Searched for: subject:"Interface"
(1 - 20 of 160)

Pages

document
de Jonge, Michael (author)
Merging is one of the most demanding tasks for a truck driver due to the size, weight and limited visual clearance of a truck. Automating the merging procedure can be the solution for a considerable number of accidents by removing the human factor. People have accepted the risk they are in when driving or being driven but acceptance of automated...
master thesis 2019
document
van den Bosch, Valentijn (author)
As a reaction to urban densication, light weight building is an attractive concept for optimally utilizing the capacity of the existing built environment. A common issue paired with light weight construction is the need to engage in vibrational design, in order to minimize hindrance due to human activities such as walking, that cause vibrations...
master thesis 2019
document
Visser, Maaike (author), van der Heijden, Stefan (author), Mironov, Stas (author), Hullegien, Nils (author)
The Organic Rankine Cycle Hybrid Integrated Device (ORCHID) is a small scale power plant that is used to study the fundamental gas dynamic behavior of dense organic fluids, as well as the behavior of turbomachinery. In order to draw accurate conclusions about the raw sensor data generated by the ORCHID one has to know when the system is in...
bachelor thesis 2019
document
Vreugdenhil, Wilco (author)
The technological advancements in the automotive industry have enabled the automation of numerous routine driving tasks. As a result, the art of driving has become a control task with a strong supervisory character, including the common human factor issues. Haptic Shared Control has been shown to be useful in keeping the driver in-the-loop by...
master thesis 2019
document
Krishnan, Vinayak (author)
A novel technique for measuring capillary/gravity waves travelling on air/water interfaces is investigated. The main motivation is to measure the free surface deformations of an air cavity used for air lubrication of ship hulls. Due to limitations in the available techniques, two novel methods are proposed, out of which the Stereo Particle Image...
master thesis 2018
document
Jia, Kangjun (author)
The transport of highly-viscous oil in the core-annular flow regime in a horizontal pipe is investigated with a numerical simulation study. In this flow type the viscous oil is lubricated by a water annulus along the pipe wall. The Launder-Sharma low-Reynolds number k-ε turbulence model is used with the Volume-of-Fluid solver in interFOAM. Three...
master thesis 2018
document
de Visser, Jelmer (author)
This project was performed for a Dutch creative agency with the general objective to demonstrate a new application of personalization in service design. Specifically, the goal was set to stimulate a personalized experience of a future energy dashboard by making the communication of information to users more effective. To that end principles of...
master thesis 2018
document
Liu, Chang (author)
With urbanisation, city life is becoming more efficient and artificial. The pace of living is getting faster and the cosiness of slowing down are disappearing. Social warmth among people are decreasing in anonymous cities and spiritual restoration are being pushed away as nature is being pushed out of the expanding cities. This project tries to...
master thesis 2018
document
Riegman, Rick (author)
With the current and expected growth of air traffic, the need for increased support for air traffic controllers from automation continues to grow. One method of improving air traffic management applies 4D trajectory management to control traffic in real-time. An interface applying this method only allowed for manipulation of trajectory in three...
master thesis 2018
document
Verhaert, Danilo (author)
Tock is an embedded operating system that can run multiple concurrent, mutually distrustful processes, concurrently. Tock is written in Rust, a novel system programming language enforcing type safety at compile-time, and takes advantage of Rust's strong safety features. However, since Tock allows user-level applications to be written in any...
master thesis 2018
document
Mazereeuw, Matthijs (author)
Prosthetic devices remain inaccessible for many amputees in low-income countries. The lack of trained professionals and resources to fit a prosthetic (interface) are principle reasons. The low cost at which additive manufacturing technology (AM) is able to produce a custom made part could change this. As such, the aim of this study was to design...
master thesis 2018
document
Kooijman, Lars (author)
The pedestrian is regarded to be one of the most vulnerable road users. Non-verbal communication between drivers and pedestrians seems to play an important role in the mitigation of collisions. The emergence of autonomous vehicles in traffic in the near future presses the need to investigate objective measures related to pedestrian crossing...
master thesis 2018
document
Vithalkar, Arjun (author)
Concrete is used significantly in many structures since, the last few centuries. The need to maximize the concrete strength and utilize it's complete potential is the main focus of researchers even in today's modern age. It is thus, important to restore the existing structures apart from developing new materials and technology to build new...
student report 2018
document
Zhao, Yihan (author)
Nowadays, the increasing populations and the higher demands of human’s life are creating a high pressure on the environment. Laundry as a routine for all the families, requires a large number of resources especially with regards to its water and energy consumption. With the innovation in both the business model and IoT technology, HOMIE is...
master thesis 2018
document
van Geel, Alexander (author)
Loss of control is the largest contributor to the yearly aviation death toll, with energy mismanagement in low-energy conditions as one of its main causal factors. This has led to a large emphasis from both scientific and aviation safety communities on the prevention of aircraft upset conditions. Changes in aircraft configuration largely impact...
master thesis 2018
document
Ghanmode, Ishan (author)
In today’s digital world, users are often confronted with an abundance of information. Whether the user is looking to compare online prices for products, searching for new movies to watch or music to listen, the available information at hand exceeds the amount of information which the user wants to consider before making a choice. For this,...
master thesis 2018
document
Ganeshan, Sanjay (author)
The CIGRE B1 – B3.49 JWG defined a standardised 145 kV inner-cone GIS cable termination design. This standardisation allows the creation of new common interface insulators. This would eliminate the planning hurdles due to the fact that the cable system is not usually defined at the time of switchgear manufacture. The new design also requires a...
master thesis 2018
document
jonk, steve (author)
The goal of the assignment was to:
Design a high-quality User Experience and User Interface for the Schluss personal data vault.

This user experience should be hands-on, transparent, intuitive and clear. The user interface should feel extremely private, secure and trusted, whilst containing all the data that Schluss users...
master thesis 2018
document
Presilli, Lorenzo (author)
This study aims to get a better understanding of the passing phenomena of a rising gas bubble passing through a liquid-liquid interface. This is done experimentally with a narrow column by capturing the rising gas bubble with high speed imaging. The light phase consists of silicone oil and the heavy phase
consists of water with different...
bachelor thesis 2018
document
Roebroeks, Joppe (author)
Geological surveying is a common practice performed by geologists nowadays. Determining layer orientation parameters and identifying folds are examples of features needed in order to create a geological map or model of the (sub) surface. Surveying is expensive and time consuming, therefore such survey is recently being investigated and...
master thesis 2018
Searched for: subject:"Interface"
(1 - 20 of 160)

Pages