Searched for: subject%3A%22Load%255C+transfer%22
(1 - 14 of 14)
document
Pradena, Mauricio (author), Houben, L.J.M. (author), César, Andrés (author)
Generally, joint performance in concrete pavements is evaluated in laboratory by applying dynamic loads that require large scale experimental setups. In order to propose a simplified laboratory test, a comprehensive literary review of the fundamentals of load transfer at joints is made, and the load transfer efficiency obtained via a reduced...
journal article 2022
document
Gao, Yanmei (author), Li, Chengjun (author), Wang, Xuefei (author), Zhou, Zhixiang (author), Fan, Liang (author), Heng, J. (author)
This paper has investigated the shear-slip behaviour of an innovative prefabricated composite shear stud (PCSS) connector and its application in the prefabricated steel–concrete composite bridges. A series of push-out tests are carried out on a total of 12 specimens, including 6 PCSS specimens and 6 conventional shear stud (CSS) specimens....
journal article 2021
document
Pradena, M.A. (author), Houben, L.J.M. (author), César, Andrés (author)
Aggregate interlock is the dominant load transfer mechanism in non-dowelled Jointed Plain Concrete Pavements, as the innovative short concrete slabs. Although the Load Transfer Efficiency of this pavement innovation is based on that mechanism, the structural design methods do not relate the Load Transfer Efficiency by aggregate interlock with...
journal article 2020
document
Ruijs, Mart (author)
In this paper incremental nonlinear dynamic inversion, a sensor based approximate form of feedback linearization with favorable robustness properties, is applied to the traction control and stability augmentation problem of a Le Mans Prototype 1 race car. A cascaded side-slip and yaw-rate envelope protection system is developed in combination...
master thesis 2018
document
Hangx, R, (author)
In the development of materials used for constructing aircraft, progress has been made in the production, certification and implementation of materials such as Carbon Fibre Reinforced Polymer (CFRP) and Glass Laminate Aluminium Reinforced Epoxy (GLARE). The state-of-the-art in joining techniques however, has not changed much: fastening is still...
master thesis 2017
document
Van Eekelen, S.J.M. (author), Bezuijen, A. (author), Van Tol, A.F. (author)
Van Eekelen et al., 2012a, Van Eekelen et al., 2012b and Van Eekelen et al., 2013) have introduced an analytical model for the design of the geosynthetic reinforcement (GR) in a piled embankment. This paper further validates this model with measurements from seven full-scale tests and four series of scaled model experiments. Most of these...
journal article 2014
document
Kamerling, M.W. (author)
This paper presents the design of a light and robust temporary emergency shelter with a triangulated polyhedral grid to transfer the lateral and vertical loads efficiently. To simplify the construction the variety of the elements is minimized, only two sizes of elements are applied. For the structural grid alternatives are designed using varying...
conference paper 2013
document
Van Eekelen, S.J.M. (author), Bezuijen, A. (author), Van Tol, A.F. (author)
Most analytical models for the design of piled embankments or load transfer platforms with geosynthetic reinforcement (GR) include two calculation steps. Step 1 calculates the arching behaviour in the fill and step 2 the load-deflection behaviour of the GR. A calculation method for step 2 based on the results of model tests has been published by...
journal article 2013
document
Li, K. (author), Liu, W. (author), Markine, V.L. (author), Ma, L. (author)
conference paper 2012
document
Blanc, M. (author), Rault, G. (author), Thorel, L. (author), Almeida, M.S.S. (author), Almeida, M.C.F. (author)
Reinforcing compressible soils by rigid inclusions is a method to reduce and homogenize settlements under many types of structures. A granular mattress, located between the structure and the group of piles, transfers part of the loads on the surface to the head of the piles anchored in rigid substrate. An experimental device, a mobile tray, has...
conference paper 2012
document
Kamerling, M.W. (author)
This paper describes for the Fusée Ceramique vaults the effect of the time dependent deformations concerning the load transfer. Especially the creep and shrinkage of concrete will change the distribution of the loads acting on a Fusée Ceramique vault considerately. Recommendations for infill elements will be given to optimise the load transfer...
conference paper 2011
document
De Rijck, J.J.M. (author)
The two historical fuselage failures, Comet in 1954 and Aloha in 1988, illustrate that similar accidents must be avoided which requires a profound understanding of the fatigue mechanisms involved, including analytical models to predict the fatigue behavior of riveted joints of a fuselage structure. The scope of the research project covers a...
doctoral thesis 2005
document
Mahardika, A. (author)
doctoral thesis 1999
document
van der Linden, H.H. (author)
The report contains the description, results and conclusions of a fatigue test programme which assessed the fatigue lives of fastener systems using different joints. High load transfer single shear joints were evaluated in a core programme; secondary bending and load transfer were determined experimentally. About 750 specimens were fatigue...
report 1985
Searched for: subject%3A%22Load%255C+transfer%22
(1 - 14 of 14)