A Flexure-Based Linear Guide With Torsion Reinforcement Structures

In this study, a flexure-based (compliant) linear guide with a motion range comparable to its footprint is presented. The design consists of two-folded leaf springs on which torsion reinforcement structures are added. Due to these structures, only two-folded leaf springs are needed instead of a minimum of five as in preexisting designs. The...

The application of mechanism based and equivalent frame methods for the seismic assessment of URM terraced houses in Groningen

Since the 60’s the Nederlandse Aardolie Maatschappij (NAM) has been extracting gas from the province of Groningen in the Netherlands. This resulted into seismic activity. However, the buildings in Groningen are not designed to withstand any seismic loading. The assessment of the seismic behavior of the building stock of Groningen is required to...

Applicability study of pulsed laser beam welding on ferritic–martensitic ODS eurofer steel

Pulsed laser beam welding was used successfully to join the oxide dispersion-strengthened (ODS) Eurofer steel. The joining was conducted with a laser power of 2500 W and a pulsed duration of 4 ms. With the filler material being used, a minor material loss and microvoids were observed in the joint. The microstructure of the fusion zone...

Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering

Oxide dispersion strengthened (ODS) steels are considered to be one of the candidate structural materials for advanced nuclear applications due to their high elevated-temperature strength, corrosion resistance, and radiation tolerance. Joining of ODS steels by traditional fusion joining techniques is not applicable, because the melting...

Effect of mechanical alloying and spark plasma sintering on the microstructure and mechanical properties of ODS Eurofer

Oxide dispersion strengthened (ODS)Eurofer steel was prepared via mechanical alloying (MA)and spark plasma sintering (SPS). Different combinations of MA and SPS parameters were adopted in order to optimise the fabrication process. The experimental results show that the sample milled for 30 h, sintered at 1373 K at a pressure of 60 MPa has...

Biodegradation and mechanical behavior of an advanced bioceramic-containing Mg matrix composite synthesized through in-situ solid-state oxidation

Recent studies have shown great potential of Mg matrix composites for biodegradable orthopedic devices. However, the poor structural integrity of these composites, which results in excessive localized corrosion and premature mechanical failure, has hindered their widespread applications. In this research, an in-situ Powder Metallurgy (PM)...