipulated maintenance is challenging, as exemplified by strictly selected and highly trained operators who still require more time to work...
doctoral thesis 2018
document
Wesselink, Vincent (author)
Every year over 30.000 patients in the Netherlands alone are operated to repair a damaged meniscus. Damage to the meniscus occurs due to a combination of excessive torque and compression forces on the knee joint. The current arthroscopic cutters that are used during meniscectomies can only reach limited areas of the meniscus. During the...
master thesis 2018
document
Cleij, D. (author), Venrooij, J. (author), Pretto, Paolo (author), Pool, D.M. (author), Mulder, M. (author), Bülthoff, Heinrich H. (author)
Motion cueing algorithms are used in motion simulation to map the inertial vehicle motion onto the limited simulator motion space. This mapping causes mismatches between the unrestricted visual motion and the constrained inertial motion, which results in perceived motion incongruence (PMI). It is still largely unknown what exactly causes...
journal article 2018
document
van der El, K. (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, M. (author)
Due to linear perspective, the visual stimulus provided by a previewed reference trajectory reduces with increasing distance ahead. This paper investigates the effects of linear perspective on human use of preview in manual control tasks. Results of a human-in-the-loop tracking experiment are presented, where the linear perspective&#x0027...
journal article 2018
document
van Gent, P. (author), Farah, H. (author), Nes, N (author), van Arem, B. (author)
Heart rate data are collected often in human factors studies. Advances in open hardware platforms and offtheshelf photoplethysmogram (PPG) sensors allow the nonintrusive collection of heart rate data at very low cost. However, the signal is not trivial to analyse, since the morphology of PPG waveforms differs from electrocardiogram (ECG)...
conference paper 2018
document
Eriksson, A. (author), de Winter, J.C.F. (author), Stanton, Neville A. (author)
Driving simulators have been used since the beginning of the 1930s to assist researchers in assessing driver behaviour without putting the driver in harm’s way. The current manuscript describes the implementation of a toolbox for automated driving research on the widely used STISIM platform. The toolbox presented in this manuscript allows...
journal article 2018
document
Kuipers, J. (author), Wieringa, P.A. (author)
The risk of being involved in an accident in the first year after licensing is greater for novice drivers who passed their driving exam the first time than for novice drivers who failed their first driving exam. Enhanced training programmes can shorten the duration of training and can raise the passing rate on the first exam, but can also...
conference paper 2018
document
Reinders, Marit (author)
Speeding in motorway work zones lowers the perceived safety of road workers and increases the accident risks of traffic participants. In a work zone, traffic participants share the road with road workers. Road workers are often vulnerable and feel threatened by vehicles passing with high speed. Traffic participants are also at risk since driving...
master thesis 2017
document
Meraza Farfan, Paulina (author)
This project represents the graduation project of the MSc Strategic Product of the Industrial Design Faculty at the Delft University of Technology, carried out in collaboration with KLM Royal Dutch Airlines from February to September 2017.

With the steadily increasing challenges of fuel prices, new technologies and competitive...
master thesis 2017
document
Gruppelaar, Virgílio (author)
Reducing conflicts between drivers and assistance systems has become an important issue in recent times, resulting in a need for a better understanding of how humans drive. Current models of driver speed choice on curved roads do not model accelerator and brake pedal deflections, and consequently do not account for the fact that deceleration...
master thesis 2017
document
van der Klauw, Roel (author)
In telemanipulation commonly master and slave have dissimilar workspaces. Workspace extension methods can overcome this mismatch between master and slave. Literature proposes several workspace extension methods for translations such as scaling and indexing. However, for rotations it is unclear how workspace extension methods should be designed....
master thesis 2017
document
Boessenkool, Henri (author), Thomas, Justin (author), Wildenbeest, J.G.W. (author), Heemskerk, Cock J.M. (author), de Baar, Marco R. (author), Steinbuch, Maarten (author), Abbink, D.A. (author)
For the planned teleoperated maintenance of the experimental fusion plant ITER the time performance will be critical. Telemanipulated task execution is however characterised by long execution times compared to similar tasks performed hands-on. There is little quantitative research on task performance of telemanipulated maintenance available...
journal article 2017
Searched for: subject:"Human%5C+factors"
(1 - 20 of 71)

Pages